[PATCH v10 12/12] ARM: dts: imx7d: remarkable2: add wacom digitizer device

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Alistair Francis <alistair@alistair23.me>
To: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, pinglinux@gmail.com,
	tatsunosuke.tobita@wacom.com, junkpainting@gmail.com,
	ping.cheng@wacom.com
Cc: linux-kernel@vger.kernel.org, alistair23@gmail.com,
	robh+dt@kernel.org, devicetree@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v10 12/12] ARM: dts: imx7d: remarkable2: add wacom digitizer device
Date: Sun, 29 Aug 2021 19:19:25 +1000	[thread overview]
Message-ID: <20210829091925.190-14-alistair@alistair23.me> (raw)
In-Reply-To: <20210829091925.190-1-alistair@alistair23.me>

Enable the wacom_i2c touchscreen for the reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 61 +++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..052f9da32398 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,19 @@ reg_brcm: regulator-brcm {
 		startup-delay-us = <150>;
 	};
 
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -51,6 +64,28 @@ &clks {
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "wacom,i2c-30";
+		reg = <0x09>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		flip-tilt-x;
+		flip-tilt-y;
+		flip-pos-x;
+		flip-pos-y;
+		flip-distance;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -117,6 +152,25 @@ &wdog1 {
 	fsl,ext-reset-output;
 };
 
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 /* FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 /* WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 /* WACOM RESET */
+		>;
+	};
+};
+
 &iomuxc {
 	pinctrl_brcm_reg: brcmreggrp {
 		fsl,pins = <
@@ -125,6 +179,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1

     prev parent reply	other threads:[~2021-08-29  9:20 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-29  9:19 [PATCH v10 00/12] Add Wacom I2C support to rM2 Alistair Francis
2021-08-29  9:19 ` [PATCH v10 01/12] dt-bindings: Add Wacom to vendor bindings Alistair Francis
2021-08-29  9:19 ` [PATCH] Input: wacom_i2c - Allow flipping the values from the DT Alistair Francis
2021-08-29  9:19 ` [PATCH v10 02/12] dt-bindings: touchscreen: Initial commit of wacom,i2c Alistair Francis
2021-08-29  9:19 ` [PATCH v10 03/12] Input: wacom_i2c - Add device tree support to wacom_i2c Alistair Francis
2021-08-29  9:19 ` [PATCH v10 04/12] Input: wacom_i2c - Add touchscren properties Alistair Francis
2021-08-29  9:19 ` [PATCH v10 05/12] Input: wacom_i2c - Read the descriptor values Alistair Francis
2021-08-30 20:44   ` Dmitry Torokhov
     [not found]     ` <PA4PR07MB7407FE9FE271191AC52F7EA387CE9@PA4PR07MB7407.eurprd07.prod.outlook.com>
2021-09-07  6:05       ` Dmitry Torokhov
     [not found]         ` <CAF8JNh+PcYuaLL=ToS0hOT62YbVmMWY9BCT-CGx_x+AkKuO_Tw@mail.gmail.com>
2021-09-08  5:55           ` Dmitry Torokhov
2021-09-10  4:10             ` Tobita, Tatsunosuke
2021-10-06  7:08               ` Tobita, Tatsunosuke
2021-10-06 18:02                 ` Dmitry Torokhov
2021-10-12 23:41                   ` Tobita, Tatsunosuke
2021-09-17 20:43             ` Ping Cheng
2021-09-21  4:35               ` Dmitry Torokhov
2021-09-29  7:50                 ` Alistair Francis
2021-08-29  9:19 ` [PATCH v10 06/12] Input: wacom_i2c - Add support for distance and tilt x/y Alistair Francis
2021-08-29  9:19 ` [PATCH v10 07/12] Input: wacom_i2c - Clean up the query device fields Alistair Francis
2021-08-31 22:28   ` Kari Argillander
2021-08-29  9:19 ` [PATCH v10 08/12] Input: wacom_i2c - Add support for vdd regulator Alistair Francis
2021-08-29  9:19 ` [PATCH v10 09/12] Input: wacom_i2c - Use macros for the bit masks Alistair Francis
2021-08-29  9:19 ` [PATCH v10 10/12] Input: wacom_i2c - Allow flipping the values from the DT Alistair Francis
2021-08-31 21:54   ` Rob Herring
2021-08-29  9:19 ` [PATCH v10 11/12] ARM: imx_v6_v7_defconfig: Enable Wacom I2C Alistair Francis
2021-08-29  9:19 ` Alistair Francis [this message]

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:89cbf13097a dfblob:052f9da3239 )
 OR (
bs:"[PATCH v10 12/12] ARM: dts: imx7d: remarkable2: add wacom digitizer device" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210829091925.190-14-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=junkpainting@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ping.cheng@wacom.com \
    --cc=pinglinux@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tatsunosuke.tobita@wacom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).