From: Linus Walleij <linus.walleij@linaro.org>
To: Jens Axboe <axboe@kernel.dk>, linux-ide@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Imre Kaloz <kaloz@openwrt.org>,
Krzysztof Halasa <khalasa@piap.pl>,
Linus Walleij <linus.walleij@linaro.org>,
devicetree@vger.kernel.org
Subject: [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
Date: Sat, 31 Jul 2021 23:35:54 +0200 [thread overview]
Message-ID: <20210731213555.2965356-4-linus.walleij@linaro.org> (raw)
In-Reply-To: <20210731213555.2965356-1-linus.walleij@linaro.org>
This adds device tree bindings for the Intel IXP4xx compact flash card
interface.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Itemize the registers
- Drop the epansion bus set-up to alleviate warnings
---
.../ata/intel,ixp4xx-compact-flash.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
new file mode 100644
index 000000000000..52e18600ecff
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/intel,ixp4xx-compact-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx CompactFlash Card Controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ The IXP4xx network processors have a CompactFlash interface that presents
+ a CompactFlash card to the system as a true IDE (parallel ATA) device. The
+ device is always connected to the expansion bus of the IXP4xx SoCs using one
+ or two chip select areas and address translating logic on the board. The
+ node must be placed inside a chip select node on the IXP4xx expansion bus.
+
+properties:
+ compatible:
+ const: intel,ixp4xx-compact-flash
+
+ reg:
+ items:
+ - description: Command interface registers
+ - description: Control interface registers
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: pata-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus@c4000000 {
+ compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+ reg = <0xc4000000 0x1000>;
+ native-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+ dma-ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+ ide@1,0 {
+ compatible = "intel,ixp4xx-compact-flash";
+ reg = <1 0x00000000 0x1000>, <1 0x00040000 0x1000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+...
--
2.31.1
next parent reply other threads:[~2021-07-31 21:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210731213555.2965356-1-linus.walleij@linaro.org>
2021-07-31 21:35 ` Linus Walleij [this message]
2021-08-02 13:39 ` [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings Rob Herring
2021-08-02 16:30 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210731213555.2965356-4-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=axboe@kernel.dk \
--cc=devicetree@vger.kernel.org \
--cc=kaloz@openwrt.org \
--cc=khalasa@piap.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).