Re: [“PATCH” 1/2] dt-bindings: spi: Add bindings for Intel Thunder Bay SoC

[Serge Semin <fancer.lancer@gmail.com>]

On Thu, Jul 22, 2021 at 01:33:57PM +0800, nandhini.srikandan@intel.com wrote:
> From: Nandhini Srikandan <nandhini.srikandan@intel.com>
> 

> Add documentation for SPI controller in Intel Thunder Bay SoC.

In the driver-part of the patchset you said that the reset control
is required for this controller. Then the bindings file needs to be
accordingly altered. See the way it's done in the "allOf:" block here.

If it isn't required then this part looks ok to me.

Regards,
-Sergey

> 
> Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
> ---
>  Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> index ca91201a9926..88532bf8ba85 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> @@ -61,6 +61,8 @@ properties:
>            - const: snps,dw-apb-ssi
>        - description: Intel Keem Bay SPI Controller
>          const: intel,keembay-ssi
> +      - description: Intel Thunder Bay SPI Controller
> +        const: intel,thunderbay-ssi
>        - description: Baikal-T1 SPI Controller
>          const: baikal,bt1-ssi
>        - description: Baikal-T1 System Boot SPI Controller
> -- 
> 2.17.1
>