Re: [PATCH v5 6/7] phy: phy-mtk-dp: Add driver for DP phy

Vinod Koul
2021-10-25T07:20:17Z

On 22-10-21, 15:06, Markus Schneider-Pargmann wrote:

> > > + dp_phy->regs = *(struct regmap **)dev->platform_data;
> > > + if (!dp_phy->regs) {
> > > + dev_err(dev, "No data passed, requires struct regmap**\n");
> > > + return -EINVAL;
> > > + }
> >
> > is there a reason to do it this way? Why not set the IORESOURCE_MEM for
> > this device and let the driver map here?
> >
> > NO clocks?
>
> As briefly mentioned in the commit message, this phy is not a dedicated
> phy. It is embedded in the DisplayPort controller that is added in patch
> 7 of this series. The registerspace of the DisplayPort controller starts
> at offset 0x0, continues with 0x1000 for PHY related functions and goes
> on with encoder related and other registers at 0x2000, 0x3000 and
> 0x4000.
>
> As this seems to me to be a single function block (also from what I read
> from the datasheet), I designed the binding documentation so that the
> DisplayPort controller starts at 0x0 and spans all registers. Based on
> that I wanted to share the regmap created in the DisplayPort controller
> with this PHY driver that is a direct child of that driver, similar to
> multi function device drivers.
>
> That also means that the PHY does not have any clocks it requires as it
> only exists in the context of the DisplayPort controller. I could pass
> the same clocks to the PHY, but the use of these clocks does not make
> any difference.

Okay, that sounds sensible

> As I don't have a piece of devicetree, I struggled with using phy_get
> as, if I understand it correctly, it uses the devicetree to find the
> correct PHY device?

Not really, device tree is one of the backends phy_get() relies on. If
you are having issues, then chances are there are bugs somewhere or
usage is incorrect

> Do you have a suggestion on how I could improve this interaction between
> DP controller and PHY? Maybe some driver that I could look at that has
> similar constraints?

I would say use phy_get() and fix if we have any issues around it, that
should make it much cleaner to use

--
~Vinod