devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Julien Massot <julien.massot@iot.bzh>
To: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org,
	robh+dt@kernel.org, geert+renesas@glider.be
Cc: linux-renesas-soc@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
	Julien Massot <julien.massot@iot.bzh>
Subject: [PATCH v1 1/3] dt-bindings: remoteproc: Add Renesas R-Car
Date: Mon, 15 Nov 2021 14:50:30 +0100	[thread overview]
Message-ID: <20211115135032.129227-2-julien.massot@iot.bzh> (raw)
In-Reply-To: <20211115135032.129227-1-julien.massot@iot.bzh>

Renesas R-Car SoCs may contains a Realtime processor.
This patch adds binding for this remote processor.

Signed-off-by: Julien Massot <julien.massot@iot.bzh>
---
Change since RFC:
Adds missing address-cells and size-cells and change reg cell
accordingly.
---
 .../remoteproc/renesas,rcar-rproc.yaml        | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
new file mode 100644
index 000000000000..dcb6b0f75dda
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car remote processor controller bindings
+
+maintainers:
+  - Julien Massot <julien.massot@iot.bzh>
+
+description: |
+  This document defines the binding for the remoteproc component that loads and
+  boots firmwares on the Renesas R-Car family chipset.
+  R-Car gen3 family may have a realtime processor, this processor share peripheral
+  and RAM with the host processor with the same address map.
+
+properties:
+  compatible:
+    const: renesas,rcar-cr7
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    description:
+      List of phandles to the reserved memory regions associated with the
+      remoteproc device. This is variable and describes the memories shared with
+      the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+      vrings, ...).
+      (see ../reserved-memory/reserved-memory.yaml)
+
+required:
+  - compatible
+  - resets
+  - memory-region
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cr7_ram: cr7_ram@40040000 {
+            no-map;
+            reg = <0x0 0x40040000 0x0 0x1fc0000>;
+        };
+    };
+
+    cr7_rproc: cr7 {
+        compatible = "renesas,rcar-cr7";
+        memory-region = <&cr7_ram>;
+        power-domains = <&sysc R8A7795_PD_CR7>;
+        resets = <&cpg 222>;
+        status = "okay";
+    };
+
+...
-- 
2.31.1



  reply	other threads:[~2021-11-15 13:53 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-15 13:50 [PATCH v1 0/3] Initial Renesas R-Car remoteproc support Julien Massot
2021-11-15 13:50 ` Julien Massot [this message]
2021-11-29 22:01   ` [PATCH v1 1/3] dt-bindings: remoteproc: Add Renesas R-Car Rob Herring
2021-11-30  8:51     ` Julien Massot
2021-11-15 13:50 ` [PATCH v1 2/3] arm64: dts: renesas: r8a77951: Add CR7 realtime processor Julien Massot
2022-01-10 13:00   ` Geert Uytterhoeven
2021-11-15 13:50 ` [PATCH v1 3/3] remoteproc: Add Renesas rcar driver Julien Massot
2021-11-15 14:12   ` Biju Das
2021-11-15 14:41     ` Julien Massot
2021-11-15 15:17       ` Biju Das
2021-11-22 18:37   ` Mathieu Poirier
2021-11-24 11:07     ` Julien Massot
2021-11-24 17:35       ` Mathieu Poirier
2021-11-15 18:10 ` [PATCH v1 0/3] Initial Renesas R-Car remoteproc support Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211115135032.129227-2-julien.massot@iot.bzh \
    --to=julien.massot@iot.bzh \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).