From: Chris Morgan <macroalpha82@gmail.com>
To: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org, heiko@sntech.de, maccraft123mc@gmail.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH] arm64: dts: rockchip: Correct regulator for USB host
Date: Tue, 20 Jul 2021 15:23:54 -0500 [thread overview]
Message-ID: <20210720202354.5179-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
When writing a battery driver, I noticed that the USB voltage was ~3.7V
while running off of battery on a mainline kernel. After consulting the
schematics for the Odroid Go Advance, it appears that the BOOST
regulator is involved in the process of powering the USB host. Power
for the USB host goes from the vccsys regulator into the PMIC, then out
from the PMIC BOOST regulator into the FC9516A (which is controlled by
GPIO), which then feeds power into the USB host. I also added the
vcc_host regulator as the phy-supply for the host USB port, which
accurately describes the hardware. I named the regulator usb_midu
because on the datasheet the pin is described as "MIDU/BOOST - middle
point of USB power supply / boost output". Making these changes solved
the USB power issue on battery and I'm now reading approximately 5V.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 7fc674a99a6c..79d2f86ab46d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -207,7 +207,7 @@ vcc_host: vcc_host {
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
- vin-supply = <&vccsys>;
+ vin-supply = <&usb_midu>;
};
};
@@ -311,6 +311,7 @@ rk817: pmic@20 {
vcc5-supply = <&vccsys>;
vcc6-supply = <&vccsys>;
vcc7-supply = <&vccsys>;
+ vcc8-supply = <&vccsys>;
regulators {
vdd_logic: DCDC_REG1 {
@@ -460,6 +461,14 @@ regulator-state-mem {
regulator-suspend-microvolt = <3000000>;
};
};
+
+ usb_midu: BOOST {
+ regulator-name = "usb_midu";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
rk817_codec: codec {
@@ -525,6 +534,7 @@ &u2phy {
status = "okay";
u2phy_host: host-port {
+ phy-supply = <&vcc_host>;
status = "okay";
};
--
2.25.1
reply other threads:[~2021-07-20 20:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210720202354.5179-1-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=maccraft123mc@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).