From: Jernej Skrabec <jernej.skrabec@gmail.com>
To: linux-media@vger.kernel.org
Cc: ezequiel@vanguardiasur.com.ar, nicolas.dufresne@collabora.com,
mchehab@kernel.org, robh+dt@kernel.org, mripard@kernel.org,
wens@csie.org, p.zabel@pengutronix.de, andrzej.p@collabora.com,
gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-staging@lists.linux.dev,
Jernej Skrabec <jernej.skrabec@gmail.com>
Subject: [PATCH 6/7] media: hantro: Add support for Allwinner H6
Date: Mon, 22 Nov 2021 19:47:01 +0100 [thread overview]
Message-ID: <20211122184702.768341-7-jernej.skrabec@gmail.com> (raw)
In-Reply-To: <20211122184702.768341-1-jernej.skrabec@gmail.com>
Allwinner H6 has a Hantro G2 core used for VP9 decoding. It's not clear
at this time if HEVC is also supported or not.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
drivers/staging/media/hantro/Kconfig | 10 +-
drivers/staging/media/hantro/Makefile | 3 +
drivers/staging/media/hantro/hantro_drv.c | 3 +
drivers/staging/media/hantro/hantro_hw.h | 1 +
drivers/staging/media/hantro/sunxi_vpu_hw.c | 104 ++++++++++++++++++++
5 files changed, 120 insertions(+), 1 deletion(-)
create mode 100644 drivers/staging/media/hantro/sunxi_vpu_hw.c
diff --git a/drivers/staging/media/hantro/Kconfig b/drivers/staging/media/hantro/Kconfig
index 00a57d88c92e..3c5d833322c8 100644
--- a/drivers/staging/media/hantro/Kconfig
+++ b/drivers/staging/media/hantro/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config VIDEO_HANTRO
tristate "Hantro VPU driver"
- depends on ARCH_MXC || ARCH_ROCKCHIP || ARCH_AT91 || COMPILE_TEST
+ depends on ARCH_MXC || ARCH_ROCKCHIP || ARCH_AT91 || ARCH_SUNXI || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
select MEDIA_CONTROLLER
select MEDIA_CONTROLLER_REQUEST_API
@@ -40,3 +40,11 @@ config VIDEO_HANTRO_ROCKCHIP
default y
help
Enable support for RK3288, RK3328, and RK3399 SoCs.
+
+config VIDEO_HANTRO_SUNXI
+ bool "Hantro VPU Allwinner support"
+ depends on VIDEO_HANTRO
+ depends on ARCH_SUNXI || COMPILE_TEST
+ default y
+ help
+ Enable support for H6 SoC.
diff --git a/drivers/staging/media/hantro/Makefile b/drivers/staging/media/hantro/Makefile
index 28af0a1ee4bf..ebd5ede7bef7 100644
--- a/drivers/staging/media/hantro/Makefile
+++ b/drivers/staging/media/hantro/Makefile
@@ -33,3 +33,6 @@ hantro-vpu-$(CONFIG_VIDEO_HANTRO_SAMA5D4) += \
hantro-vpu-$(CONFIG_VIDEO_HANTRO_ROCKCHIP) += \
rockchip_vpu_hw.o
+
+hantro-vpu-$(CONFIG_VIDEO_HANTRO_SUNXI) += \
+ sunxi_vpu_hw.o
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 530994ab3024..54f34644ecdf 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -620,6 +620,9 @@ static const struct of_device_id of_hantro_match[] = {
#endif
#ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
{ .compatible = "microchip,sama5d4-vdec", .data = &sama5d4_vdec_variant, },
+#endif
+#ifdef CONFIG_VIDEO_HANTRO_SUNXI
+ { .compatible = "allwinner,sun50i-h6-vpu-g2", .data = &sunxi_vpu_variant, },
#endif
{ /* sentinel */ }
};
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index dbe51303724b..0676989b986b 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -308,6 +308,7 @@ extern const struct hantro_variant rk3288_vpu_variant;
extern const struct hantro_variant rk3328_vpu_variant;
extern const struct hantro_variant rk3399_vpu_variant;
extern const struct hantro_variant sama5d4_vdec_variant;
+extern const struct hantro_variant sunxi_vpu_variant;
extern const struct hantro_postproc_ops hantro_g1_postproc_ops;
extern const struct hantro_postproc_ops hantro_g2_postproc_ops;
diff --git a/drivers/staging/media/hantro/sunxi_vpu_hw.c b/drivers/staging/media/hantro/sunxi_vpu_hw.c
new file mode 100644
index 000000000000..05e964dc0499
--- /dev/null
+++ b/drivers/staging/media/hantro/sunxi_vpu_hw.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner Hantro G2 VPU codec driver
+ *
+ * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+ */
+
+#include <linux/clk.h>
+
+#include "hantro.h"
+#include "hantro_g2_regs.h"
+
+static const struct hantro_fmt sunxi_vpu_postproc_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .codec_mode = HANTRO_MODE_NONE,
+ .postprocessed = true,
+ },
+};
+
+static const struct hantro_fmt sunxi_vpu_dec_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV12_4L4,
+ .codec_mode = HANTRO_MODE_NONE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_VP9_FRAME,
+ .codec_mode = HANTRO_MODE_VP9_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 3840,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 2160,
+ .step_height = MB_DIM,
+ },
+ },
+};
+
+static irqreturn_t sunxi_vpu_irq(int irq, void *dev_id)
+{
+ struct hantro_dev *vpu = dev_id;
+ enum vb2_buffer_state state;
+ u32 status;
+
+ status = vdpu_read(vpu, G2_REG_INTERRUPT);
+ state = (status & G2_REG_INTERRUPT_DEC_RDY_INT) ?
+ VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
+
+ vdpu_write(vpu, 0, G2_REG_INTERRUPT);
+ vdpu_write(vpu, G2_REG_CONFIG_DEC_CLK_GATE_E, G2_REG_CONFIG);
+
+ hantro_irq_done(vpu, state);
+
+ return IRQ_HANDLED;
+}
+
+static int sunxi_vpu_hw_init(struct hantro_dev *vpu)
+{
+ clk_set_rate(vpu->clocks[0].clk, 300000000);
+
+ return 0;
+}
+
+static void sunxi_vpu_reset(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+
+ reset_control_reset(vpu->resets);
+}
+
+static const struct hantro_codec_ops sunxi_vpu_codec_ops[] = {
+ [HANTRO_MODE_VP9_DEC] = {
+ .run = hantro_g2_vp9_dec_run,
+ .done = hantro_g2_vp9_dec_done,
+ .reset = sunxi_vpu_reset,
+ .init = hantro_vp9_dec_init,
+ .exit = hantro_vp9_dec_exit,
+ },
+};
+
+static const struct hantro_irq sunxi_irqs[] = {
+ { NULL, sunxi_vpu_irq },
+};
+
+static const char * const sunxi_clk_names[] = { "mod", "bus" };
+
+const struct hantro_variant sunxi_vpu_variant = {
+ .dec_fmts = sunxi_vpu_dec_fmts,
+ .num_dec_fmts = ARRAY_SIZE(sunxi_vpu_dec_fmts),
+ .postproc_fmts = sunxi_vpu_postproc_fmts,
+ .num_postproc_fmts = ARRAY_SIZE(sunxi_vpu_postproc_fmts),
+ .postproc_ops = &hantro_g2_postproc_ops,
+ .codec = HANTRO_VP9_DECODER,
+ .codec_ops = sunxi_vpu_codec_ops,
+ .init = sunxi_vpu_hw_init,
+ .irqs = sunxi_irqs,
+ .num_irqs = ARRAY_SIZE(sunxi_irqs),
+ .clk_names = sunxi_clk_names,
+ .num_clocks = ARRAY_SIZE(sunxi_clk_names),
+ .double_buffer = 1,
+ .legacy_regs = 1,
+};
--
2.34.0
next prev parent reply other threads:[~2021-11-22 18:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-22 18:46 [PATCH 0/7] media: hantro: add Allwinner H6 support Jernej Skrabec
2021-11-22 18:46 ` [PATCH 1/7] media: hantro: add support for reset lines Jernej Skrabec
2021-11-23 11:09 ` Andrzej Pietrasiewicz
2021-11-23 14:59 ` Dan Carpenter
2021-11-23 16:36 ` Andrzej Pietrasiewicz
2021-11-23 16:46 ` Jernej Škrabec
[not found] ` <CAAEAJfD3d4zjwvbv967+oe6awnAkZiGNKroYF5jvoTy=0sn+Pw@mail.gmail.com>
2021-11-30 10:39 ` Andrzej Pietrasiewicz
2021-11-22 18:46 ` [PATCH 2/7] media: hantro: vp9: use double buffering if needed Jernej Skrabec
2021-11-23 11:22 ` Andrzej Pietrasiewicz
2021-11-22 18:46 ` [PATCH 3/7] media: hantro: vp9: add support for legacy register set Jernej Skrabec
2021-11-23 12:06 ` Andrzej Pietrasiewicz
2021-11-22 18:46 ` [PATCH 4/7] media: hantro: move postproc enablement for old cores Jernej Skrabec
2021-11-23 12:12 ` Andrzej Pietrasiewicz
2021-11-25 12:00 ` Ezequiel Garcia
2021-11-25 19:21 ` Jernej Škrabec
2021-11-22 18:47 ` [PATCH 5/7] media: dt-bindings: allwinner: document H6 Hantro G2 binding Jernej Skrabec
2021-11-22 18:47 ` Jernej Skrabec [this message]
2021-11-23 12:23 ` [PATCH 6/7] media: hantro: Add support for Allwinner H6 Andrzej Pietrasiewicz
2021-11-22 18:47 ` [PATCH 7/7] arm64: dts: allwinner: h6: Add Hantro G2 node Jernej Skrabec
2021-11-22 18:51 ` [PATCH 0/7] media: hantro: add Allwinner H6 support Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211122184702.768341-7-jernej.skrabec@gmail.com \
--to=jernej.skrabec@gmail.com \
--cc=andrzej.p@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=linux-sunxi@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).