From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <treding@nvidia.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
David Heidelberg <david@ixit.cz>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: [PATCH v1 3/3] ARM: tegra: Update Broadcom Bluetooth device-tree nodes
Date: Mon, 27 Sep 2021 02:37:04 +0300 [thread overview]
Message-ID: <20210926233704.10164-4-digetx@gmail.com> (raw)
In-Reply-To: <20210926233704.10164-1-digetx@gmail.com>
The host-wakeup GPIO is now marked as deprecated in the broadcom-bluetooth
device-tree binding, it's replaced with the host-wakeup interrupt. Update
Tegra device-trees to the recent version of the Bluetooth binding.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 5 ++++-
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi | 5 ++++-
arch/arm/boot/dts/tegra30-ouya.dts | 5 ++++-
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 0abfd6215016..2e6340e92fe1 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -393,6 +393,10 @@ uartc: serial@70006200 {
bluetooth {
compatible = "brcm,bcm4329-bt";
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
/* PLLP 216MHz / 16 / 4 */
max-speed = <3375000>;
@@ -403,7 +407,6 @@ bluetooth {
vddio-supply = <&vdd_1v8_sys>;
device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 6433fde6db02..56e566fb922b 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -819,6 +819,10 @@ uartc: serial@70006200 {
bluetooth {
compatible = "brcm,bcm4330-bt";
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
max-speed = <4000000>;
clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -828,7 +832,6 @@ bluetooth {
vddio-supply = <&vdd_1v8>;
device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index 90db5ff72537..4259871b76c9 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -93,6 +93,10 @@ uartc: serial@70006200 {
bluetooth {
compatible = "brcm,bcm4330-bt";
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
max-speed = <4000000>;
clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -103,7 +107,6 @@ bluetooth {
shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
};
};
--
2.32.0
next prev parent reply other threads:[~2021-09-26 23:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-26 23:37 [PATCH v1 0/3] Tegra ARM32 device-tree improvements for 5.16 Dmitry Osipenko
2021-09-26 23:37 ` [PATCH v1 1/3] ARM: tegra: acer-a500: Correct compatible of ak8975 magnetometer Dmitry Osipenko
2021-10-04 20:40 ` Thierry Reding
2021-09-26 23:37 ` [PATCH v1 2/3] ARM: tegra: Name clock and regulator nodes according to DT-schema Dmitry Osipenko
2021-10-04 20:56 ` Thierry Reding
2021-10-24 19:08 ` Dmitry Osipenko
2021-09-26 23:37 ` Dmitry Osipenko [this message]
2021-10-04 20:41 ` [PATCH v1 3/3] ARM: tegra: Update Broadcom Bluetooth device-tree nodes Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210926233704.10164-4-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).