From: Sumit Gupta <sumitg@nvidia.com>
To: <linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <robh+dt@kernel.org>
Cc: <sumitg@nvidia.com>, <bbasu@nvidia.com>, <vsethi@nvidia.com>,
<jsequeira@nvidia.com>
Subject: [Patch Resend v1 6/8] arm64: tegra: Add node for CBB2.0 in Tegra234 SOC
Date: Thu, 9 Dec 2021 22:52:04 +0530 [thread overview]
Message-ID: <20211209172206.17778-7-sumitg@nvidia.com> (raw)
In-Reply-To: <20211209172206.17778-1-sumitg@nvidia.com>
Control Backbone(CBB) version 2.0 is used in Tegra234 SOC.
Adding nodes to enable handling of errors from different
CBB 2.0 based fabrics in Tegra234 SOC.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 49 ++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index f0efb3a62804..4cef45df0a3e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -73,6 +73,22 @@
#mbox-cells = <2>;
};
+ sce-fabric@b600000 {
+ compatible = "nvidia,tegra234-sce-fabric";
+ reg = <0xb600000 0x40000>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,err-notifier-base = <0 0x19000>;
+ status = "okay";
+ };
+
+ rce-fabric@be00000 {
+ compatible = "nvidia,tegra234-rce-fabric";
+ reg = <0xbe00000 0x40000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,err-notifier-base = <0 0x19000>;
+ status = "okay";
+ };
+
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
reg = <0x0c150000 0x90000>;
@@ -109,6 +125,30 @@
interrupt-controller;
};
+ aon-fabric@c600000 {
+ compatible = "nvidia,tegra234-aon-fabric";
+ reg = <0xc600000 0x40000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,err-notifier-base = <0 0x17000>;
+ status = "okay";
+ };
+
+ bpmp-fabric@d600000 {
+ compatible = "nvidia,tegra234-bpmp-fabric";
+ reg = <0xd600000 0x40000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,err-notifier-base = <0 0x19000>;
+ status = "okay";
+ };
+
+ dce-fabric@de00000 {
+ compatible = "nvidia,tegra234-sce-fabric";
+ reg = <0xde00000 0x40000>;
+ interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,err-notifier-base = <0 0x19000>;
+ status = "okay";
+ };
+
gic: interrupt-controller@f400000 {
compatible = "arm,gic-v3";
reg = <0x0f400000 0x010000>, /* GICD */
@@ -120,6 +160,15 @@
#interrupt-cells = <3>;
interrupt-controller;
};
+
+ cbb-fabric@0x13a00000 {
+ compatible = "nvidia,tegra234-cbb-fabric";
+ reg = <0x13a00000 0x400000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,err-notifier-base = <0 0x60000>;
+ nvidia,off-mask-erd = <0 0x3a004>;
+ status = "okay";
+ };
};
sysram@40000000 {
--
2.17.1
next prev parent reply other threads:[~2021-12-09 17:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-09 17:21 [Patch Resend v1 0/8] CBB driver for Tegra194, Tegra234 & Tegra-Grace Sumit Gupta
2021-12-09 17:21 ` [Patch Resend v1 1/8] soc: tegra: set ERD bit to mask inband errors Sumit Gupta
2021-12-09 17:22 ` [Patch Resend v1 2/8] dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB1.0 binding Sumit Gupta
2021-12-09 20:55 ` Rob Herring
2021-12-09 17:22 ` [Patch Resend v1 3/8] arm64: tegra: Add node for CBB1.0 in Tegra194 SOC Sumit Gupta
2021-12-09 17:22 ` [Patch Resend v1 4/8] soc: tegra: cbb: Add CBB1.0 driver for Tegra194 Sumit Gupta
2021-12-09 17:22 ` [Patch Resend v1 5/8] dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB2.0 binding Sumit Gupta
2021-12-09 20:55 ` Rob Herring
2021-12-10 7:26 ` Sumit Gupta
2021-12-16 11:30 ` Thierry Reding
2021-12-16 15:06 ` Sumit Gupta
2021-12-16 16:38 ` Thierry Reding
2021-12-16 18:35 ` Sumit Gupta
2021-12-09 17:22 ` Sumit Gupta [this message]
2021-12-09 17:22 ` [Patch Resend v1 7/8] soc: tegra: cbb: Add driver for Tegra234 CBB2.0 Sumit Gupta
2021-12-09 17:22 ` [Patch Resend v1 8/8] soc: tegra: cbb: Add support for tegra-grace SOC Sumit Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211209172206.17778-7-sumitg@nvidia.com \
--to=sumitg@nvidia.com \
--cc=bbasu@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=jsequeira@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vsethi@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).