[PATCH AUTOSEL 5.10 014/176] ARM: dts: qcom: apq8064: correct clock names

[PATCH AUTOSEL 5.10 014/176] ARM: dts: qcom: apq8064: correct clock names

[Sasha Levin]

From: David Heidelberg <david@ixit.cz>

[ Upstream commit 0dc6c59892ead17a9febd11202c9f6794aac1895 ]

Since new code doesn't take old clk names in account, it does fixes
error:

msm_dsi 4700000.mdss_dsi: dev_pm_opp_set_clkname: Couldn't find clock: -2

and following kernel oops introduced by
b0530eb1191 ("drm/msm/dpu: Use OPP API to set clk/perf state").

Also removes warning about deprecated clock names.

Tested against linux-5.10.y LTS on Nexus 7 2013.

Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210707131453.24041-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 2687c4e890ba..e36d590e8373 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1262,9 +1262,9 @@ dsi0: mdss_dsi@4700000 {
 				<&mmcc DSI1_BYTE_CLK>,
 				<&mmcc DSI_PIXEL_CLK>,
 				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
-					"src_clk", "byte_clk", "pixel_clk",
-					"core_clk";
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
 
 			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
 					<&mmcc DSI1_ESC_SRC>,
-- 
2.30.2

[PATCH AUTOSEL 5.10 045/176] arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 7ab1f6539762946de06ca14d7401ae123821bc40 ]

Regulator node names don't reflect class of the device. Fix that by
prefixing names with "regulator-".

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722161220.51181-2-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index be81330db14f..02641191682e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -32,14 +32,14 @@ hdmi_con_in: endpoint {
 		};
 	};
 
-	reg_vcc3v3: vcc3v3 {
+	reg_vcc3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	reg_vdd_cpu_gpu: vdd-cpu-gpu {
+	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cpu-gpu";
 		regulator-min-microvolt = <1135000>;
-- 
2.30.2

[PATCH AUTOSEL 5.10 064/176] ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit a79e78c391dc074742c855dc0108a88f781d56a3 ]

Fix the following dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:frame-master: True is not of type 'array'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:bitclock-master: True is not of type 'array'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 633079245601..fd0cd10cb093 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -172,15 +172,15 @@ sgtl5000_port: port {
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_tx_endpoint>;
+				bitclock-master = <&sgtl5000_tx_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_rx_endpoint>;
+				bitclock-master = <&sgtl5000_rx_endpoint>;
 			};
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 065/176] ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 8aec45d7884f16cc21d668693c5b88bff8df0f02 ]

Fix the following dtbs_check warning:
cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array'
cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 93398cfae97e..47df8ac67cf1 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -212,15 +212,15 @@ cs42l51_port: port {
 			cs42l51_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_tx_endpoint>;
+				bitclock-master = <&cs42l51_tx_endpoint>;
 			};
 
 			cs42l51_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_rx_endpoint>;
+				bitclock-master = <&cs42l51_rx_endpoint>;
 			};
 		};
 	};
-- 
2.30.2

[PATCH AUTOSEL 5.10 066/176] ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 1e6bc5987a5252948e3411e5a2dbb434fd1ea107 ]

Swap reg and reg-names order and drop adi,input-justification
and adi,input-style to fix the following dtbs_check warnings:
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-justification: False schema does not allow ['evenly']
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-style: False schema does not allow [[1]]
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:1: 'edid' was expected
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:2: 'cec' was expected

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index ec02cee1dd9b..944d38b85eef 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -185,8 +185,8 @@ &i2c2 {	/* X6 I2C2 */
 &i2c4 {
 	hdmi-transmitter@3d {
 		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
@@ -204,8 +204,6 @@ hdmi-transmitter@3d {
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
-- 
2.30.2

[PATCH AUTOSEL 5.10 068/176] ARM: dts: at91: use the right property for shutdown controller

[Sasha Levin]

From: Nicolas Ferre <nicolas.ferre@microchip.com>

[ Upstream commit 818c4593434e81c9971b8fc278215121622c755e ]

The wrong property "atmel,shdwc-debouncer" was used to specify the
debounce delay for the shutdown controler. Replace it with the
documented and implemented property "debounce-delay-us", as mentioned
in v4 driver submission. See:
https://lore.kernel.org/r/1458134390-23847-3-git-send-email-nicolas.ferre@atmel.com/

