From: Meng Li <Meng.Li@windriver.com>
To: shawnguo@kernel.org, leoyang.li@nxp.com, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
meng.li@windriver.com
Subject: [PATCH] arch: arm64: dts: add delay between CS and CLK signal for flash device
Date: Wed, 3 Nov 2021 11:38:38 +0800 [thread overview]
Message-ID: <20211103033838.16015-1-Meng.Li@windriver.com> (raw)
Based on commit d59c90a2400f("spi: spi-fsl-dspi: Convert
TCFQ users to XSPI FIFO mode ") and 6c1c26ecd9a3("spi:
spi-fsl-dspi: Accelerate transfers using larger word size if possible"),
on ls1043a-rdb platform, the spi work mode is changed from TCFQ
mode to XSPI mode. In order to keep the transmission sequence matches
with flash device, it is need to add delay between CS and CLK signal.
The strategy of generating delay value refers to QorIQ LS1043A
Reference Manual.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 3a669238a0b8..3b1a31a063c6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -98,6 +98,8 @@
compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <100>;
};
slic@2 {
--
2.17.1
next reply other threads:[~2021-11-03 3:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 3:38 Meng Li [this message]
2021-11-15 2:19 ` [PATCH] arch: arm64: dts: add delay between CS and CLK signal for flash device Li, Meng
2021-11-21 9:17 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103033838.16015-1-Meng.Li@windriver.com \
--to=meng.li@windriver.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox