[PATCH 0/2] arm64: dts: sa8155p-adp / sm8150: Enable remoteproc and fastproc capabilities

[PATCH 0/2] arm64: dts: sa8155p-adp / sm8150: Enable remoteproc and fastproc capabilities

[Bhupesh Sharma]

This patchset enables:
- fastrpc nodes for sDSP, cDSP, and aDSP (sm8150). 
- Enable two remoteprocs found on SA8155p ADP
  platform - 'audio and compute'. 

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

Bhupesh Sharma (2):
  arm64: dts: qcom: sm8150: Add fastproc nodes
  arm64: dts: qcom: sa8155p-adp: Enable remoteproc capabilities

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts |  10 ++
 arch/arm64/boot/dts/qcom/sm8150.dtsi     | 119 +++++++++++++++++++++++
 2 files changed, 129 insertions(+)

-- 
2.31.1

[PATCH 1/2] arm64: dts: qcom: sm8150: Add fastproc nodes

[Bhupesh Sharma]

Add fastrpc nodes for sDSP, cDSP, and aDSP.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 119 +++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ef0232c2cf45..4895923097d7 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1746,6 +1746,33 @@ glink-edge {
 				label = "dsps";
 				qcom,remote-pid = <3>;
 				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x05a1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x05a2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x05a3 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
 			};
 		};
 
@@ -2961,6 +2988,72 @@ glink-edge {
 				label = "cdsp";
 				qcom,remote-pid = <5>;
 				mboxes = <&apss_shared 4>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1401 0x2040>,
+							 <&apps_smmu 0x1421 0x0>,
+							 <&apps_smmu 0x2001 0x420>,
+							 <&apps_smmu 0x2041 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2 0x3440>,
+							 <&apps_smmu 0x22 0x3400>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x3 0x3440>,
+							 <&apps_smmu 0x1423 0x0>,
+							 <&apps_smmu 0x2023 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x4 0x3440>,
+							 <&apps_smmu 0x24 0x3400>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x5 0x3440>,
+							 <&apps_smmu 0x25 0x3400>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x6 0x3460>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x7 0x3460>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x8 0x3460>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
 			};
 		};
 
@@ -3337,6 +3430,32 @@ glink-edge {
 				label = "lpass";
 				qcom,remote-pid = <2>;
 				mboxes = <&apss_shared 8>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1b23 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1b24 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1b25 0x0>;
+					};
+				};
 			};
 		};
 
-- 
2.31.1

[PATCH 2/2] arm64: dts: qcom: sa8155p-adp: Enable remoteproc capabilities

[Bhupesh Sharma]

Enable two remoteprocs found on SA8155p ADP
platform - 'audio and compute'. Also add firmware for them.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 5ae2ddc65f7e..7b703a8e0cd7 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -307,6 +307,16 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sa8155p/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sa8155p/cdsp.mdt";
+};
+
 &uart2 {
 	status = "okay";
 };
-- 
2.31.1