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reported-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20210730172729.28093-1-nicolas.ferre@microchip.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91-kizbox3_common.dtsi    | 2 +-
 arch/arm/boot/dts/at91-sam9x60ek.dts          | 2 +-
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts   | 2 +-
 arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 2 +-
 arch/arm/boot/dts/at91-sama5d2_icp.dts        | 2 +-
 arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts     | 2 +-
 arch/arm/boot/dts/at91-sama5d2_xplained.dts   | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 7c3076e245ef..dc77d8e80e56 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -336,7 +336,7 @@ &pwm0 {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index edca66c232c1..a071e53cb854 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -648,7 +648,7 @@ &rtt {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index d3cd2443ba25..9a18453d7842 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -138,7 +138,7 @@ i2c3: i2c@600 {
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 4883b84b4ede..20bcb7480d2e 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -205,7 +205,7 @@ &sdmmc0 {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 19bb50f50c1f..308d472bd104 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -693,7 +693,7 @@ &sdmmc0 {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 1c6361ba1aca..317c6ddb5677 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -203,7 +203,7 @@ i2c2: i2c@600 {
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 
 				input@0 {
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index d767968ae217..08c5182ba86b 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -347,7 +347,7 @@ i2c2: i2c@600 {
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
-- 
2.30.2

[PATCH AUTOSEL 5.10 069/176] arm64: tegra: Fix Tegra194 PCIe EP compatible string

[Sasha Levin]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit bf2942a8b7c38e8cc2d5157b4f0323d7f4e5ec71 ]

The initialization sequence performed by the generic platform driver
pcie-designware-plat.c for a DWC based implementation doesn't work for
Tegra194. Tegra194 has a different initialization sequence requirement
which can only be satisfied by the Tegra194 specific platform driver
pcie-tegra194.c. So, remove the generic compatible string "snps,dw-pcie-ep"
from Tegra194's endpoint controller nodes.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6946fb210e48..9b5007e5f790 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1976,7 +1976,7 @@ pcie@141a0000 {
 	};
 
 	pcie_ep@14160000 {
-		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		compatible = "nvidia,tegra194-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
 		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
@@ -2008,7 +2008,7 @@ pcie_ep@14160000 {
 	};
 
 	pcie_ep@14180000 {
-		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		compatible = "nvidia,tegra194-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
@@ -2040,7 +2040,7 @@ pcie_ep@14180000 {
 	};
 
 	pcie_ep@141a0000 {
-		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		compatible = "nvidia,tegra194-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
 		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-- 
2.30.2

[PATCH AUTOSEL 5.10 079/176] arm64: dts: qcom: sdm630: Rewrite memory map

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

[ Upstream commit 26e02c98a9ad63eb21b9be4ac92002f555130d3b ]

The memory map was wrong. Fix it.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 41 ++++++++++++----------------
 1 file changed, 18 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index deb928d303c2..7da420cd21ba 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -343,10 +343,19 @@ wlan_msa_mem: wlan-msa-mem@85700000 {
 		};
 
 		qhee_code: qhee-code@85800000 {
-			reg = <0x0 0x85800000 0x0 0x3700000>;
+			reg = <0x0 0x85800000 0x0 0x600000>;
 			no-map;
 		};
 
+		rmtfs_mem: memory@85e00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
 		smem_region: smem-mem@86000000 {
 			reg = <0 0x86000000 0 0x200000>;
 			no-map;
@@ -357,58 +366,44 @@ tz_mem: memory@86200000 {
 			no-map;
 		};
 
-		modem_fw_mem: modem-fw-region@8ac00000 {
+		mpss_region: mpss@8ac00000 {
 			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
 			no-map;
 		};
 
-		adsp_fw_mem: adsp-fw-region@92a00000 {
+		adsp_region: adsp@92a00000 {
 			reg = <0x0 0x92a00000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_mba_mem: pil-mba-region@94800000 {
+		mba_region: mba@94800000 {
 			reg = <0x0 0x94800000 0x0 0x200000>;
 			no-map;
 		};
 
-		buffer_mem: buffer-region@94a00000 {
+		buffer_mem: tzbuffer@94a00000 {
 			reg = <0x0 0x94a00000 0x0 0x100000>;
 			no-map;
 		};
 
