From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
gregkh@linuxfoundation.org, bjorn.andersson@linaro.org,
robh+dt@kernel.org, linux-usb@vger.kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Cc: wcheng@codeaurora.org, bryan.odonoghue@linaro.org
Subject: [PATCH v3 2/7] dt-bindings: usb: Add Qualcomm PMIC type C controller YAML schema
Date: Fri, 5 Nov 2021 03:35:53 +0000 [thread overview]
Message-ID: <20211105033558.1573552-3-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20211105033558.1573552-1-bryan.odonoghue@linaro.org>
Add a YAML binding for the type-c silicon interface inside Qualcomm's
pm8150b hardware block.
The type-c driver operates with a pdphy driver inside of a high level
single TCPM device.
Based on original work by Wesley.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../bindings/usb/qcom,pmic-typec.yaml | 91 +++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 0000000000000..bbe07269e92b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm PMIC based USB type C Detection Driver
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ Qualcomm PMIC Type C Detect
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8150b-typec
+
+ reg:
+ maxItems: 1
+ description: Type C base address
+
+ interrupts:
+ items:
+ - description: Bitmask of CC attach, VBUS error, tCCDebounce done and more
+ - description: VCONN Powered Detection
+ - description: CC state change
+ - description: VCONN over-current condition
+ - description: VBUS state change
+ - description: Attach Deteach notification
+ - description: Legacy cable detect
+ - description: Try.Src Try.Snk state change
+
+ interrupt-names:
+ items:
+ - const: or-rid-detect-change
+ - const: vpd-detect
+ - const: cc-state-change
+ - const: vconn-oc
+ - const: vbus-change
+ - const: attach-detach
+ - const: legacy-cable-detect
+ - const: try-snk-src-detect
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/usb/typec/tcpm/qcom,pmic-usb-typec.h>
+ pm8150b {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8150b_typec: typec@1500 {
+ compatible = "qcom,pm8150b-typec";
+ reg = <0x1500>;
+ interrupts = <0x2 0x15 PMIC_TYPEC_OR_RID_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_VPD_IRQ
+ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_CC_STATE_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_VCONN_OC_IRQ
+ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_VBUS_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_ATTACH_DETACH_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_LEGACY_CABLE_IRQ
+ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_TRY_SNK_SRC_IRQ
+ IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "or-rid-detect-change",
+ "vpd-detect",
+ "cc-state-change",
+ "vconn-oc",
+ "vbus-change",
+ "attach-detach",
+ "legacy-cable-detect",
+ "try-snk-src-detect";
+ };
+ };
+...
--
2.33.0
next prev parent reply other threads:[~2021-11-05 3:34 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-05 3:35 [PATCH v3 0/7] Add pm8150b TPCM driver Bryan O'Donoghue
2021-11-05 3:35 ` [PATCH v3 1/7] dt-bindings: usb: Add qcom,pmic-usb-typec dt-binding header Bryan O'Donoghue
2021-11-12 22:28 ` Rob Herring
2021-11-12 23:03 ` Bryan O'Donoghue
2021-11-05 3:35 ` Bryan O'Donoghue [this message]
2021-11-05 3:35 ` [PATCH v3 3/7] dt-bindings: usb: Add qcom,pmic-usb-pdphy " Bryan O'Donoghue
2021-11-05 3:35 ` [PATCH v3 4/7] dt-bindings: usb: Add Qualcomm PMIC PDPHY controller YAML schema Bryan O'Donoghue
2021-11-05 3:35 ` [PATCH v3 5/7] dt-bindings: usb: Add Qualcomm PMIC TCPM " Bryan O'Donoghue
2021-11-05 14:41 ` Rob Herring
2021-11-08 17:13 ` Rob Herring
2021-11-08 19:00 ` Bryan O'Donoghue
2021-11-08 19:22 ` Rob Herring
2021-11-08 19:36 ` Bryan O'Donoghue
2021-11-12 22:25 ` Rob Herring
2021-11-12 23:05 ` Bryan O'Donoghue
2021-11-05 3:35 ` [PATCH v3 6/7] usb: typec: qcom: Remove standalone qcom pm8150b typec driver Bryan O'Donoghue
2021-11-05 14:59 ` Heikki Krogerus
2021-11-05 15:02 ` Heikki Krogerus
2021-11-05 16:05 ` Bryan O'Donoghue
2021-11-05 19:24 ` Guenter Roeck
2021-11-05 3:35 ` [PATCH v3 7/7] usb: typec: qcom: Add a pm8150b TCPM driver Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211105033558.1573552-3-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=wcheng@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).