Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor

[Jonathan Cameron <jic23@kernel.org>]

On Fri,  8 Oct 2021 12:17:02 +0200
Roan van Dijk <roan@protonic.nl> wrote:

> This series adds support for the Sensirion SCD4x sensor.
> 
> The driver supports continuous reads of temperature, relative humdity and CO2
> concentration. There is an interval of 5 seconds between readings. During
> this interval the drivers checks if the sensor has new data available.
> 
> The driver is based on the scd30 driver. However, The scd4x has become too
> different to just expand the scd30 driver. I made a new driver instead of
> expanding the scd30 driver. I hope I made the right choice by doing so?

Applied to the togreg branch of iio.git with the issues Randy mentioned tidied
up. Pushed out as testing for 0-day to see if it can find anything we missed

Thanks,

Jonathan

> 
> Changes since v5:
> scd4x.c:
>   - Fix bug in trigger_handler
> 
> Changes since v4:
> scd4x.c:
>   - Minor fixes in documentation
>   - Reorder trigger_handler so memcpy is not needed anymore
> Documentation:
>   - Change information about the KernelVersion for the 
>     calibration_forced_value_available
> 
> Changes since v3:
> scd4x.c
>   - Change read and write_and_fetch function parameter. CRC byte is now
>     hidden inside the function.
>   - Fix minor style issues
>   - Add calibration_forced_value_available attribute to the driver
>   - Remove including BUFFER_TRIGGERED
>   - Change calibbias to raw ADC readings rather than converting it to
>     milli degrees C.
> Documentation:
>   - Change description of driver attributes
>   - Add calibration_forced_value_available documentation
> 
> Changes since v2:
> scd4x.c:
>   - Change boolean operations
>   - Document scope of lock
>   - Remove device *dev from struct
>   - Add goto block for errror handling
>   - Add function to read value per channel in read_raw
>   - Fix bug with lock in error paths
>   - Remove conversion of humidity and temperature values
>   - Add scale and offset to temperature channel
>   - Add scale to humidity channel
>   - Move memset out of locked section
>   - Remove unused irq functions
>   - Move device register at end of probe function
> Documentation:
>   - Copy content of sysfs-bus-iio-scd30 to sysfs-bus-iio
>   - Remove Documentation/ABI/testing/sysfs-bus-iio-scd30
> 
> Changes since v1:
> dt-bindings:
>   - Separated compatible string for each sensor type
> scd4x.c:
>   - Changed probe, resume and suspend functions to static
>   - Added SIMPLE_DEV_PM_OPS function call for power management
>     operations.
> 
> Roan van Dijk (4):
>   dt-bindings: iio: chemical: sensirion,scd4x: Add yaml description
>   MAINTAINERS: Add myself as maintainer of the scd4x driver
>   drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
>   iio: documentation: Document scd4x calibration use
> 
>  Documentation/ABI/testing/sysfs-bus-iio       |  41 ++
>  Documentation/ABI/testing/sysfs-bus-iio-scd30 |  34 -
>  .../iio/chemical/sensirion,scd4x.yaml         |  46 ++
>  MAINTAINERS                                   |   6 +
>  drivers/iio/chemical/Kconfig                  |  13 +
>  drivers/iio/chemical/Makefile                 |   1 +
>  drivers/iio/chemical/scd4x.c                  | 689 ++++++++++++++++++
>  7 files changed, 796 insertions(+), 34 deletions(-)
>  delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-scd30
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
>  create mode 100644 drivers/iio/chemical/scd4x.c
>