-		venus_fw_mem: venus-fw-region@9f800000 {
+		venus_region: venus@9f800000 {
 			reg = <0x0 0x9f800000 0x0 0x800000>;
 			no-map;
 		};
 
-		secure_region2: secure-region2@f7c00000 {
-			reg = <0x0 0xf7c00000 0x0 0x5c00000>;
-			no-map;
-		};
-
 		adsp_mem: adsp-region@f6000000 {
 			reg = <0x0 0xf6000000 0x0 0x800000>;
 			no-map;
 		};
 
-		qseecom_ta_mem: qseecom-ta-region@fec00000 {
-			reg = <0x0 0xfec00000 0x0 0x1000000>;
-			no-map;
-		};
-
 		qseecom_mem: qseecom-region@f6800000 {
 			reg = <0x0 0xf6800000 0x0 0x1400000>;
 			no-map;
 		};
 
-		secure_display_memory: secure-region@f5c00000 {
-			reg = <0x0 0xf5c00000 0x0 0x5c00000>;
-			no-map;
-		};
-
-		cont_splash_mem: cont-splash-region@9d400000 {
-			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+		zap_shader_region: gpu@fed00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xfed00000 0x0 0xa00000>;
 			no-map;
 		};
 	};
-- 
2.30.2

[PATCH AUTOSEL 5.10 080/176] arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

[ Upstream commit 36a0d47aee6a8cfd3c6cf4274732d8ef994a25b4 ]

Previous pinctrl configuration was wrong. Fix it and clean up how
multi-pin states are described.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-9-konrad.dybcio@somainline.org
[bjorn: Polished the commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 212 ++++++++++++++++++---------
 1 file changed, 139 insertions(+), 73 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 7da420cd21ba..ee7fcf4c158f 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -522,14 +522,18 @@ tcsr_mutex_regs: syscon@1f40000 {
 			reg = <0x01f40000 0x20000>;
 		};
 
-		tlmm: pinctrl@3000000 {
+		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sdm630-pinctrl";
-			reg = <0x03000000 0xc00000>;
+			reg = <0x03100000 0x400000>,
+				  <0x03500000 0x400000>,
+				  <0x03900000 0x400000>;
+			reg-names = "south", "center", "north";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-			#gpio-cells = <0x2>;
+			gpio-ranges = <&tlmm 0 0 114>;
+			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <0x2>;
+			#interrupt-cells = <2>;
 
 			blsp1_uart1_default: blsp1-uart1-default {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
@@ -549,40 +553,48 @@ blsp1_uart2_default: blsp1-uart2-default {
 				bias-disable;
 			};
 
-			blsp2_uart1_tx_active: blsp2-uart1-tx-active {
-				pins = "gpio16";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep {
-				pins = "gpio16";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			blsp2_uart1_default: blsp2-uart1-active {
+				tx-rts {
+					pins = "gpio16", "gpio19";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-disable;
+				};
 
-			blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active {
-				pins = "gpio17", "gpio18";
-				drive-strength = <2>;
-				bias-disable;
-			};
+				rx {
+					/*
+					 * Avoid garbage data while BT module
+					 * is powered off or not driving signal
+					 */
+					pins = "gpio17";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 
-			blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep {
-				pins = "gpio17", "gpio18";
-				drive-strength = <2>;
-				bias-no-pull;
+				cts {
+					/* Match the pull of the BT module */
+					pins = "gpio18";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
-			blsp2_uart1_rfr_active: blsp2-uart1-rfr-active {
-				pins = "gpio19";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			blsp2_uart1_sleep: blsp2-uart1-sleep {
+				tx {
+					pins = "gpio16";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 
-			blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep {
-				pins = "gpio19";
-				drive-strength = <2>;
-				bias-no-pull;
+				rx-cts-rts {
+					pins = "gpio17", "gpio18", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-no-pull;
+				};
 			};
 
 			i2c1_default: i2c1-default {
@@ -681,50 +693,106 @@ i2c8_sleep: i2c8-sleep {
 				bias-pull-up;
 			};
 
-			sdc1_clk_on: sdc1-clk-on {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <16>;
-			};
+			sdc1_state_on: sdc1-on {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
 
-			sdc1_clk_off: sdc1-clk-off {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <2>;
-			};
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
 
