From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Evan Green <evgreen@chromium.org>, Tomasz Figa <tfiga@google.com>,
Tomasz Figa <tfiga@chromium.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>,
Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
<chao.hao@mediatek.com>
Subject: [PATCH v2 24/29] iommu/mediatek: Add bank_nr and bank_enable
Date: Fri, 13 Aug 2021 14:53:19 +0800 [thread overview]
Message-ID: <20210813065324.29220-25-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210813065324.29220-1-yong.wu@mediatek.com>
Prepare for supporting multi banks, Adds two variables in the plat_data:
bank_nr: the bank number that this SoC support;
bank_enable: list if the banks is enabled.
Add them for all the current SoC, bank_nr always is 1 and only
bank_enable[0] is enabled.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 18 ++++++++++++++++++
drivers/iommu/mtk_iommu.h | 3 +++
2 files changed, 21 insertions(+)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index cd86151c5181..5b9891b2be6c 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1137,6 +1137,8 @@ static const struct mtk_iommu_plat_data mt2712_data = {
NOT_STD_AXI_MODE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
@@ -1147,6 +1149,8 @@ static const struct mtk_iommu_plat_data mt6779_data = {
.flags = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
NOT_STD_AXI_MODE | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
@@ -1157,6 +1161,8 @@ static const struct mtk_iommu_plat_data mt8167_data = {
.flags = RESET_AXI | HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}}, /* Linear mapping. */
@@ -1168,6 +1174,8 @@ static const struct mtk_iommu_plat_data mt8173_data = {
HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
@@ -1177,6 +1185,8 @@ static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
.flags = RESET_AXI | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
@@ -1188,6 +1198,8 @@ static const struct mtk_iommu_plat_data mt8192_data = {
WR_THROT_EN | IOVA_34_EN | NOT_STD_AXI_MODE |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
@@ -1199,6 +1211,8 @@ static const struct mtk_iommu_plat_data mt8195_data_infra = {
.flags = WR_THROT_EN | DCM_DISABLE |
MTK_IOMMU_TYPE_INFRA | IFA_IOMMU_PCIe_SUPPORT,
.pericfg_comp_str = "mediatek,mt8195-pericfg_ao",
+ .bank_nr = 1,
+ .bank_enable = {true},
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
@@ -1211,6 +1225,8 @@ static const struct mtk_iommu_plat_data mt8195_data_vdo = {
SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
@@ -1224,6 +1240,8 @@ static const struct mtk_iommu_plat_data mt8195_data_vpp = {
SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{1}, {3}, {22, 0, 0, 0, 23}, {8},
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 80dc08468eda..7a8d6a233d14 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -62,6 +62,9 @@ struct mtk_iommu_plat_data {
struct list_head *hw_list;
unsigned int iova_region_nr;
const struct mtk_iommu_iova_region *iova_region;
+
+ unsigned int bank_nr;
+ bool bank_enable[MTK_IOMMU_BANK_MAX];
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
--
2.18.0
next prev parent reply other threads:[~2021-08-13 6:57 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-13 6:52 [PATCH v2 00/29] MT8195 IOMMU SUPPORT Yong Wu
2021-08-13 6:52 ` [PATCH v2 01/29] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU Yong Wu
2021-08-13 6:52 ` [PATCH v2 02/29] dt-bindings: mediatek: mt8195: Add binding for infra IOMMU Yong Wu
2021-08-17 21:44 ` Rob Herring
2021-08-13 6:52 ` [PATCH v2 03/29] iommu/mediatek: Fix 2 HW sharing pgtable issue Yong Wu
2021-08-13 6:52 ` [PATCH v2 04/29] iommu/mediatek: Adapt sharing and non-sharing pgtable case Yong Wu
2021-08-13 6:53 ` [PATCH v2 05/29] iommu/mediatek: Add 12G~16G support for multi domains Yong Wu
2021-08-13 6:53 ` [PATCH v2 06/29] iommu/mediatek: Add a flag DCM_DISABLE Yong Wu
2021-08-13 6:53 ` [PATCH v2 07/29] iommu/mediatek: Add a flag NON_STD_AXI Yong Wu
2021-08-13 6:53 ` [PATCH v2 08/29] iommu/mediatek: Remove for_each_m4u in tlb_sync_all Yong Wu
2021-08-13 6:53 ` [PATCH v2 09/29] iommu/mediatek: Add tlb_lock in tlb_flush_all Yong Wu
2021-08-13 6:53 ` [PATCH v2 10/29] iommu/mediatek: Remove the granule in the tlb flush Yong Wu
2021-08-13 6:53 ` [PATCH v2 11/29] iommu/mediatek: Always pm_runtime_get while " Yong Wu
2021-08-24 7:10 ` Hsin-Yi Wang
2021-09-01 12:10 ` Yong Wu (吴勇)
2021-09-30 11:26 ` Dafna Hirschfeld
2021-10-07 3:00 ` Yong Wu
2021-08-13 6:53 ` [PATCH v2 12/29] iommu/mediatek: Always enable output PA over 32bits in isr Yong Wu
2021-08-13 6:53 ` [PATCH v2 13/29] iommu/mediatek: Add SUB_COMMON_3BITS flag Yong Wu
2021-08-13 6:53 ` [PATCH v2 14/29] iommu/mediatek: Add IOMMU_TYPE flag Yong Wu
2021-08-13 6:53 ` [PATCH v2 15/29] iommu/mediatek: Contain MM IOMMU flow with the MM TYPE Yong Wu
2021-08-13 6:53 ` [PATCH v2 16/29] iommu/mediatek: Adjust device link when it is sub-common Yong Wu
2021-08-24 7:35 ` Hsin-Yi Wang
2021-09-01 12:01 ` Yong Wu (吴勇)
2021-08-13 6:53 ` [PATCH v2 17/29] iommu/mediatek: Add infra iommu support Yong Wu
2021-08-13 6:53 ` [PATCH v2 18/29] iommu/mediatek: Add PCIe support Yong Wu
2021-08-13 6:53 ` [PATCH v2 19/29] iommu/mediatek: Add mt8195 support Yong Wu
2021-08-13 6:53 ` [PATCH v2 20/29] iommu/mediatek: Only adjust code about register base Yong Wu
2021-08-13 6:53 ` [PATCH v2 21/29] iommu/mediatek: Just move code position in hw_init Yong Wu
2021-08-13 6:53 ` [PATCH v2 22/29] iommu/mediatek: Add mtk_iommu_bank_data structure Yong Wu
2021-08-13 6:53 ` [PATCH v2 23/29] iommu/mediatek: Initialise bank HW for each a bank Yong Wu
2021-08-13 6:53 ` Yong Wu [this message]
2021-08-13 6:53 ` [PATCH v2 25/29] iommu/mediatek: Change the domid to iova_region_id Yong Wu
2021-08-13 6:53 ` [PATCH v2 26/29] iommu/mediatek: Get the proper bankid for multi banks Yong Wu
2021-08-13 6:53 ` [PATCH v2 27/29] iommu/mediatek: Initialise/Remove for multi bank dev Yong Wu
2021-08-13 6:53 ` [PATCH v2 28/29] iommu/mediatek: Backup/restore regsiters for multi banks Yong Wu
2021-08-13 6:53 ` [PATCH v2 29/29] iommu/mediatek: mt8195: Enable multi banks for infra iommu Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210813065324.29220-25-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=chao.hao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=evgreen@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=tfiga@google.com \
--cc=will@kernel.org \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).