devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Olivier Moysan <olivier.moysan@foss.st.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Fabrice Gasnier <fabrice.gasnier@st.com>,
	Jonathan Cameron <jic23@kernel.org>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Olivier Moysan <olivier.moysan@foss.st.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH v3 7/7] iio: adc: stm32-adc: use generic binding for sample-time
Date: Fri, 24 Sep 2021 10:34:10 +0200	[thread overview]
Message-ID: <20210924083410.12332-8-olivier.moysan@foss.st.com> (raw)
In-Reply-To: <20210924083410.12332-1-olivier.moysan@foss.st.com>

Add st,min-sample-time-nsecs to channel generic binding.
Sample time can be defined par channel node. If a channel
is configured as differential, the same sample time applies
for both inputs.
Keep support of legacy st,min-sample-time-nsecs property
for backward compatibility.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
---
 drivers/iio/adc/stm32-adc.c | 70 ++++++++++++++++++++++---------------
 1 file changed, 41 insertions(+), 29 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index d89115809b37..3f1739b0a7b6 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1809,6 +1809,13 @@ static void stm32_adc_smpr_init(struct stm32_adc *adc, int channel, u32 smp_ns)
 	u32 period_ns, shift = smpr->shift, mask = smpr->mask;
 	unsigned int smp, r = smpr->reg;
 
+	/*
+	 * For vrefint channel, ensure that the sampling time cannot
+	 * be lower than the one specified in the datasheet
+	 */
+	if (channel == adc->int_ch[STM32_ADC_INT_CH_VREFINT])
+		smp_ns = max(smp_ns, adc->cfg->ts_vrefint_ns);
+
 	/* Determine sampling time (ADC clock cycles) */
 	period_ns = NSEC_PER_SEC / adc->common->rate;
 	for (smp = 0; smp <= STM32_ADC_MAX_SMP; smp++)
@@ -1885,6 +1892,13 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 		num_channels += ret;
 	}
 
+	/* Optional sample time is provided either for each, or all channels */
+	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
+	if (ret > 1 && ret != num_channels) {
+		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
+		return -EINVAL;
+	}
+
 	return num_channels;
 }
 
@@ -1900,6 +1914,7 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
 	int scan_index = 0, val, ret, i;
 	struct property *prop;
 	const __be32 *cur;
+	u32 smp = 0;
 
 	if (num_diff) {
 		ret = of_property_read_u32_array(node, "st,adc-diff-channels",
@@ -1942,6 +1957,19 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
 		scan_index++;
 	}
 
+	for (i = 0; i < scan_index; i++) {
+		/*
+		 * Using of_property_read_u32_index(), smp value will only be
+		 * modified if valid u32 value can be decoded. This allows to
+		 * get either no value, 1 shared value for all indexes, or one
+		 * value per channel.
+		 */
+		of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
+
+		/* Prepare sampling time settings */
+		stm32_adc_smpr_init(adc, channels[i].channel, smp);
+	}
+
 	return scan_index;
 }
 
@@ -2034,6 +2062,19 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 
 		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
 					vin[1], scan_index, differential);
+
+		ret = of_property_read_u32(child, "st,min-sample-time-nsecs", &val);
+		/* st,min-sample-time-nsecs is optional */
+		if (!ret) {
+			stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
+			if (differential)
+				stm32_adc_smpr_init(adc, vin[1], val);
+		} else if (ret != -EINVAL) {
+			dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs property %d\n",
+				ret);
+			goto err;
+		}
+
 		scan_index++;
 	}
 
@@ -2052,7 +2093,6 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	struct iio_chan_spec *channels;
 	int scan_index = 0, num_channels = 0, ret, i;
-	u32 smp = 0;
 	bool legacy = false;
 
 	for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
@@ -2080,13 +2120,6 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 		return -EINVAL;
 	}
 
-	/* Optional sample time is provided either for each, or all channels */
-	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
-	if (ret > 1 && ret != num_channels) {
-		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
-		return -EINVAL;
-	}
-
 	if (timestamping)
 		num_channels++;
 
@@ -2103,27 +2136,6 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 		return ret;
 	scan_index = ret;
 
-	for (i = 0; i < scan_index; i++) {
-		/*
-		 * Using of_property_read_u32_index(), smp value will only be
-		 * modified if valid u32 value can be decoded. This allows to
-		 * get either no value, 1 shared value for all indexes, or one
-		 * value per channel.
-		 */
-		of_property_read_u32_index(node, "st,min-sample-time-nsecs",
-					   i, &smp);
-
-		/*
-		 * For vrefint channel, ensure that the sampling time cannot
-		 * be lower than the one specified in the datasheet
-		 */
-		if (channels[i].channel == adc->int_ch[STM32_ADC_INT_CH_VREFINT])
-			smp = max(smp, adc->cfg->ts_vrefint_ns);
-
-		/* Prepare sampling time settings */
-		stm32_adc_smpr_init(adc, channels[i].channel, smp);
-	}
-
 	if (timestamping) {
 		struct iio_chan_spec *timestamp = &channels[scan_index];
 
-- 
2.17.1


  parent reply	other threads:[~2021-09-24  8:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-24  8:34 [PATCH v3 0/7] iio: adc: stm32-adc: add internal channels support Olivier Moysan
2021-09-24  8:34 ` [PATCH v3 1/7] dt-bindings: iio: stm32-adc: add generic channel binding Olivier Moysan
2021-10-04 16:57   ` Rob Herring
2021-09-24  8:34 ` [PATCH v3 2/7] dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel Olivier Moysan
2021-09-24  8:34 ` [PATCH v3 3/7] iio: adc: stm32-adc: split channel init into several routines Olivier Moysan
2021-09-24  8:34 ` [PATCH v3 4/7] iio: adc: stm32-adc: add support of generic channels binding Olivier Moysan
2021-09-24  8:34 ` [PATCH v3 5/7] iio: adc: stm32-adc: add support of internal channels Olivier Moysan
2021-09-27 16:36   ` [Linux-stm32] " Fabrice Gasnier
2021-09-24  8:34 ` [PATCH v3 6/7] iio: adc: stm32-adc: add vrefint calibration support Olivier Moysan
2021-09-24  8:34 ` Olivier Moysan [this message]
2021-09-26 12:23 ` [PATCH v3 0/7] iio: adc: stm32-adc: add internal channels support Jonathan Cameron
2021-09-27 16:40 ` Fabrice Gasnier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210924083410.12332-8-olivier.moysan@foss.st.com \
    --to=olivier.moysan@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrice.gasnier@st.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).