From: Jonathan Cameron <jic23@kernel.org>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh+dt@kernel.org>,
Lee Jones <lee.jones@linaro.org>,
bcousson@baylibre.com, Tony Lindgren <tony@atomide.com>,
Tero Kristo <t-kristo@ti.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
"Ryan J . Barnett" <ryan.barnett@collins.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-input@vger.kernel.org, linux-omap@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: Re: [PATCH 31/40] iio: adc: ti_am335x_adc: Fix style
Date: Mon, 30 Aug 2021 15:16:31 +0100 [thread overview]
Message-ID: <20210830151631.051af320@jic23-huawei> (raw)
In-Reply-To: <20210825152518.379386-32-miquel.raynal@bootlin.com>
On Wed, 25 Aug 2021 17:25:09 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> These warnings are reported by checkpatch.pl essentially.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
A few trivial comments inline, but otherwise lgtm
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> drivers/iio/adc/ti_am335x_adc.c | 104 ++++++++++++++++----------------
> 1 file changed, 52 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> index a5da1fedbc5c..dd2200d2f214 100644
> --- a/drivers/iio/adc/ti_am335x_adc.c
> +++ b/drivers/iio/adc/ti_am335x_adc.c
> @@ -57,7 +57,7 @@ static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
> }
>
> static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
> - unsigned int val)
> + unsigned int val)
> {
> writel(val, adc->mfd_tscadc->tscadc_base + reg);
> }
> @@ -72,7 +72,7 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
> }
>
> static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
> - struct iio_chan_spec const *chan)
> + struct iio_chan_spec const *chan)
> {
> int i;
>
> @@ -110,8 +110,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> * Channel would represent which analog input
> * needs to be given to ADC to digitalize data.
> */
> -
> -
> for (i = 0; i < adc_dev->channels; i++) {
> int chan;
>
> @@ -124,9 +122,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> }
>
> if (adc_dev->step_avg[i])
> - stepconfig =
> - STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
> - STEPCONFIG_FIFO1;
> + stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
> + STEPCONFIG_FIFO1;
> else
> stepconfig = STEPCONFIG_FIFO1;
>
> @@ -134,10 +131,9 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> stepconfig |= STEPCONFIG_MODE_SWCNT;
>
> tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
> - stepconfig | STEPCONFIG_INP(chan) |
> - STEPCONFIG_INM_ADCREFM |
> - STEPCONFIG_RFP_VREFP |
> - STEPCONFIG_RFM_VREFN);
> + stepconfig | STEPCONFIG_INP(chan) |
> + STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
> + STEPCONFIG_RFM_VREFN);
>
> if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) {
> dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
> @@ -152,8 +148,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> }
>
> tiadc_writel(adc_dev, REG_STEPDELAY(steps),
> - STEPDELAY_OPEN(adc_dev->open_delay[i]) |
> - STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
> + STEPDELAY_OPEN(adc_dev->open_delay[i]) |
> + STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
>
> adc_dev->channel_step[i] = steps;
> steps++;
> @@ -178,10 +174,12 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
> config = tiadc_readl(adc_dev, REG_CTRL);
> config &= ~(CNTRLREG_SSENB);
> tiadc_writel(adc_dev, REG_CTRL, config);
> - tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
> - | IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
> + tiadc_writel(adc_dev, REG_IRQSTATUS,
> + IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW |
> + IRQENB_FIFO1THRES);
>
> - /* wait for idle state.
> + /*
> + * Wait for the idle state.
> * ADC needs to finish the current conversion
> * before disabling the module
> */
> @@ -209,11 +207,11 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)
>
> fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
> for (k = 0; k < fifo1count; k = k + i) {
> - for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
> + for (i = 0; i < (indio_dev->scan_bytes / 2); i++) {
Do we need those internal brackets at all?
