From: Sam Protsenko <semen.protsenko@linaro.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 08/12] watchdog: s3c2410: Add support for WDT counter enable register
Date: Sun, 7 Nov 2021 22:29:39 +0200 [thread overview]
Message-ID: <20211107202943.8859-9-semen.protsenko@linaro.org> (raw)
In-Reply-To: <20211107202943.8859-1-semen.protsenko@linaro.org>
On new Exynos chips (e.g. Exynos850) new CLUSTERx_NONCPU_OUT register is
introduced, where CNT_EN_WDT bit must be enabled to make watchdog
counter running. Add corresponding quirk and proper infrastructure to
handle that register if the quirk is set.
This commit doesn't bring any functional change to existing devices, but
merely provides an infrastructure for upcoming chips support.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
Changes in v3:
- Added R-b tag by Krzysztof Kozlowski
Changes in v2:
- Used quirks instead of callbacks for all added PMU registers
- Used BIT() macro
- Extracted cleanup code to separate patch to minimize changes and
ease the review and porting
drivers/watchdog/s3c2410_wdt.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 2a61b6ea5602..ec341c876225 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -60,11 +60,13 @@
#define QUIRK_HAS_RST_STAT (1 << 1)
#define QUIRK_HAS_WTCLRINT_REG (1 << 2)
#define QUIRK_HAS_PMU_AUTO_DISABLE (1 << 3)
+#define QUIRK_HAS_PMU_CNT_EN (1 << 4)
/* These quirks require that we have a PMU register map */
#define QUIRKS_HAVE_PMUREG (QUIRK_HAS_PMU_CONFIG | \
QUIRK_HAS_RST_STAT | \
- QUIRK_HAS_PMU_AUTO_DISABLE)
+ QUIRK_HAS_PMU_AUTO_DISABLE | \
+ QUIRK_HAS_PMU_CNT_EN)
static bool nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin;
@@ -98,6 +100,8 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to
* @rst_stat_reg: Offset in pmureg for the register that has the reset status.
* @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
* reset.
+ * @cnt_en_reg: Offset in pmureg for the register that enables WDT counter.
+ * @cnt_en_bit: Bit number for "watchdog counter enable" in cnt_en register.
* @quirks: A bitfield of quirks.
*/
@@ -108,6 +112,8 @@ struct s3c2410_wdt_variant {
int mask_bit;
int rst_stat_reg;
int rst_stat_bit;
+ int cnt_en_reg;
+ int cnt_en_bit;
u32 quirks;
};
@@ -233,6 +239,20 @@ static int s3c2410wdt_mask_wdt_reset(struct s3c2410_wdt *wdt, bool mask)
return ret;
}
+static int s3c2410wdt_enable_counter(struct s3c2410_wdt *wdt, bool en)
+{
+ const u32 mask_val = BIT(wdt->drv_data->cnt_en_bit);
+ const u32 val = en ? mask_val : 0;
+ int ret;
+
+ ret = regmap_update_bits(wdt->pmureg, wdt->drv_data->cnt_en_reg,
+ mask_val, val);
+ if (ret < 0)
+ dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
+
+ return ret;
+}
+
static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
{
int ret;
@@ -249,6 +269,12 @@ static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
return ret;
}
+ if (wdt->drv_data->quirks & QUIRK_HAS_PMU_CNT_EN) {
+ ret = s3c2410wdt_enable_counter(wdt, !mask);
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}
--
2.30.2
next prev parent reply other threads:[~2021-11-07 20:30 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-07 20:29 [PATCH v3 00/12] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-11-07 20:29 ` [PATCH v3 01/12] dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7 Sam Protsenko
2021-11-17 13:33 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 02/12] dt-bindings: watchdog: Document Exynos850 watchdog bindings Sam Protsenko
2021-11-08 13:08 ` Krzysztof Kozlowski
2021-11-12 22:43 ` Rob Herring
2021-11-17 13:34 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 03/12] watchdog: s3c2410: Fail probe if can't find valid timeout Sam Protsenko
2021-11-17 13:34 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 04/12] watchdog: s3c2410: Let kernel kick watchdog Sam Protsenko
2021-11-17 13:34 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 05/12] watchdog: s3c2410: Make reset disable register optional Sam Protsenko
2021-11-17 13:35 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 06/12] watchdog: s3c2410: Extract disable and mask code into separate functions Sam Protsenko
2021-11-17 13:35 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 07/12] watchdog: s3c2410: Implement a way to invert mask reg value Sam Protsenko
2021-11-17 13:35 ` Guenter Roeck
2021-11-07 20:29 ` Sam Protsenko [this message]
2021-11-17 13:36 ` [PATCH v3 08/12] watchdog: s3c2410: Add support for WDT counter enable register Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 09/12] watchdog: s3c2410: Cleanup PMU related code Sam Protsenko
2021-11-17 13:36 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 10/12] watchdog: s3c2410: Support separate source clock Sam Protsenko
2021-11-08 13:24 ` Krzysztof Kozlowski
2021-11-17 13:37 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 11/12] watchdog: s3c2410: Remove superfluous err label Sam Protsenko
2021-11-17 13:37 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 12/12] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-11-08 13:25 ` Krzysztof Kozlowski
2021-11-17 13:37 ` Guenter Roeck
2021-11-20 20:29 ` Guenter Roeck
2021-11-21 16:25 ` Sam Protsenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211107202943.8859-9-semen.protsenko@linaro.org \
--to=semen.protsenko@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).