From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Tim Harvey <tharvey@gateworks.com>,
Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.13 135/219] arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config
Date: Thu, 9 Sep 2021 07:45:11 -0400 [thread overview]
Message-ID: <20210909114635.143983-135-sashal@kernel.org> (raw)
In-Reply-To: <20210909114635.143983-1-sashal@kernel.org>
From: Tim Harvey <tharvey@gateworks.com>
[ Upstream commit 092cd75e527044050ea76bf774e7d730709b7e8b ]
Fix various MP5416 PMIC configurations:
- Update regulator names per dt-bindings
- ensure values fit among valid register values
- add required regulator-max-microamp property
- add regulator-always-on prop
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../dts/freescale/imx8mm-venice-gw700x.dtsi | 56 ++++++++++++-------
1 file changed, 37 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index c769fadbd008..11dda79cc46b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -283,65 +283,83 @@ pmic@69 {
reg = <0x69>;
regulators {
+ /* vdd_0p95: DRAM/GPU/VPU */
buck1 {
- regulator-name = "vdd_0p95";
- regulator-min-microvolt = <805000>;
+ regulator-name = "buck1";
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-max-microamp = <2500000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_soc */
buck2 {
- regulator-name = "vdd_soc";
- regulator-min-microvolt = <805000>;
+ regulator-name = "buck2";
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
- regulator-max-microamp = <1000000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_arm */
buck3_reg: buck3 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <805000>;
+ regulator-name = "buck3";
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-max-microamp = <2200000>;
- regulator-boot-on;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
+ regulator-always-on;
};
+ /* vdd_1p8 */
buck4 {
- regulator-name = "vdd_1p8";
+ regulator-name = "buck4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-max-microamp = <500000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* nvcc_snvs_1p8 */
ldo1 {
- regulator-name = "nvcc_snvs_1p8";
+ regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-max-microamp = <300000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_snvs_0p8 */
ldo2 {
- regulator-name = "vdd_snvs_0p8";
+ regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_0p9 */
ldo3 {
- regulator-name = "vdd_0p95";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_1p8 */
ldo4 {
- regulator-name = "vdd_1p8";
+ regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
+ regulator-always-on;
};
};
};
--
2.30.2
next prev parent reply other threads:[~2021-09-09 12:16 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210909114635.143983-1-sashal@kernel.org>
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 021/219] ARM: dts: qcom: apq8064: correct clock names Sasha Levin
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 058/219] arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 079/219] ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 080/219] ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 081/219] ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 084/219] ARM: dts: at91: use the right property for shutdown controller Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 085/219] arm64: tegra: Fix Tegra194 PCIe EP compatible string Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 098/219] arm64: dts: qcom: sdm630: Rewrite memory map Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 099/219] arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 102/219] ARM: dts: imx53-ppd: Fix ACHC entry Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 103/219] arm64: dts: qcom: ipq8074: fix pci node reg property Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 104/219] arm64: dts: qcom: sdm660: use reg value for memory node Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 105/219] arm64: dts: qcom: ipq6018: drop '0x' from unit address Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 106/219] arm64: dts: qcom: sdm630: don't use underscore in node name Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 107/219] arm64: dts: qcom: msm8994: " Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 108/219] arm64: dts: qcom: msm8996: " Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 109/219] arm64: dts: qcom: sm8250: Fix epss_l3 unit address Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 132/219] ARM: tegra: acer-a500: Remove bogus USB VBUS regulators Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 133/219] ARM: tegra: tamonten: Fix UART pad setting Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 134/219] arm64: tegra: Fix compatible string for Tegra132 CPUs Sasha Levin
2021-09-09 11:45 ` Sasha Levin [this message]
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 136/219] arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 137/219] arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 138/219] arm64: dts: ls1046a: fix eeprom entries Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 180/219] of: Don't allow __of_attached_node_sysfs() without CONFIG_SYSFS Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210909114635.143983-135-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).