> read = tiadc_readl(adc_dev, REG_FIFO1);
> data[i] = read & FIFOREAD_DATA_MASK;
> }
> - iio_push_to_buffers(indio_dev, (u8 *) data);
> + iio_push_to_buffers(indio_dev, (u8 *)data);
> }
>
> tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
> @@ -246,6 +244,7 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
> struct dma_async_tx_descriptor *desc;
>
> dma->current_period = 0; /* We start to fill period 0 */
> +
> /*
> * Make the fifo thresh as the multiple of total number of
> * channels enabled, so make sure that cyclic DMA period
> @@ -255,9 +254,10 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
> */
> dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
> adc_dev->total_ch_enabled) - 1;
> +
> /* Make sure that period length is multiple of fifo thresh level */
> dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
> - (dma->fifo_thresh + 1) * sizeof(u16));
> + (dma->fifo_thresh + 1) * sizeof(u16));
>
> dma->conf.src_maxburst = dma->fifo_thresh + 1;
> dmaengine_slave_config(dma->chan, &dma->conf);
> @@ -288,9 +288,9 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
> struct tiadc_device *adc_dev = iio_priv(indio_dev);
> int i, fifo1count;
>
> - tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
> - IRQENB_FIFO1OVRRUN |
> - IRQENB_FIFO1UNDRFLW));
> + tiadc_writel(adc_dev, REG_IRQCLR,
> + IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
> + IRQENB_FIFO1UNDRFLW);
>
> /* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
> fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
> @@ -320,8 +320,9 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
>
> am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
>
> - tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES
> - | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
> + tiadc_writel(adc_dev, REG_IRQSTATUS,
> + IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
> + IRQENB_FIFO1UNDRFLW);
>
> irq_enable = IRQENB_FIFO1OVRRUN;
> if (!dma->chan)
> @@ -337,8 +338,9 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
> struct tiadc_dma *dma = &adc_dev->dma;
> int fifo1count, i;
>
> - tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
> - IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
> + tiadc_writel(adc_dev, REG_IRQCLR,
> + IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
> + IRQENB_FIFO1UNDRFLW);
> am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
> adc_dev->buffer_en_ch_steps = 0;
> adc_dev->total_ch_enabled = 0;
> @@ -370,12 +372,11 @@ static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
> };
>
> static int tiadc_iio_buffered_hardware_setup(struct device *dev,
> - struct iio_dev *indio_dev,
> - irqreturn_t (*pollfunc_bh)(int irq, void *p),
> - irqreturn_t (*pollfunc_th)(int irq, void *p),
> - int irq,
> - unsigned long flags,
> - const struct iio_buffer_setup_ops *setup_ops)
> + struct iio_dev *indio_dev,
I would consider this particular form fine to keep line lengths down.
It's not very important now we have some more slack up to 100 chars though.
> + irqreturn_t (*pollfunc_bh)(int irq, void *p),
> + irqreturn_t (*pollfunc_th)(int irq, void *p),
> + int irq, unsigned long flags,
> + const struct iio_buffer_setup_ops *setup_ops)
> {
> int ret;
>
> @@ -386,7 +387,7 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev,
> return ret;
>
> return devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh,
> - flags, indio_dev->name, indio_dev);
> + flags, indio_dev->name, indio_dev);
> }
>
> static const char * const chan_name_ain[] = {
> @@ -411,12 +412,11 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
> indio_dev->num_channels = channels;
> chan_array = devm_kcalloc(dev, channels, sizeof(*chan_array),
> GFP_KERNEL);
> - if (chan_array == NULL)
> + if (!chan_array)
> return -ENOMEM;
>
> chan = chan_array;
> for (i = 0; i < channels; i++, chan++) {
> -
> chan->type = IIO_VOLTAGE;
> chan->indexed = 1;
> chan->channel = adc_dev->channel_line[i];
> @@ -434,8 +434,8 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
> }
>
> static int tiadc_read_raw(struct iio_dev *indio_dev,
> - struct iio_chan_spec const *chan,
> - int *val, int *val2, long mask)
> + struct iio_chan_spec const *chan, int *val, int *val2,
> + long mask)
> {
> struct tiadc_device *adc_dev = iio_priv(indio_dev);
> int ret = IIO_VAL_INT;
> @@ -459,9 +459,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
>
