From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Robin van der Gracht <robin@protonic.nl>,
Rob Herring <robh+dt@kernel.org>, Miguel Ojeda <ojeda@kernel.org>,
Paul Burton <paulburton@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Pavel Machek <pavel@ucw.cz>
Cc: devicetree@vger.kernel.org, linux-leds@vger.kernel.org,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v2 00/18] auxdisplay: ht16k33: Add character display support
Date: Fri, 25 Jun 2021 14:58:44 +0200 [thread overview]
Message-ID: <20210625125902.1162428-1-geert@linux-m68k.org> (raw)
Hi all,
The Holtek HT16K33 LED controller is not only used for driving
dot-matrix displays, but also for driving segment displays.
The current auxdisplay driver is limited to dot-matrix displays, which
are exposed as a frame buffer device.
This patch series extends the driver to 4-digit 7-segment and quad
14-segment alphanumeric displays, allowing the user to display and
scroll text messages.
List of patches:
- Patch 1 provides font data for displaying ASCII characters on
14-segment displays,
- Patch 2 updates the HT16K33 DT bindings for segment displays,
- Patches 3-5 contain a bug fix and small improvements for the
Imagination Technologies ASCII LCD Display driver,
- Patch 6 extracts the character line display core support from the
Imagination Technologies ASCII LCD Display driver, for reuse,
- Patches 7-8 contain cleanups and improvements for the character line
display core driver,
- Patches 9-16 contain a bug fix, cleanups and improvements for the
HT16K33 driver, to prepare for segment display support,
- Patch 17 adds support for 7/14-segment displays to the HT16K33
driver,
- Patch 18 adds segment display LED support to the HT16K33 driver,
to make use of hardware blinking, and to expose display color.
Changes compared to v1[1]:
- Fix type of color to uint32,
- "refresh-rate-hz" is still required for dot-matrix displays.
- Move "select LINEDISP" for HT16K33 symbol to correct patch,
- Add backwards compatibility "message" symlink to img-ascii-lcd,
- Connect backlight to fbdev in ht16k33 dot-matrix mode,
- Set "err = -EINVAL" in switch() case that cannot happen,
- Use "auxdisplay" instead of DRIVER_NAME in LED name.
This series has been tested using an Adafruit 0.54" Quad Alphanumeric
Red FeatherWing Display, plugged into an OrangeCrab ECP5-based FPGA
board running linux-on-litex-vexriscv.
7-segment display support is based purely on schematics, and has not
been tested on actual hardware. The changes to img-ascii-lcd.c are also
untested, due to lack of hardware.
Thanks for your comments!
[1] "[PATCH 00/17] auxdisplay: ht16k33: Add character display support"
https://lore.kernel.org/r/20210322144848.1065067-1-geert@linux-m68k.org/
Geert Uytterhoeven (18):
uapi: Add <linux/map_to_14segment.h>
dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays
auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
auxdisplay: img-ascii-lcd: Add helper variable dev
auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit()
auxdisplay: Extract character line display core support
auxdisplay: linedisp: Use kmemdup_nul() helper
auxdisplay: linedisp: Add support for changing scroll rate
auxdisplay: ht16k33: Connect backlight to fbdev
auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize()
auxdisplay: ht16k33: Remove unneeded error check in keypad probe()
auxdisplay: ht16k33: Convert to simple i2c probe function
auxdisplay: ht16k33: Add helper variable dev
auxdisplay: ht16k33: Move delayed work
auxdisplay: ht16k33: Extract ht16k33_brightness_set()
auxdisplay: ht16k33: Extract frame buffer probing
auxdisplay: ht16k33: Add support for segment displays
auxdisplay: ht16k33: Add segment display LED support
.../bindings/auxdisplay/holtek,ht16k33.yaml | 31 +-
drivers/auxdisplay/Kconfig | 8 +
drivers/auxdisplay/Makefile | 1 +
drivers/auxdisplay/ht16k33.c | 458 ++++++++++++++----
drivers/auxdisplay/img-ascii-lcd.c | 206 ++------
drivers/auxdisplay/line-display.c | 261 ++++++++++
drivers/auxdisplay/line-display.h | 43 ++
include/uapi/linux/map_to_14segment.h | 239 +++++++++
8 files changed, 989 insertions(+), 258 deletions(-)
create mode 100644 drivers/auxdisplay/line-display.c
create mode 100644 drivers/auxdisplay/line-display.h
create mode 100644 include/uapi/linux/map_to_14segment.h
--
2.25.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next reply other threads:[~2021-06-25 12:59 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-25 12:58 Geert Uytterhoeven [this message]
2021-06-25 12:58 ` [PATCH v2 01/18] uapi: Add <linux/map_to_14segment.h> Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 02/18] dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays Geert Uytterhoeven
2021-07-14 20:36 ` Rob Herring
2021-07-15 7:12 ` Geert Uytterhoeven
2021-07-15 14:32 ` Rob Herring
2021-07-15 15:06 ` Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 03/18] auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 04/18] auxdisplay: img-ascii-lcd: Add helper variable dev Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 05/18] auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit() Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 06/18] auxdisplay: Extract character line display core support Geert Uytterhoeven
2021-06-25 23:35 ` kernel test robot
2021-06-28 10:17 ` Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 07/18] auxdisplay: linedisp: Use kmemdup_nul() helper Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 08/18] auxdisplay: linedisp: Add support for changing scroll rate Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 09/18] auxdisplay: ht16k33: Connect backlight to fbdev Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 10/18] auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize() Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 11/18] auxdisplay: ht16k33: Remove unneeded error check in keypad probe() Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 12/18] auxdisplay: ht16k33: Convert to simple i2c probe function Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 13/18] auxdisplay: ht16k33: Add helper variable dev Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 14/18] auxdisplay: ht16k33: Move delayed work Geert Uytterhoeven
2021-06-25 12:58 ` [PATCH v2 15/18] auxdisplay: ht16k33: Extract ht16k33_brightness_set() Geert Uytterhoeven
2021-06-25 12:59 ` [PATCH v2 16/18] auxdisplay: ht16k33: Extract frame buffer probing Geert Uytterhoeven
2021-06-25 12:59 ` [PATCH v2 17/18] auxdisplay: ht16k33: Add support for segment displays Geert Uytterhoeven
2021-06-25 12:59 ` [PATCH v2 18/18] auxdisplay: ht16k33: Add segment display LED support Geert Uytterhoeven
2021-06-25 20:39 ` Marek Behun
2021-06-25 20:40 ` Marek Behun
2021-06-28 9:21 ` Geert Uytterhoeven
2021-06-28 9:21 ` Geert Uytterhoeven
2021-06-28 10:15 ` Marek Behun
2021-06-28 15:33 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210625125902.1162428-1-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=ojeda@kernel.org \
--cc=paulburton@kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=robin@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).