devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <jic23@kernel.org>, <robh+dt@kernel.org>,
	<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] dt-bindings:iio:amplifiers: add ad7293 doc
Date: Wed, 3 Nov 2021 20:08:51 +0000	[thread overview]
Message-ID: <20211103200851.00007c67@Huawei.com> (raw)
In-Reply-To: <20211102135947.131223-3-antoniu.miclaus@analog.com>

On Tue, 2 Nov 2021 15:59:47 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add device tree bindings for the AD7293 Power Amplifier.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

Hi Antoniu

Whilst the driver may not support all the features, we should
try to describe as many of the hardware connections / power supplies
etc as possible.

From a quick glance, I'm seeing a reset gpio, some alert pins (which I'm
assuming can be used as interrupts, and several power supplies that should
be provided by regulators.

So for v2, please added as much of that as possible.

There may be odd corner cases (e.g. the sleep pins) where we aren't
completely sure how they would be used, which you can leave for when/if
we figure out what makes sense.

Jonathan

> ---
>  .../bindings/iio/amplifiers/adi,ad7293.yaml   | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
> new file mode 100644
> index 000000000000..b9cfd4621fb7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/amplifiers/adi,ad7293.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
> +       DACs, Temperature and Current Sensors
> +
> +maintainers:
> +  - Antoniu Miclaus <antoniu.miclaus@analog.com>
> +
> +description: |
> +   Power Amplifier drain current controller containing functionality
> +   for general-purpose monitoring and control of current, voltage,
> +   and temperature, integrated into a single chip solution with an
> +   SPI-compatible interface.
> +
> +   https://www.analog.com/en/products/ad7293.html
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7293
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    maximum: 1000000
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      ad7293@0 {
> +        compatible = "adi,ad7293";
> +        reg = <0>;
> +        spi-max-frequency = <1000000>;
> +      };
> +    };
> +...


      reply	other threads:[~2021-11-03 20:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-02 13:59 [PATCH 0/2] Add support for AD7293 Power Amplifier Antoniu Miclaus
2021-11-02 13:59 ` [PATCH 1/2] iio:amplifiers:ad7293: add support for AD7293 Antoniu Miclaus
2021-11-03 20:51   ` Jonathan Cameron
2021-11-02 13:59 ` [PATCH 2/2] dt-bindings:iio:amplifiers: add ad7293 doc Antoniu Miclaus
2021-11-03 20:08   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211103200851.00007c67@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=antoniu.miclaus@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).