> am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
>
> - timeout = jiffies + msecs_to_jiffies
> - (IDLE_TIMEOUT * adc_dev->channels);
> /* Wait for Fifo threshold interrupt */
> + timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT * adc_dev->channels);
> while (1) {
> fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
> if (fifo1count)
> @@ -473,6 +472,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
> goto err_unlock;
> }
> }
> +
> map_val = adc_dev->channel_step[chan->scan_index];
>
> /*
> @@ -490,13 +490,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
> if (stepid == map_val) {
> read = read & FIFOREAD_DATA_MASK;
> found = true;
> - *val = (u16) read;
> + *val = (u16)read;
> }
> }
> +
> am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
>
> if (!found)
> - ret = -EBUSY;
> + ret = -EBUSY;
>
> err_unlock:
> mutex_unlock(&adc_dev->fifo1_lock);
> @@ -537,6 +538,7 @@ static int tiadc_request_dma(struct platform_device *pdev,
> goto err;
>
> return 0;
> +
> err:
> dma_release_channel(dma->chan);
> return -ENOMEM;
> @@ -586,7 +588,7 @@ static int tiadc_probe(struct platform_device *pdev)
> }
>
> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
> - if (indio_dev == NULL) {
> + if (!indio_dev) {
> dev_err(&pdev->dev, "failed to allocate iio device\n");
> return -ENOMEM;
> }
> @@ -608,12 +610,11 @@ static int tiadc_probe(struct platform_device *pdev)
> return err;
>
> err = tiadc_iio_buffered_hardware_setup(&pdev->dev, indio_dev,
> - &tiadc_worker_h,
> - &tiadc_irq_h,
> - adc_dev->mfd_tscadc->irq,
> - IRQF_SHARED,
> - &tiadc_buffer_setup_ops);
> -
> + &tiadc_worker_h,
> + &tiadc_irq_h,
> + adc_dev->mfd_tscadc->irq,
> + IRQF_SHARED,
> + &tiadc_buffer_setup_ops);
> if (err)
> goto err_free_channels;
>
> @@ -664,8 +665,7 @@ static int __maybe_unused tiadc_suspend(struct device *dev)
>
> idle = tiadc_readl(adc_dev, REG_CTRL);
> idle &= ~(CNTRLREG_SSENB);
> - tiadc_writel(adc_dev, REG_CTRL, (idle |
> - CNTRLREG_POWERDOWN));
> + tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN);
>
> return 0;
> }
> @@ -678,12 +678,12 @@ static int __maybe_unused tiadc_resume(struct device *dev)
>
> /* Make sure ADC is powered up */
> restore = tiadc_readl(adc_dev, REG_CTRL);
> - restore &= ~(CNTRLREG_POWERDOWN);
> + restore &= ~CNTRLREG_POWERDOWN;
> tiadc_writel(adc_dev, REG_CTRL, restore);
>
> tiadc_step_config(indio_dev);
> am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
> - adc_dev->buffer_en_ch_steps);
> + adc_dev->buffer_en_ch_steps);
> return 0;
> }
>
next prev parent reply other threads:[~2021-08-30 14:13 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-25 15:24 [PATCH 00/40] TI AM437X ADC1 Miquel Raynal
2021-08-25 15:24 ` [PATCH 01/40] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
2021-08-25 15:24 ` [PATCH 02/40] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD Miquel Raynal
2021-08-30 12:47 ` Jonathan Cameron
2021-09-02 17:35 ` Miquel Raynal
2021-08-31 19:33 ` Rob Herring
2021-08-25 15:24 ` [PATCH 03/40] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Miquel Raynal
2021-08-30 13:36 ` Jonathan Cameron
2021-09-02 17:45 ` Miquel Raynal
2021-09-05 11:58 ` Jonathan Cameron
2021-08-31 19:37 ` Rob Herring
2021-09-01 7:42 ` Miquel Raynal
2021-08-25 15:24 ` [PATCH 04/40] dt-bindings: iio: adc: ti,am3359-adc: " Miquel Raynal
2021-08-30 12:31 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 05/40] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file Miquel Raynal
2021-08-30 12:39 ` Jonathan Cameron
2021-08-31 19:38 ` Rob Herring
2021-08-25 15:24 ` [PATCH 06/40] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible Miquel Raynal
2021-08-30 12:34 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 07/40] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible Miquel Raynal
2021-08-30 12:35 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 08/40] mfd: ti_am335x_tscadc: Replace license text with SPDX tag Miquel Raynal
2021-08-30 12:38 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 09/40] mfd: ti_am335x_tscadc: Fix style Miquel Raynal
2021-08-30 12:49 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 10/40] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables Miquel Raynal
2021-08-30 12:52 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 11/40] mfd: ti_am335x_tscadc: Get rid of useless gotos Miquel Raynal
