devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Adam Ford <aford173@gmail.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Marek Vasut <marex@denx.de>, Tim Harvey <tharvey@gateworks.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de, patchwork-lst@pengutronix.de
Subject: [PATCH v4 14/18] arm64: dts: imx8mm: add GPC node
Date: Fri, 10 Sep 2021 22:26:36 +0200	[thread overview]
Message-ID: <20210910202640.980366-15-l.stach@pengutronix.de> (raw)
In-Reply-To: <20210910202640.980366-1-l.stach@pengutronix.de>

Add the DT node for the GPC, including all the PGC power domains,
some of them are not fully functional yet, as they require interaction
with the blk-ctrls to properly power up/down the peripherals.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 107 ++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index e7648c3b8390..3922f26f8fd4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -7,6 +7,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mm-pinfunc.h"
@@ -609,6 +611,111 @@ src: reset-controller@30390000 {
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mm-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MM_CLK_USB_BUS>;
+						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+					};
+
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
+						power-domains = <&pgc_hsiomix>;
+						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_gpumix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU_AHB>;
+						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
+								  <&clk IMX8MM_CLK_GPU_AHB>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+									 <&clk IMX8MM_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>, <400000000>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
+							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_vpumix: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
+						resets = <&src IMX8MQ_RESET_VPU_RESET>;
+					};
+
+					pgc_vpu_g1: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+					};
+
+					pgc_vpu_g2: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+					};
+
+					pgc_vpu_h1: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+					};
+
+					pgc_dispmix: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
+								  <&clk IMX8MM_CLK_DISP_APB>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+									 <&clk IMX8MM_SYS_PLL1_800M>;
+						assigned-clock-rates = <500000000>, <200000000>;
+					};
+
+					pgc_mipi: power-domain@11 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
+					};
+				};
+			};
 		};
 
 		aips2: bus@30400000 {
-- 
2.30.2


  parent reply	other threads:[~2021-09-10 20:27 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-10 20:26 [PATCH v4 00/18] i.MX8MM GPC improvements and BLK_CTRL driver Lucas Stach
2021-09-10 20:26 ` [PATCH v4 01/18] Revert "soc: imx: gpcv2: move reset assert after requesting domain power up" Lucas Stach
2021-09-10 20:26 ` [PATCH v4 02/18] soc: imx: gpcv2: Turn domain->pgc into bitfield Lucas Stach
2021-09-10 20:26 ` [PATCH v4 03/18] soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain Lucas Stach
2021-09-10 20:26 ` [PATCH v4 04/18] soc: imx: gpcv2: add lockdep annotation Lucas Stach
2021-09-10 20:26 ` [PATCH v4 05/18] soc: imx: gpcv2: add domain option to keep domain clocks enabled Lucas Stach
2021-09-10 20:26 ` [PATCH v4 06/18] soc: imx: gpcv2: keep i.MX8M* bus " Lucas Stach
2021-09-10 20:26 ` [PATCH v4 07/18] soc: imx: gpcv2: support system suspend/resume Lucas Stach
2021-09-10 20:26 ` [PATCH v4 08/18] dt-bindings: soc: add binding for i.MX8MM VPU blk-ctrl Lucas Stach
2021-09-16 20:23   ` Rob Herring
2021-09-10 20:26 ` [PATCH v4 09/18] dt-bindings: power: imx8mm: add defines for VPU blk-ctrl domains Lucas Stach
2021-09-16 20:25   ` Rob Herring
2021-09-10 20:26 ` [PATCH v4 10/18] soc: imx: add i.MX8M blk-ctrl driver Lucas Stach
2021-09-14 15:46   ` Benjamin Gaignard
2021-10-02  1:07     ` Lucas Stach
2021-10-04 14:27       ` Benjamin Gaignard
2021-10-05 10:03         ` Lucas Stach
2021-10-05 12:36           ` Benjamin Gaignard
2021-10-13 12:12             ` Benjamin Gaignard
2021-11-07 21:08   ` Adam Ford
2021-11-08  8:35     ` Lucas Stach
2021-11-08 13:13       ` Adam Ford
2021-09-10 20:26 ` [PATCH v4 11/18] dt-bindings: soc: add binding for i.MX8MM DISP blk-ctrl Lucas Stach
2021-09-16 20:28   ` Rob Herring
2021-09-10 20:26 ` [PATCH v4 12/18] dt-bindings: power: imx8mm: add defines for DISP blk-ctrl domains Lucas Stach
2021-09-16 20:29   ` Rob Herring
2021-09-10 20:26 ` [PATCH v4 13/18] soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl Lucas Stach
2021-09-12 14:40   ` Adam Ford
2021-09-10 20:26 ` Lucas Stach [this message]
2021-10-01 23:07   ` [PATCH v4 14/18] arm64: dts: imx8mm: add GPC node Tim Harvey
2021-10-01 23:20     ` Lucas Stach
2021-10-02  0:06       ` Tim Harvey
2021-10-02  0:15         ` Tim Harvey
2021-10-02  0:25           ` Lucas Stach
2021-10-02  2:43             ` Tim Harvey
2021-10-02 12:51               ` Lucas Stach
2021-10-03 17:17                 ` Tim Harvey
2021-10-03 19:44                   ` Lucas Stach
2021-10-03 21:21                     ` Tim Harvey
2021-10-04  7:44                       ` Lucas Stach
2021-10-04  7:47                       ` Lucas Stach
2021-09-10 20:26 ` [PATCH v4 15/18] arm64: dts: imx8mm: put USB controllers into power-domains Lucas Stach
2021-09-10 20:26 ` [PATCH v4 16/18] arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core Lucas Stach
2021-09-10 20:26 ` [PATCH v4 17/18] arm64: dts: imx8mm: add VPU blk-ctrl Lucas Stach
2021-09-10 20:26 ` [PATCH v4 18/18] arm64: dts: imx8mm: add DISP blk-ctrl Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210910202640.980366-15-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=aford173@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=marex@denx.de \
    --cc=patchwork-lst@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).