[PATCH 1/4] dt-bindings: pincfg-node: Add "output-impedance-ohms" property

[Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>]

On RZ/G2L SoC for Group-B pins, output impedance can be configured. This
patch documents "output-impedance-ohms" property in pincfg-node.yaml so
that other platforms requiring such feature can make use of this property.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
RFC->v1
 * Dropped type
 * Renamed output-impedance -> output-impedance-ohms
---
 Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index 71ed0a9def84..4b22a9e3a447 100644
--- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -114,6 +114,9 @@ properties:
     description: enable output on a pin without actively driving it
       (such as enabling an output buffer)
 
+  output-impedance-ohms:
+    description: set the output impedance of a pin to at most X ohms
+
   output-low:
     type: boolean
     description: set the pin to output mode with low level
-- 
2.17.1