-			sdc1_cmd_on: sdc1-cmd-on {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
 
-			sdc1_cmd_off: sdc1-cmd-off {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <2>;
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
 			};
 
-			sdc1_data_on: sdc1-data-on {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <8>;
-			};
+			sdc1_state_off: sdc1-off {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
 
-			sdc1_data_off: sdc1-data-off {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <2>;
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
 			};
 
-			sdc1_rclk_on: sdc1-rclk-on {
-				pins = "sdc1_rclk";
-				bias-pull-down;
+			sdc2_state_on: sdc2-on {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd {
+					pins = "gpio54";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
 			};
 
-			sdc1_rclk_off: sdc1-rclk-off {
-				pins = "sdc1_rclk";
-				bias-pull-down;
+			sdc2_state_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd {
+					pins = "gpio54";
+					bias-disable;
+					drive-strength = <2>;
+				};
 			};
 		};
 
@@ -816,8 +884,8 @@ sdhc_1: sdhci@c0c4000 {
 			clock-names = "core", "iface", "xo";
 
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
 
 			bus-width = <8>;
 			non-removable;
@@ -962,10 +1030,8 @@ blsp2_uart1: serial@c1af000 {
 			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
-				&blsp2_uart1_rfr_active>;
-			pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
-				&blsp2_uart1_rfr_sleep>;
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
 			status = "disabled";
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 082/176] ARM: dts: imx53-ppd: Fix ACHC entry

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit cd7cd5b716d594e27a933c12f026d4f2426d7bf4 ]

PPD has only one ACHC device, which effectively is a Kinetis
microcontroller. It has one SPI interface used for normal
communication. Additionally it's possible to flash the device
firmware using NXP's EzPort protocol by correctly driving a
second chip select pin and the device reset pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx53-ppd.dts | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index f7dcdf96e5c0..6d9a5ede94aa 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@ cko2_11M: sgtl-clock-cko2 {
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -313,16 +319,13 @@ &gpio4 11 GPIO_ACTIVE_LOW
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {
-- 
2.30.2

[PATCH AUTOSEL 5.10 083/176] arm64: dts: qcom: ipq8074: fix pci node reg property

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 52c9887fba71fc8f12d343833fc595c762aac8c7 ]

reg property should be array of values, here it is a single array,
leading to below warning:

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488]] is not of type 'null'
[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:reg:0: [536870912, 3869, 536874784, 168, 524288, 8192, 537919488, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488]] is not of type 'null'
[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488] is too long

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-17-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 829e37ac82f6..776a6b0f61a6 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -567,10 +567,10 @@ frame@b128000 {
 
 		pcie1: pci@10000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x10000000 0xf1d
-				0x10000f20 0xa8
-				0x00088000 0x2000
-				0x10100000 0x1000>;
+			reg =  <0x10000000 0xf1d>,
+			       <0x10000f20 0xa8>,
+			       <0x00088000 0x2000>,
+			       <0x10100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <1>;
@@ -629,10 +629,10 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 
 		pcie0: pci@20000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x20000000 0xf1d
-				0x20000f20 0xa8
-				0x00080000 0x2000
-				0x20100000 0x1000>;
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x00080000 0x2000>,
+			      <0x20100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
-- 
2.30.2

[PATCH AUTOSEL 5.10 084/176] arm64: dts: qcom: sdm660: use reg value for memory node

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit c81210e38966cfa1c784364e4035081c3227cf5b ]

memory node like other node should be node@reg, which is missing in this
case, so fix it up

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]}

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-18-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index e8c37a1693d3..cc08dc4eb56a 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -20,7 +20,7 @@ chosen {
 		stdout-path = "serial0";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};
-- 
2.30.2

[PATCH AUTOSEL 5.10 085/176] arm64: dts: qcom: ipq6018: drop '0x' from unit address

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 1b91b8ef60e9a67141e66af3cca532c00f4605fe ]

Nodes need not contain '0x' for the unit address. Drop it to fix the
below warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory:
'memory@0x60000' does not match any of the regexes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-19-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index cdc1e3d60c58..3ceb36cac512 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -151,7 +151,7 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		rpm_msg_ram: memory@0x60000 {
+		rpm_msg_ram: memory@60000 {
 			reg = <0x0 0x60000 0x0 0x6000>;
 			no-map;
 		};
-- 
2.30.2

[PATCH AUTOSEL 5.10 086/176] arm64: dts: qcom: sdm630: don't use underscore in node name

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 639dfdbecd88ec05bda87b1d5d419afad50af21c ]

We have underscore (_) in node name so fix that up as well.

