From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>
Cc: "Jakub Kicinski" <kuba@kernel.org>,
"David Miller" <davem@davemloft.net>,
"Russell King" <rmk+kernel@armlinux.org.uk>,
"Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net-next 7/8] net: phy: marvell10g: Use tabs instead of spaces for indentation
Date: Wed, 17 Nov 2021 23:50:49 +0100 [thread overview]
Message-ID: <20211117225050.18395-8-kabel@kernel.org> (raw)
In-Reply-To: <20211117225050.18395-1-kabel@kernel.org>
Some register definitions were defined with spaces used for indentation.
Change them to tabs.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
drivers/net/phy/marvell10g.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index d289641190db..0cb9b4ef09c7 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -117,16 +117,16 @@ enum {
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5,
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6,
MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7,
- MV_V2_PORT_INTR_STS = 0xf040,
- MV_V2_PORT_INTR_MASK = 0xf043,
- MV_V2_PORT_INTR_STS_WOL_EN = BIT(8),
- MV_V2_MAGIC_PKT_WORD0 = 0xf06b,
- MV_V2_MAGIC_PKT_WORD1 = 0xf06c,
- MV_V2_MAGIC_PKT_WORD2 = 0xf06d,
+ MV_V2_PORT_INTR_STS = 0xf040,
+ MV_V2_PORT_INTR_MASK = 0xf043,
+ MV_V2_PORT_INTR_STS_WOL_EN = BIT(8),
+ MV_V2_MAGIC_PKT_WORD0 = 0xf06b,
+ MV_V2_MAGIC_PKT_WORD1 = 0xf06c,
+ MV_V2_MAGIC_PKT_WORD2 = 0xf06d,
/* Wake on LAN registers */
- MV_V2_WOL_CTRL = 0xf06e,
- MV_V2_WOL_CTRL_CLEAR_STS = BIT(15),
- MV_V2_WOL_CTRL_MAGIC_PKT_EN = BIT(0),
+ MV_V2_WOL_CTRL = 0xf06e,
+ MV_V2_WOL_CTRL_CLEAR_STS = BIT(15),
+ MV_V2_WOL_CTRL_MAGIC_PKT_EN = BIT(0),
/* Temperature control/read registers (88X3310 only) */
MV_V2_TEMP_CTRL = 0xf08a,
MV_V2_TEMP_CTRL_MASK = 0xc000,
--
2.32.0
next prev parent reply other threads:[~2021-11-17 22:51 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-17 22:50 [PATCH net-next 0/8] Extend `phy-mode` to string array Marek Behún
2021-11-17 22:50 ` [PATCH net-next 1/8] dt-bindings: ethernet-controller: support multiple PHY connection types Marek Behún
2021-11-18 16:27 ` Andrew Lunn
2021-11-17 22:50 ` [PATCH net-next 2/8] net: Update documentation for *_get_phy_mode() functions Marek Behún
2021-11-18 16:28 ` Andrew Lunn
2021-11-17 22:50 ` [PATCH net-next 3/8] device property: add helper function for getting phy mode bitmap Marek Behún
2021-11-18 16:31 ` Andrew Lunn
2021-11-17 22:50 ` [PATCH net-next 4/8] net: phylink: update supported_interfaces with modes from fwnode Marek Behún
2021-11-18 9:05 ` Russell King (Oracle)
2021-11-18 16:33 ` Andrew Lunn
2021-11-18 17:08 ` Russell King (Oracle)
2021-11-18 17:33 ` Marek Behún
2021-11-18 17:39 ` Russell King (Oracle)
2021-11-18 20:38 ` Sean Anderson
2021-11-17 22:50 ` [PATCH net-next 5/8] net: phylink: pass supported PHY interface modes to phylib Marek Behún
2021-11-18 9:32 ` Russell King (Oracle)
2021-11-18 16:27 ` Andrew Lunn
2021-11-18 16:28 ` Russell King (Oracle)
2021-11-17 22:50 ` [PATCH net-next 6/8] net: phy: marvell10g: Use generic macro for supported interfaces Marek Behún
2021-11-18 9:33 ` Russell King (Oracle)
2021-11-18 16:27 ` Andrew Lunn
2021-11-17 22:50 ` Marek Behún [this message]
2021-11-18 9:34 ` [PATCH net-next 7/8] net: phy: marvell10g: Use tabs instead of spaces for indentation Russell King (Oracle)
2021-11-17 22:50 ` [PATCH net-next 8/8] net: phy: marvell10g: select host interface configuration Marek Behún
2021-11-18 9:41 ` Russell King (Oracle)
2021-11-18 13:46 ` Marek Behún
2021-11-18 14:25 ` Russell King (Oracle)
2021-11-18 12:03 ` Vladimir Oltean
2021-11-18 13:22 ` Russell King (Oracle)
2021-11-18 14:20 ` Vladimir Oltean
2021-11-18 14:47 ` Russell King (Oracle)
2021-11-18 15:09 ` Vladimir Oltean
2021-11-18 15:20 ` Marek Behún
2021-11-18 15:59 ` Russell King (Oracle)
2021-11-18 13:56 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211117225050.18395-8-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).