Re: [PATCH 1/2] dt-bindings: mtd: brcmnand: add "no-wp" property

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hello,

rafal@milecki.pl wrote on Tue, 9 Nov 2021 08:49:36 +0100:

> On 03.11.2021 16:11, Rafał Miłecki wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> > 
> > It's required to properly describe boards without connected WP pin (e.g.
> > Asus GT-AC5300).
> > 
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> > ---
> >   Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml | 5 +++++
> >   1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
> > index dd5a64969e37..49c7860c0dad 100644
> > --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
> > @@ -111,6 +111,11 @@ properties:
> >         earlier versions of this core that include WP
> >       type: boolean  
> >   > +  no-wp:  
> > +    description:
> > +      This property marks boards with WP pin not connected to the NAND chip.
> > +    type: boolean  
> 
> I started rethinking this. Since we already hav "brcm,nand-has-wp"
> (boolean), would makes more sense:
> 1. Add "no-wp" boolean (as proposed in this patch)
> 2. Add "wp" (or similar) with [0, 1] and deprecate "brcm,nand-has-wp"

Maybe this should be a raw NAND wide property, at least in the bindings
for now: nand-wp (such as nand-rb) and this property should contain the
wp line id.

For me, brcm,nand-has-wp means that the nand wp is connected, not that
it "can be" connected. The fact that the controller has a wp pin or not
should be internal to the controller driver (different compatible or hw
version check).

Thanks,
Miquèl