From: Samuel Holland <samuel@sholland.org>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org, linux-sunxi@lists.linux.dev,
linux-kernel@vger.kernel.org,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH 06/10] dt-bindings: arm: sunxi: Expand MBUS binding
Date: Tue, 28 Sep 2021 23:42:50 -0500 [thread overview]
Message-ID: <20210929044254.38301-7-samuel@sholland.org> (raw)
In-Reply-To: <20210929044254.38301-1-samuel@sholland.org>
The MBUS provides more than address translation and bandwidth control.
It also provides a PMU to measure bandwidth usage by certain masters,
and it provides notification via IRQ when they are active or idle.
The MBUS is also tightly integrated with the DRAM controller to provide
a Memory Dynamic Frequency Scaling (MDFS) feature. In view of this, the
MBUS binding needs to represent the hardware resources needed for MDFS,
which include the clocks and MMIO range of the adjacent DRAM controller.
Add the additional resources for the H3 and A64 compatibles, and a new
example showing how they are used.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 75 ++++++++++++++++++-
1 file changed, 72 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index e713a6fe4cf7..c1fb404d2fb3 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -33,10 +33,33 @@ properties:
- allwinner,sun50i-a64-mbus
reg:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: MBUS interconnect/bandwidth/PMU registers
+ - description: DRAM controller/PHY registers
+
+ reg-names:
+ items:
+ - const: "mbus"
+ - const: "dram"
clocks:
+ minItems: 1
+ items:
+ - description: MBUS interconnect module clock
+ - description: DRAM controller/PHY module clock
+ - description: Register bus clock, shared by MBUS and DRAM
+
+ clock-names:
+ items:
+ - const: "mbus"
+ - const: "dram"
+ - const: "bus"
+
+ interrupts:
maxItems: 1
+ description:
+ MBUS PMU activity interrupt.
dma-ranges:
description:
@@ -53,13 +76,42 @@ required:
- clocks
- dma-ranges
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-h3-mbus
+ - allwinner,sun50i-a64-mbus
+
+then:
+ properties:
+ reg:
+ minItems: 2
+
+ clocks:
+ minItems: 3
+
+ required:
+ - reg-names
+ - clock-names
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
additionalProperties: false
examples:
- |
- #include <dt-bindings/clock/sun5i-ccu.h>
+ #include <dt-bindings/clock/sun50i-a64-ccu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
- mbus: dram-controller@1c01000 {
+ dram-controller@1c01000 {
compatible = "allwinner,sun5i-a13-mbus";
reg = <0x01c01000 0x1000>;
clocks = <&ccu CLK_MBUS>;
@@ -69,4 +121,21 @@ examples:
#interconnect-cells = <1>;
};
+ - |
+ dram-controller@1c62000 {
+ compatible = "allwinner,sun50i-a64-mbus";
+ reg = <0x01c62000 0x1000>,
+ <0x01c63000 0x1000>;
+ reg-names = "mbus", "dram";
+ clocks = <&ccu CLK_MBUS>,
+ <&ccu CLK_DRAM>,
+ <&ccu CLK_BUS_DRAM>;
+ clock-names = "mbus", "dram", "bus";
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+ #interconnect-cells = <1>;
+ };
+
...
--
2.31.1
next prev parent reply other threads:[~2021-09-29 4:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-29 4:42 [PATCH 00/10] DRAM devfreq support for Allwinner A64/H5 Samuel Holland
2021-09-29 4:42 ` [PATCH 01/10] PM / devfreq: strengthen check for freq_table Samuel Holland
2021-09-30 3:58 ` Chanwoo Choi
2021-09-29 4:42 ` [PATCH 02/10] PM / devfreq: Do not require devices to have OPPs Samuel Holland
2021-09-30 4:19 ` Chanwoo Choi
2021-09-30 11:37 ` Samuel Holland
2021-10-01 1:59 ` Chanwoo Choi
2021-10-01 1:45 ` Samuel Holland
2021-10-01 2:14 ` Chanwoo Choi
2021-09-29 4:42 ` [PATCH 03/10] PM / devfreq: Drop code for descending freq_table Samuel Holland
2021-09-29 4:42 ` [PATCH 04/10] PM / devfreq: Add a recommended frequency helper Samuel Holland
2021-09-29 4:42 ` [PATCH 05/10] dt-bindings: clock: sunxi: Export CLK_DRAM for devfreq Samuel Holland
2021-09-29 4:42 ` Samuel Holland [this message]
2021-09-29 13:46 ` [PATCH 06/10] dt-bindings: arm: sunxi: Expand MBUS binding Rob Herring
2021-09-29 4:42 ` [PATCH 07/10] dt-bindings: arm: sunxi: Add H5 MBUS compatible Samuel Holland
2021-09-29 4:42 ` [PATCH 08/10] ARM: dts: sunxi: h3/h5: Update MBUS node Samuel Holland
2021-09-29 4:42 ` [PATCH 09/10] arm64: dts: allwinner: a64: " Samuel Holland
2021-09-29 4:42 ` [PATCH 10/10] PM / devfreq: Add a driver for the sun8i/sun50i MBUS Samuel Holland
2021-09-30 4:35 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210929044254.38301-7-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).