* [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board @ 2021-12-03 3:13 Changming Huang 2021-12-03 3:13 ` [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support Changming Huang 2021-12-13 20:29 ` [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board Rob Herring 0 siblings, 2 replies; 5+ messages in thread From: Changming Huang @ 2021-12-03 3:13 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree, robh+dt, arnd, olof, soc, shawnguo, leoyang.li, krzysztof.kozlowski, linux, festevam, tharvey, marcel.ziswiler, jagan, dev, cniedermaier, sebastian.reichel Cc: Changming Huang Add the board ls1021a-iot in the binding docuemnt. Signed-off-by: Changming Huang <jerry.huang@nxp.com> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0b595b26061f..8b3f5d598ae6 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -901,6 +901,7 @@ properties: - fsl,ls1021a-qds - fsl,ls1021a-tsn - fsl,ls1021a-twr + - fsl,ls1021a-iot - const: fsl,ls1021a - description: LS1028A based Boards -- 2.25.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support 2021-12-03 3:13 [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board Changming Huang @ 2021-12-03 3:13 ` Changming Huang 2022-02-08 1:49 ` Jerry Huang 2021-12-13 20:29 ` [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board Rob Herring 1 sibling, 1 reply; 5+ messages in thread From: Changming Huang @ 2021-12-03 3:13 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree, robh+dt, arnd, olof, soc, shawnguo, leoyang.li, krzysztof.kozlowski, linux, festevam, tharvey, marcel.ziswiler, jagan, dev, cniedermaier, sebastian.reichel Cc: Changming Huang, Alison Wang The LS1021A-IoT gateway reference design is a purpose-built, small footprint hardware platform equipped with a wide array of both high-speed connectivity and low speed serial interfaces. CC: Li Yang <leoyang.li@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/ls1021a-iot.dts | 248 ++++++++++++++++++++++++++++++ 2 files changed, 250 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..8534f6f94bc3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -727,7 +727,8 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-tsn.dtb \ - ls1021a-twr.dtb + ls1021a-twr.dtb \ + ls1021a-iot.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-bk4.dtb \ diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts new file mode 100644 index 000000000000..47ad718dc542 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + max1239@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + codec: sgtl5000@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk 1>; + }; + + pca9555: pca9555@23 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x23>; + }; + + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; + + adt7461a@4c { + compatible = "adt7461a"; + reg = <0x4c>; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; -- 2.25.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* RE: [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support 2021-12-03 3:13 ` [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support Changming Huang @ 2022-02-08 1:49 ` Jerry Huang 2022-02-08 7:41 ` Arnd Bergmann 0 siblings, 1 reply; 5+ messages in thread From: Jerry Huang @ 2022-02-08 1:49 UTC (permalink / raw) To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, shawnguo@kernel.org, Leo Li, krzysztof.kozlowski@canonical.com, linux@rempel-privat.de, festevam@gmail.com, tharvey@gateworks.com, Marcel Ziswiler, jagan@amarulasolutions.com, dev@lynxeye.de, cniedermaier@dh-electronics.com, sebastian.reichel@collabora.com Cc: Alison Wang Any comment for this patch? Best Regards Jerry Huang -----Original Message----- From: Jerry Huang <jerry.huang@nxp.com> Sent: 2021年12月3日 11:14 To: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; robh+dt@kernel.org; arnd@arndb.de; olof@lixom.net; soc@kernel.org; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; krzysztof.kozlowski@canonical.com; linux@rempel-privat.de; festevam@gmail.com; tharvey@gateworks.com; Marcel Ziswiler <marcel.ziswiler@toradex.com>; jagan@amarulasolutions.com; dev@lynxeye.de; cniedermaier@dh-electronics.com; sebastian.reichel@collabora.com Cc: Jerry Huang <jerry.huang@nxp.com>; Alison Wang <alison.wang@nxp.com> Subject: [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support The LS1021A-IoT gateway reference design is a purpose-built, small footprint hardware platform equipped with a wide array of both high-speed connectivity and low speed serial interfaces. CC: Li Yang <leoyang.li@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/ls1021a-iot.dts | 248 ++++++++++++++++++++++++++++++ 2 files changed, 250 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..8534f6f94bc3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -727,7 +727,8 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-tsn.dtb \ - ls1021a-twr.dtb + ls1021a-twr.dtb \ + ls1021a-iot.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-bk4.dtb \ diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts new file mode 100644 index 000000000000..47ad718dc542 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + max1239@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + codec: sgtl5000@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk 1>; + }; + + pca9555: pca9555@23 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x23>; + }; + + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; + + adt7461a@4c { + compatible = "adt7461a"; + reg = <0x4c>; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; -- 2.25.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support 2022-02-08 1:49 ` Jerry Huang @ 2022-02-08 7:41 ` Arnd Bergmann 0 siblings, 0 replies; 5+ messages in thread From: Arnd Bergmann @ 2022-02-08 7:41 UTC (permalink / raw) To: Jerry Huang Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, shawnguo@kernel.org, Leo Li, krzysztof.kozlowski@canonical.com, linux@rempel-privat.de, festevam@gmail.com, tharvey@gateworks.com, Marcel Ziswiler, jagan@amarulasolutions.com, dev@lynxeye.de, cniedermaier@dh-electronics.com, sebastian.reichel@collabora.com, Alison Wang On Tue, Feb 8, 2022 at 2:49 AM Jerry Huang <jerry.huang@nxp.com> wrote: > > Any comment for this patch? Shawn gave a detailed review in December, maybe you missed it: https://lore.kernel.org/linux-arm-kernel/20211214040228.GD10916@dragon/ Arnd ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board 2021-12-03 3:13 [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board Changming Huang 2021-12-03 3:13 ` [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support Changming Huang @ 2021-12-13 20:29 ` Rob Herring 1 sibling, 0 replies; 5+ messages in thread From: Rob Herring @ 2021-12-13 20:29 UTC (permalink / raw) To: Changming Huang Cc: sebastian.reichel, linux-arm-kernel, krzysztof.kozlowski, linux, olof, marcel.ziswiler, jagan, festevam, devicetree, shawnguo, arnd, cniedermaier, linux-kernel, robh+dt, soc, tharvey, leoyang.li, dev On Fri, 03 Dec 2021 11:13:31 +0800, Changming Huang wrote: > Add the board ls1021a-iot in the binding docuemnt. > > Signed-off-by: Changming Huang <jerry.huang@nxp.com> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-02-08 7:41 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-12-03 3:13 [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board Changming Huang 2021-12-03 3:13 ` [PATCH 2/2] ARM: dts: Add initial LS1021A IoT board dts support Changming Huang 2022-02-08 1:49 ` Jerry Huang 2022-02-08 7:41 ` Arnd Bergmann 2021-12-13 20:29 ` [PATCH 1/2] dt-bindings: arm: fsl: add ls1021a-iot board Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).