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-11-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ee7fcf4c158f..f87054575ce7 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -17,14 +17,14 @@ / {
 	chosen { };
 
 	clocks {
-		xo_board: xo_board {
+		xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "xo_board";
 		};
 
-		sleep_clk: sleep_clk {
+		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32764>;
-- 
2.30.2

[PATCH AUTOSEL 5.10 087/176] arm64: dts: qcom: msm8994: don't use underscore in node name

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 8c678beca7ed3fa8a2c6d86f6603bc23400f9ad8 ]

We have underscore (_) in node name leading to warning:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]}
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-9-vkoul@kernel.org
[bjorn: Added clock-output-names to satisfy parent_names]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 6707f898607f..45f9a44326a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -14,16 +14,18 @@ / {
 	chosen { };
 
 	clocks {
-		xo_board: xo_board {
+		xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
 		};
 
-		sleep_clk: sleep_clk {
+		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
 		};
 	};
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 088/176] arm64: dts: qcom: msm8996: don't use underscore in node name

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 84f3efbe5b4654077608bc2fc027177fe4592321 ]

We have underscore (_) in node name leading to warning:

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-10-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index fd6ae5464dea..eef17434d12a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -17,14 +17,14 @@ / {
 	chosen { };
 
 	clocks {
-		xo_board: xo_board {
+		xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "xo_board";
 		};
 
-		sleep_clk: sleep_clk {
+		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32764>;
-- 
2.30.2

[PATCH AUTOSEL 5.10 089/176] arm64: dts: qcom: sm8250: Fix epss_l3 unit address

[Sasha Levin]

From: Georgi Djakov <georgi.djakov@linaro.org>

[ Upstream commit 77b53d65dc1e54321ec841912f06bcb558a079c0 ]

The unit address of the epss_l3 node is incorrect and does not match
the address of its "reg" property. Let's fix it.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210211193637.9737-1-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d4547a192748..ec356fe07ac8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2346,7 +2346,7 @@ apps_bcm_voter: bcm_voter {
 			};
 		};
 
-		epss_l3: interconnect@18591000 {
+		epss_l3: interconnect@18590000 {
 			compatible = "qcom,sm8250-epss-l3";
 			reg = <0 0x18590000 0 0x1000>;
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 108/176] ARM: tegra: acer-a500: Remove bogus USB VBUS regulators

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 70e740ad55e5f93a19493720f4105555fade4a73 ]

The configuration of USB VBUS regulators was borrowed from downstream
kernel, which is incorrect because the corresponding GPIOs are connected
to PROX_EN (A501 3G model) and LED_EN pins in accordance to the board
schematics. USB works fine with both GPIOs being disabled, so remove the
bogus USB VBUS regulators. The USB VBUS of USB3 is supplied from the fixed
5v system regulator and device-mode USB1 doesn't have VBUS switches.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/tegra20-acer-a500-picasso.dts    | 25 +------------------
 1 file changed, 1 insertion(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 5d0f0fbba1d2..5dbfb83c1b06 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -704,7 +704,6 @@ usb-phy@c5000000 {
 		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus1>;
 	};
 
 	usb@c5008000 {
@@ -716,7 +715,7 @@ usb-phy@c5008000 {
 		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus3>;
+		vbus-supply = <&vdd_5v0_sys>;
 	};
 
 	brcm_wifi_pwrseq: wifi-pwrseq {
@@ -967,28 +966,6 @@ vdd_pnl: regulator@3 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_vbus1: regulator@4 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_vbus3: regulator@5 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb3_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-picasso",
 			     "nvidia,tegra-audio-wm8903";
-- 
2.30.2

[PATCH AUTOSEL 5.10 109/176] ARM: tegra: tamonten: Fix UART pad setting

[Sasha Levin]

From: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>

[ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ]

This patch fixes the tristate and pullup configuration for UART 1 to 3
on the Tamonten SOM.

Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20-tamonten.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 95e6bccdb4f6..dd4d506683de 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -185,8 +185,9 @@ conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
 					"cdev1", "cdev2", "dap1", "dtb", "gma",
 					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -211,7 +212,7 @@ conf_crtp {
 			conf_ddc {
 				nvidia,pins = "ddc", "dta", "dtd", "kbca",
 					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
+					"sdc", "uad", "uca";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -221,10 +222,9 @@ conf_hdint {
 					"lvp0", "owc", "sdb";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-- 
2.30.2

[PATCH AUTOSEL 5.10 110/176] arm64: tegra: Fix compatible string for Tegra132 CPUs

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit f865d0292ff3c0ca09414436510eb4c815815509 ]

The documented compatible string for the CPUs found on Tegra132 is
"nvidia,tegra132-denver", rather than the previously used compatible
string "nvidia,denver".

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra132.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index e40281510c0c..b14e9f3bfdbd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -1215,13 +1215,13 @@ cpus {
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "nvidia,denver";
+			compatible = "nvidia,tegra132-denver";
 			reg = <0>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
-			compatible = "nvidia,denver";
+			compatible = "nvidia,tegra132-denver";
 			reg = <1>;
 		};
 	};
-- 
2.30.2

[PATCH AUTOSEL 5.10 111/176] arm64: dts: ls1046a: fix eeprom entries

[Sasha Levin]

From: Raag Jadav <raagjadav@gmail.com>

[ Upstream commit c1a6018d1839c9cb8f807dc863a50102a1a5c412 ]

ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
eeproms respectively. Both are 4Kb (512 bytes) in size,
and compatible with AT24C04[3].
Remove multi-address entries, as both the boards have a single chip each.

[1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
[2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
[3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf

Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +-------
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  | 7 +------
 2 files changed, 2 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index db3d303093f6..6d22efbd645c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -83,15 +83,9 @@ rtc@51 {
 			};
 
 			eeprom@52 {
-				compatible = "atmel,24c512";
+				compatible = "onnn,cat24c04", "atmel,24c04";
 				reg = <0x52>;
 			};
-
-			eeprom@53 {
-				compatible = "atmel,24c512";
-				reg = <0x53>;
-			};
-
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index d53ccc56bb63..07139e35686d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -58,14 +58,9 @@ temp-sensor@4c {
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c512";
+		compatible = "onnn,cat24c05", "atmel,24c04";
 		reg = <0x52>;
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c512";
-		reg = <0x53>;
-	};
 };
 
 &i2c3 {
-- 
2.30.2

[PATCH AUTOSEL 5.10 145/176] of: Don't allow __of_attached_node_sysfs() without CONFIG_SYSFS

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 6211e9cb2f8faf7faae0b6caf844bfe9527cc607 ]

Trying to boot without SYSFS, but with OF_DYNAMIC quickly
results in a crash:

[    0.088460] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
[...]
[    0.103927] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc3 #4179
[    0.105810] Hardware name: linux,dummy-virt (DT)
[    0.107147] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[    0.108876] pc : kernfs_find_and_get_ns+0x3c/0x7c
[    0.110244] lr : kernfs_find_and_get_ns+0x3c/0x7c
[...]
[    0.134087] Call trace:
[    0.134800]  kernfs_find_and_get_ns+0x3c/0x7c
[    0.136054]  safe_name+0x4c/0xd0
[    0.136994]  __of_attach_node_sysfs+0xf8/0x124
[    0.138287]  of_core_init+0x90/0xfc
[    0.139296]  driver_init+0x30/0x4c
[    0.140283]  kernel_init_freeable+0x160/0x1b8
[    0.141543]  kernel_init+0x30/0x140
[    0.142561]  ret_from_fork+0x10/0x18

While not having sysfs isn't a very common option these days,
it is still expected that such configuration would work.

Paper over it by bailing out from __of_attach_node_sysfs() if
CONFIG_SYSFS isn't enabled.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210820144722.169226-1-maz@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/kobj.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c
index a32e60b024b8..6675b5e56960 100644
--- a/drivers/of/kobj.c
+++ b/drivers/of/kobj.c
@@ -119,7 +119,7 @@ int __of_attach_node_sysfs(struct device_node *np)
 	struct property *pp;
 	int rc;
 
-	if (!of_kset)
+	if (!IS_ENABLED(CONFIG_SYSFS) || !of_kset)
 		return 0;
 
 	np->kobj.kset = of_kset;
-- 
2.30.2