From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 124E4C433FE for ; Tue, 26 Oct 2021 11:17:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id ED44960F39 for ; Tue, 26 Oct 2021 11:17:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235128AbhJZLTh (ORCPT ); Tue, 26 Oct 2021 07:19:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39652 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233252AbhJZLTh (ORCPT ); Tue, 26 Oct 2021 07:19:37 -0400 Received: from mail-wm1-x32e.google.com (mail-wm1-x32e.google.com [IPv6:2a00:1450:4864:20::32e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 861B3C061745 for ; Tue, 26 Oct 2021 04:17:13 -0700 (PDT) Received: by mail-wm1-x32e.google.com with SMTP id 131-20020a1c0489000000b0032cca9883b5so1437507wme.0 for ; Tue, 26 Oct 2021 04:17:13 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=0sqozBq+aXNpDnMO1F1fpUtm2LewFLxPBuJo7vey+3c=; b=ssxob8vuEy+tqrym6N7nXn6RXaHH07Gdtl/elasP+IJyqmCnw6LngyV6+6EjasSuM1 hihbNRCikanfRpYqnmegnHLQuwPCO05x3SsiXoXnVmucbB23CW9m/lDi0++ki0UT8R6H e7fagxWxrgoxFbgiWW7vOiVAtcc8bqjqYRMRd7hddmhD6S/JnYXG5fNk2QgI+gx6Y66i e69fceJaNGZkmwoK7Bfp619ElgVLQRtwxz/R3lHyCQ5tpAswxPKdaemKr5Q1IipnLP80 EYMSr4xgR9w+a3oDz1iwqFbhwk7cP6i8i12t+yl3PrIpx1exu1INcBQ3mHUsQapFUT9v ekzg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=0sqozBq+aXNpDnMO1F1fpUtm2LewFLxPBuJo7vey+3c=; b=H5srF35anNyieKdbijn+Jl8MiR9qlSvVf8JUQhvUpxwq7GwP6ke3D0zTBMz4JtZVYn RL09j1YBj/s3SYOoZLcDYa1lNwGc+QXnAnQZ5z1YcOxUTwh03NRPCI7XB8iZToExXcba qA3ebKywzhVMnNjC6zwiKHHjhsHJKZjSRxtHq7z+e6TM0I69g9dNYY1Td/nKkO6vfaUj fGHawgfa602PVzFbtgA63OYtxRiXSgz0RdaI3MOEk5FYR5+IjVeu85fIdaRKOFuAPg2Q Gta4VGuM/vMcz4qnbuWF6q2fvtWgm//GXmfOphcqCjvZovpObtDgAICbBHNDjgYxgKQE g2Eg== X-Gm-Message-State: AOAM533J5LkZ1zW5zzY1H9QPPs0KH+tNPnGJApHNbVcPr8NFonLIA5eT qUuz9HO64NsEMo+kFXKYTzJEvw== X-Google-Smtp-Source: ABdhPJypP9cHC0jRQw6PvChZ+JACYERipY4z2ouZckYpMgUe1hGPTLzKxXM8vIUqjJ8Z5F1PnRiQfQ== X-Received: by 2002:a1c:790e:: with SMTP id l14mr13281470wme.12.1635247032054; Tue, 26 Oct 2021 04:17:12 -0700 (PDT) Received: from srini-hackbox.lan (cpc86377-aztw32-2-0-cust226.18-1.cable.virginm.net. [92.233.226.227]) by smtp.gmail.com with ESMTPSA id l124sm355483wml.8.2021.10.26.04.17.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 26 Oct 2021 04:17:11 -0700 (PDT) From: Srinivas Kandagatla To: broonie@kernel.org, bjorn.andersson@linaro.org, robh@kernel.org Cc: plai@codeaurora.org, pierre-louis.bossart@linux.intel.com, tiwai@suse.de, devicetree@vger.kernel.org, perex@perex.cz, alsa-devel@alsa-project.org, lgirdwood@gmail.com, bgoswami@codeaurora.org, Srinivas Kandagatla Subject: [PATCH v11 01/17] ASoC: dt-bindings: move LPASS dai related bindings out of q6afe Date: Tue, 26 Oct 2021 12:16:39 +0100 Message-Id: <20211026111655.1702-2-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.21.0 In-Reply-To: <20211026111655.1702-1-srinivas.kandagatla@linaro.org> References: <20211026111655.1702-1-srinivas.kandagatla@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org q6afe (Audio Front End) is one of the DSP service that handles both LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks. As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP. In order to allow multiple DSP frameworks to use these bindings its best to move it out from the dsp specific bindings. For compatibility reasons and not breaking which is already working we still maintain same compatible string "qcom,q6afe-dais" Also as part of this change convert these LPASS dai related bindings into yaml format. Signed-off-by: Srinivas Kandagatla Reviewed-by: Rob Herring --- .../devicetree/bindings/sound/qcom,q6afe.txt | 158 ---------------- .../sound/qcom,q6dsp-lpass-ports.yaml | 178 ++++++++++++++++++ 2 files changed, 178 insertions(+), 158 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index 1677448347da..fcf81058504c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -12,92 +12,6 @@ used by all apr services. Must contain the following properties. from DSP. example "qcom,q6afe" -= AFE DAIs (Digital Audio Interface) -"dais" subnode of the AFE node. It represents afe dais, each afe dai is a -subnode of "dais" representing board specific dai setup. -"dais" node should have following properties followed by dai children. - -- compatible: - Usage: required - Value type: - Definition: must be "qcom,q6afe-dais" - -- #sound-dai-cells - Usage: required - Value type: - Definition: Must be 1 - -- #address-cells - Usage: required - Value type: - Definition: Must be 1 - -- #size-cells - Usage: required - Value type: - Definition: Must be 0 - -== AFE DAI is subnode of "dais" and represent a dai, it includes board specific -configuration of each dai. Must contain the following properties. - -- reg - Usage: required - Value type: - Definition: Must be dai id - -- qcom,sd-lines - Usage: required for mi2s interface - Value type: - Definition: Must be list of serial data lines used by this dai. - should be one or more of the 0-3 sd lines. - - - qcom,tdm-sync-mode: - Usage: required for tdm interface - Value type: - Definition: Synchronization mode. - 0 - Short sync bit mode - 1 - Long sync mode - 2 - Short sync slot mode - - - qcom,tdm-sync-src: - Usage: required for tdm interface - Value type: - Definition: Synchronization source. - 0 - External source - 1 - Internal source - - - qcom,tdm-data-out: - Usage: required for tdm interface - Value type: - Definition: Data out signal to drive with other masters. - 0 - Disable - 1 - Enable - - - qcom,tdm-invert-sync: - Usage: required for tdm interface - Value type: - Definition: Invert the sync. - 0 - Normal - 1 - Invert - - - qcom,tdm-data-delay: - Usage: required for tdm interface - Value type: - Definition: Number of bit clock to delay data - with respect to sync edge. - 0 - 0 bit clock cycle - 1 - 1 bit clock cycle - 2 - 2 bit clock cycle - - - qcom,tdm-data-align: - Usage: required for tdm interface - Value type: - Definition: Indicate how data is packed - within the slot. For example, 32 slot width in case of - sample bit width is 24. - 0 - MSB - 1 - LSB - = AFE CLOCKSS "clocks" subnode of the AFE node. It represents q6afe clocks "clocks" node should have following properties. @@ -122,78 +36,6 @@ apr-service@4 { compatible = "qcom,q6afe"; reg = ; - dais { - compatible = "qcom,q6afe-dais"; - #sound-dai-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dai@1 { - reg = ; - }; - - dai@24 { - reg = ; - qcom,tdm-sync-mode = <1>: - qcom,tdm-sync-src = <1>; - qcom,tdm-data-out = <0>; - qcom,tdm-invert-sync = <1>; - qcom,tdm-data-delay = <1>; - qcom,tdm-data-align = <0>; - - }; - - dai@25 { - reg = ; - qcom,tdm-sync-mode = <1>: - qcom,tdm-sync-src = <1>; - qcom,tdm-data-out = <0>; - qcom,tdm-invert-sync = <1>; - qcom,tdm-data-delay <1>: - qcom,tdm-data-align = <0>; - }; - - dai@16 { - reg = ; - qcom,sd-lines = <0 2>; - }; - - dai@17 { - reg = ; - qcom,sd-lines = <1>; - }; - - dai@18 { - reg = ; - qcom,sd-lines = <0 3>; - }; - - dai@19 { - reg = ; - qcom,sd-lines = <1>; - }; - - dai@20 { - reg = ; - qcom,sd-lines = <1 3>; - }; - - dai@21 { - reg = ; - qcom,sd-lines = <0>; - }; - - dai@22 { - reg = ; - qcom,sd-lines = <0>; - }; - - dai@23 { - reg = ; - qcom,sd-lines = <1>; - }; - }; - clocks { compatible = "qcom,q6afe-clocks"; #clock-cells = <2>; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml new file mode 100644 index 000000000000..e6148c17419b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding + +maintainers: + - Srinivas Kandagatla + +description: | + This binding describes the Qualcomm DSP LPASS Audio ports + +properties: + compatible: + enum: + - qcom,q6afe-dais + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +#Digital Audio Interfaces +patternProperties: + '^dai@[0-9]+$': + type: object + description: + Q6DSP Digital Audio Interfaces. + + properties: + reg: + description: + Digital Audio Interface ID + + qcom,sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + List of serial data lines used by this dai.should be one or more of the 0-3 sd lines. + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + minimum: 0 + maximum: 3 + + qcom,tdm-sync-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + TDM Synchronization mode + 0 = Short sync bit mode + 1 = Long sync mode + 2 = Short sync slot mode + + qcom,tdm-sync-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Synchronization source + 0 = External source + 1 = Internal source + + qcom,tdm-data-out: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Data out signal to drive with other masters + 0 = Disable + 1 = Enable + + qcom,tdm-invert-sync: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Invert the sync + 0 = Normal + 1 = Invert + + qcom,tdm-data-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + TDM Number of bit clock to delay data + 0 = 0 bit clock cycle + 1 = 1 bit clock cycle + 2 = 2 bit clock cycle + + qcom,tdm-data-align: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Indicate how data is packed within the slot. For example, 32 slot + width in case of sample bit width is 24TDM Invert the sync. + 0 = MSB + 1 = LSB + + required: + - reg + + allOf: + - if: + properties: + reg: + contains: + # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7 + items: + minimum: 24 + maximum: 103 + then: + required: + - qcom,tdm-sync-mode + - qcom,tdm-sync-src + - qcom,tdm-data-out + - qcom,tdm-invert-sync + - qcom,tdm-data-delay + - qcom,tdm-data-align + + - if: + properties: + reg: + contains: + # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and + # QUINARY_MI2S_RX - QUINARY_MI2S_TX + items: + oneOf: + - minimum: 16 + maximum: 23 + - minimum: 127 + maximum: 128 + then: + required: + - qcom,sd-lines + + additionalProperties: false + +required: + - compatible + - reg + - "#sound-dai-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + #include + apr { + #address-cells = <1>; + #size-cells = <0>; + apr-service@4 { + reg = ; + #address-cells = <1>; + #size-cells = <0>; + q6afedai@1 { + compatible = "qcom,q6afe-dais"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = ; + qcom,sd-lines = <0 1 2 3>; + }; + }; + }; + }; -- 2.21.0