2021-08-30 13:39 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 12/40] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier Miquel Raynal
2021-08-30 14:25 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 13/40] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers Miquel Raynal
2021-08-30 13:43 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 14/40] mfd: ti_am335x_tscadc: Don't search the tree for our clock Miquel Raynal
2021-08-25 15:24 ` [PATCH 15/40] mfd: ti_am335x_tscadc: Simplify divisor calculation Miquel Raynal
2021-08-30 13:47 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 16/40] mfd: ti_am335x_tscadc: Use driver data Miquel Raynal
2021-08-30 14:46 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 17/40] mfd: ti_am335x_tscadc: Mimic the probe from resume() Miquel Raynal
2021-08-25 15:24 ` [PATCH 18/40] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure Miquel Raynal
2021-08-25 15:24 ` [PATCH 19/40] mfd: ti_am335x_tscadc: Always provide an idle configuration Miquel Raynal
2021-08-30 14:49 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 20/40] mfd: ti_am335x_tscadc: Gather the ctrl register logic at one place Miquel Raynal
2021-08-30 13:56 ` Jonathan Cameron
2021-09-02 19:42 ` Miquel Raynal
2021-09-05 11:13 ` Jonathan Cameron
2021-08-25 15:24 ` [PATCH 21/40] mfd: ti_am335x_tscadc: Rename the subsystem enable macro Miquel Raynal
2021-08-30 14:50 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 22/40] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros Miquel Raynal
2021-08-30 14:52 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 23/40] mfd: ti_am335x_tscadc: Rename a variable Miquel Raynal
2021-08-30 14:53 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 24/40] mfd: ti_am335x_tscadc: Fix an error message Miquel Raynal
2021-08-30 13:58 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 25/40] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen Miquel Raynal
2021-08-30 13:59 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 26/40] mfd: ti_am335x_tscadc: Introduce has_tsc Miquel Raynal
2021-08-30 14:02 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 27/40] mfd: ti_am335x_tscadc: Move control register configuration Miquel Raynal
2021-08-30 14:03 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 28/40] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
2021-08-30 14:10 ` Jonathan Cameron
2021-09-02 18:31 ` Miquel Raynal
2021-09-02 20:03 ` Miquel Raynal
2021-09-01 19:26 ` Grygorii Strashko
2021-09-02 6:47 ` Miquel Raynal
2021-09-02 9:57 ` Grygorii Strashko
2021-08-25 15:25 ` [PATCH 29/40] mfd: ti_am335x_tscadc: Support the correctly spelled DT property Miquel Raynal
2021-08-30 14:11 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 30/40] iio: adc: ti_am335x_adc: Replace license text with SPDX tag Miquel Raynal
2021-08-30 14:12 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 31/40] iio: adc: ti_am335x_adc: Fix style Miquel Raynal
2021-08-30 14:16 ` Jonathan Cameron [this message]
2021-08-25 15:25 ` [PATCH 32/40] iio: adc: ti_am335x_adc: Get rid of useless gotos Miquel Raynal
2021-08-30 14:18 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 33/40] iio: adc: ti_am335x_adc: Gather the checks on the delays Miquel Raynal
2021-08-30 14:19 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 34/40] iio: adc: ti_am335x_adc: Add a unit to the timeout delay Miquel Raynal
2021-08-30 14:20 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 35/40] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls Miquel Raynal
2021-08-30 14:22 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 36/40] iio: adc: ti_am335x_adc: Add the scale information Miquel Raynal
2021-08-30 14:23 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 37/40] iio: adc: ti_am335x_adc: Add the am437x compatible Miquel Raynal
2021-08-30 14:24 ` Jonathan Cameron
2021-08-25 15:25 ` [PATCH 38/40] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property Miquel Raynal
2021-08-25 15:25 ` [PATCH 39/40] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module Miquel Raynal
2021-08-25 15:25 ` [PATCH 40/40] ARM: dts: am437x-gp-evm: enable ADC1 Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210830151631.051af320@jic23-huawei \
--to=jic23@kernel.org \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=ryan.barnett@collins.com \
--cc=sboyd@kernel.org \
--cc=t-kristo@ti.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox