From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <treding@nvidia.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter Chen <peter.chen@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Felipe Balbi <balbi@kernel.org>, David Heidelberg <david@ixit.cz>
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH v7 5/7] ARM: tegra: Add new properties to USB PHY device-tree nodes
Date: Sun, 12 Sep 2021 21:17:16 +0300 [thread overview]
Message-ID: <20210912181718.1328-6-digetx@gmail.com> (raw)
In-Reply-To: <20210912181718.1328-1-digetx@gmail.com>
Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/boot/dts/tegra114.dtsi | 4 ++++
arch/arm/boot/dts/tegra124.dtsi | 6 ++++++
arch/arm/boot/dts/tegra20.dtsi | 6 ++++++
arch/arm/boot/dts/tegra30.dtsi | 6 ++++++
4 files changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fb99b3e971c3..b391c7940b8f 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -706,6 +706,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>,
<&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,6 +726,7 @@ phy1: usb-phy@7d000000 {
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc 0>;
status = "disabled";
};
@@ -744,6 +746,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>,
<&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +765,7 @@ phy3: usb-phy@7d008000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc 2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 8b38f123f554..ee28bb2b01ba 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -1094,6 +1094,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d000000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USBD>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,6 +1114,7 @@ phy1: usb-phy@7d000000 {
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc 0>;
status = "disabled";
};
@@ -1132,6 +1134,7 @@ phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d004000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB2>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,6 +1153,7 @@ phy2: usb-phy@7d004000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc 1>;
status = "disabled";
};
@@ -1169,6 +1173,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d008000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB3>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1192,7 @@ phy3: usb-phy@7d008000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc 2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f3080b05b2ba..29342712aa63 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -876,6 +876,7 @@ phy1: usb-phy@c5000000 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5000000 0x4000>,
<0xc5000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USBD>,
<&tegra_car TEGRA20_CLK_PLL_U>,
@@ -894,6 +895,7 @@ phy1: usb-phy@c5000000 {
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc 0>;
status = "disabled";
};
@@ -914,6 +916,7 @@ usb@c5004000 {
phy2: usb-phy@c5004000 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5004000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>,
<&tegra_car TEGRA20_CLK_PLL_U>,
@@ -922,6 +925,7 @@ phy2: usb-phy@c5004000 {
resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
#phy-cells = <0>;
+ nvidia,pmc = <&tegra_pmc 1>;
status = "disabled";
};
@@ -943,6 +947,7 @@ phy3: usb-phy@c5008000 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5008000 0x4000>,
<0xc5000000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USB3>,
<&tegra_car TEGRA20_CLK_PLL_U>,
@@ -959,6 +964,7 @@ phy3: usb-phy@c5008000 {
nvidia,xcvr-setup = <9>;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
+ nvidia,pmc = <&tegra_pmc 2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 6fd349a9a47f..2a90b4e10834 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -1148,6 +1148,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>,
<&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1168,6 +1169,7 @@ phy1: usb-phy@7d000000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc 0>;
status = "disabled";
};
@@ -1189,6 +1191,7 @@ phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d004000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB2>,
<&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1208,6 +1211,7 @@ phy2: usb-phy@7d004000 {
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
+ nvidia,pmc = <&tegra_pmc 1>;
status = "disabled";
};
@@ -1229,6 +1233,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>,
<&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1248,6 +1253,7 @@ phy3: usb-phy@7d008000 {
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
+ nvidia,pmc = <&tegra_pmc 2>;
status = "disabled";
};
--
2.32.0
next prev parent reply other threads:[~2021-09-12 18:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-12 18:17 [PATCH v7 0/7] Add OTG mode support to Tegra USB PHY and Nexus 7 Dmitry Osipenko
2021-09-12 18:17 ` [PATCH v7 1/7] dt-bindings: phy: tegra20-usb-phy: Convert to schema Dmitry Osipenko
2021-10-04 21:07 ` Thierry Reding
2021-10-05 10:47 ` Greg Kroah-Hartman
2021-09-12 18:17 ` [PATCH v7 2/7] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode Dmitry Osipenko
2021-10-04 21:08 ` Thierry Reding
2021-09-12 18:17 ` [PATCH v7 3/7] soc/tegra: pmc: Expose USB regmap to all SoCs Dmitry Osipenko
2021-09-12 18:17 ` [PATCH v7 4/7] usb: phy: tegra: Support OTG mode programming Dmitry Osipenko
2021-09-27 16:36 ` Dmitry Osipenko
2021-10-04 21:05 ` Thierry Reding
2021-10-04 21:13 ` Dmitry Osipenko
2021-10-04 21:22 ` Thierry Reding
2021-10-04 21:24 ` Dmitry Osipenko
2021-09-12 18:17 ` Dmitry Osipenko [this message]
2021-09-12 18:17 ` [PATCH v7 6/7] ARM: tegra: nexus7: Enable USB OTG mode Dmitry Osipenko
2021-09-12 18:17 ` [PATCH v7 7/7] arm64: tegra132: Add new properties to USB PHY device-tree node Dmitry Osipenko
2021-10-04 21:13 ` [PATCH v7 0/7] Add OTG mode support to Tegra USB PHY and Nexus 7 Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210912181718.1328-6-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=balbi@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@kernel.org \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).