From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Tony Lindgren <tony@atomide.com>, Sasha Levin <sashal@kernel.org>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
Date: Wed, 14 Jul 2021 15:44:49 -0400 [thread overview]
Message-ID: <20210714194513.54827-27-sashal@kernel.org> (raw)
In-Reply-To: <20210714194513.54827-1-sashal@kernel.org>
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ]
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra71-evm.dts | 2 +-
arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
arch/arm/boot/dts/dra76-evm.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index de7f85efaa51..498ccb46bca8 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -332,7 +332,7 @@ pcf_hdmi: gpio@26 {
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index fabeb7704753..88178a64b04f 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -158,7 +158,7 @@ &pcf_gpio_21 {
};
&pcf_hdmi {
- p0 {
+ hdmi-i2c-disable-hog {
/*
* PM_OEn to High: Disable routing I2C3 to PM_I2C
* With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8641a3d7d8ad..3638e0cefe38 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -261,7 +261,7 @@ pcf_hdmi: pcf8575@26 {
*/
lines-initial-states = <0x0f2b>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..9bcb91841a02 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -292,7 +292,7 @@ pcf_hdmi: pcf8575@26 {
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
--
2.30.2
next prev parent reply other threads:[~2021-07-14 19:49 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 15/51] ARM: NSP: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: " Sasha Levin
2021-07-14 19:44 ` Sasha Levin [this message]
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210714194513.54827-27-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).