From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Russell King <linux@armlinux.org.uk>,
John Crispin <john@phrozen.org>,
Ansuel Smith <ansuelsmth@gmail.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: [net-next PATCH v7 14/16] net: dsa: qca8k: move port config to dedicated struct
Date: Thu, 14 Oct 2021 00:39:19 +0200 [thread overview]
Message-ID: <20211013223921.4380-15-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20211013223921.4380-1-ansuelsmth@gmail.com>
Move ports related config to dedicated struct to keep things organized.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/qca8k.c | 26 +++++++++++++-------------
drivers/net/dsa/qca8k.h | 10 +++++++---
2 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 91f2ab3af251..2b0aadb0114c 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1019,7 +1019,7 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
delay = 3;
}
- priv->rgmii_tx_delay[cpu_port_index] = delay;
+ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
delay = 0;
@@ -1035,7 +1035,7 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
delay = 3;
}
- priv->rgmii_rx_delay[cpu_port_index] = delay;
+ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
/* Skip sgmii parsing for rgmii* mode */
if (mode == PHY_INTERFACE_MODE_RGMII ||
@@ -1045,17 +1045,17 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
break;
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
- priv->sgmii_tx_clk_falling_edge = true;
+ priv->ports_config.sgmii_tx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
- priv->sgmii_rx_clk_falling_edge = true;
+ priv->ports_config.sgmii_rx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
- priv->sgmii_enable_pll = true;
+ priv->ports_config.sgmii_enable_pll = true;
if (priv->switch_id == QCA8K_ID_QCA8327) {
dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
- priv->sgmii_enable_pll = false;
+ priv->ports_config.sgmii_enable_pll = false;
}
if (priv->switch_revision < 2)
@@ -1281,15 +1281,15 @@ qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_inde
* not enabled. With ID or TX/RXID delay is enabled and set
* to the default and recommended value.
*/
- if (priv->rgmii_tx_delay[cpu_port_index]) {
- delay = priv->rgmii_tx_delay[cpu_port_index];
+ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
}
- if (priv->rgmii_rx_delay[cpu_port_index]) {
- delay = priv->rgmii_rx_delay[cpu_port_index];
+ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
@@ -1397,7 +1397,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
val |= QCA8K_SGMII_EN_SD;
- if (priv->sgmii_enable_pll)
+ if (priv->ports_config.sgmii_enable_pll)
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
QCA8K_SGMII_EN_TX;
@@ -1425,10 +1425,10 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
val = 0;
/* SGMII Clock phase configuration */
- if (priv->sgmii_rx_clk_falling_edge)
+ if (priv->ports_config.sgmii_rx_clk_falling_edge)
val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
- if (priv->sgmii_tx_clk_falling_edge)
+ if (priv->ports_config.sgmii_tx_clk_falling_edge)
val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
if (val)
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index c5ca6277b45b..e10571a398c9 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -270,15 +270,19 @@ enum {
QCA8K_CPU_PORT6,
};
-struct qca8k_priv {
- u8 switch_id;
- u8 switch_revision;
+struct qca8k_ports_config {
bool sgmii_rx_clk_falling_edge;
bool sgmii_tx_clk_falling_edge;
bool sgmii_enable_pll;
u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+};
+
+struct qca8k_priv {
+ u8 switch_id;
+ u8 switch_revision;
bool legacy_phy_port_mapping;
+ struct qca8k_ports_config ports_config;
struct regmap *regmap;
struct mii_bus *bus;
struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
--
2.32.0
next prev parent reply other threads:[~2021-10-13 22:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-13 22:39 [net-next PATCH v7 00/16] Multiple improvement for qca8337 switch Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 01/16] dsa: qca8k: add mac_power_sel support Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 02/16] dt-bindings: net: dsa: qca8k: Add SGMII clock phase properties Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 03/16] net: dsa: qca8k: add support for sgmii falling edge Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 04/16] dt-bindings: net: dsa: qca8k: Document support for CPU port 6 Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 05/16] net: dsa: qca8k: add support for cpu " Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 06/16] net: dsa: qca8k: rework rgmii delay logic and scan " Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 07/16] dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 08/16] net: dsa: qca8k: add explicit SGMII PLL enable Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 09/16] dt-bindings: net: dsa: qca8k: Document qca,led-open-drain binding Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 10/16] net: dsa: qca8k: add support for pws config reg Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 11/16] dt-bindings: net: dsa: qca8k: document support for qca8328 Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 12/16] net: dsa: qca8k: add support for QCA8328 Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 13/16] net: dsa: qca8k: set internal delay also for sgmii Ansuel Smith
2021-10-13 22:39 ` Ansuel Smith [this message]
2021-10-13 22:39 ` [net-next PATCH v7 15/16] dt-bindings: net: ipq8064-mdio: fix warning with new qca8k switch Ansuel Smith
2021-10-13 22:39 ` [net-next PATCH v7 16/16] dt-bindings: net: dsa: qca8k: convert to YAML schema Ansuel Smith
2021-10-18 14:15 ` Rob Herring
2021-10-18 14:20 ` Ansuel Smith
2021-10-19 16:15 ` Rob Herring
2021-10-15 10:30 ` [net-next PATCH v7 00/16] Multiple improvement for qca8337 switch patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211013223921.4380-15-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=andrew@lunn.ch \
--cc=bjorn.andersson@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).