From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] drm/panel: simple: Add support for two more AUO panels
Date: Mon, 26 Jul 2021 10:33:00 -0700 [thread overview]
Message-ID: <20210726173300.432039-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20210726173300.432039-1-bjorn.andersson@linaro.org>
Add definition of the AUO B133HAN05.4 13.3" FHD panel and the
B140HAN06.4 14.0" FHD panel.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/gpu/drm/panel/panel-simple.c | 66 ++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 21939d4352cf..fcf6cbbfdedb 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1080,6 +1080,36 @@ static const struct panel_desc auo_b133xtn01 = {
},
};
+static const struct drm_display_mode auo_b133han05_mode = {
+ .clock = 142600,
+ .hdisplay = 1920,
+ .hsync_start = 1920 + 58,
+ .hsync_end = 1920 + 58 + 42,
+ .htotal = 1920 + 58 + 42 + 60,
+ .vdisplay = 1080,
+ .vsync_start = 1080 + 3,
+ .vsync_end = 1080 + 3 + 5,
+ .vtotal = 1080 + 3 + 5 + 54,
+};
+
+static const struct panel_desc auo_b133han05 = {
+ .modes = &auo_b133han05_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 293,
+ .height = 165,
+ },
+ .delay = {
+ .prepare = 100,
+ .enable = 20,
+ .unprepare = 50,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
+ .connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
static const struct drm_display_mode auo_b133htn01_mode = {
.clock = 150660,
.hdisplay = 1920,
@@ -1107,6 +1137,36 @@ static const struct panel_desc auo_b133htn01 = {
},
};
+static const struct drm_display_mode auo_b140han06_mode = {
+ .clock = 141000,
+ .hdisplay = 1920,
+ .hsync_start = 1920 + 16,
+ .hsync_end = 1920 + 16 + 16,
+ .htotal = 1920 + 16 + 16 + 152,
+ .vdisplay = 1080,
+ .vsync_start = 1080 + 3,
+ .vsync_end = 1080 + 3 + 14,
+ .vtotal = 1080 + 3 + 14 + 19,
+};
+
+static const struct panel_desc auo_b140han06 = {
+ .modes = &auo_b140han06_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 309,
+ .height = 174,
+ },
+ .delay = {
+ .prepare = 100,
+ .enable = 20,
+ .unprepare = 50,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
+ .connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
static const struct display_timing auo_g070vvn01_timings = {
.pixelclock = { 33300000, 34209000, 45000000 },
.hactive = { 800, 800, 800 },
@@ -4233,9 +4293,15 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,b116xw03",
.data = &auo_b116xw03,
+ }, {
+ .compatible = "auo,b133han05",
+ .data = &auo_b133han05,
}, {
.compatible = "auo,b133htn01",
.data = &auo_b133htn01,
+ }, {
+ .compatible = "auo,b140han06",
+ .data = &auo_b140han06,
}, {
.compatible = "auo,b133xtn01",
.data = &auo_b133xtn01,
--
2.29.2
next prev parent reply other threads:[~2021-07-26 17:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-26 17:32 [PATCH 1/2] dt-bindings: display: simple: Add AUO B133HAN05 & B140HAN06 Bjorn Andersson
2021-07-26 17:33 ` Bjorn Andersson [this message]
2021-07-29 23:40 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210726173300.432039-2-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).