From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
festevam@gmail.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-tegra@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, devicetree@vger.kernel.org,
qiangqing.zhang@nxp.com, xiaoliang.yang_1@nxp.com
Subject: [PATCH v2] arm64: dts: imx8mp-evk: configure multiple queues on eqos
Date: Mon, 13 Dec 2021 12:45:46 +0800 [thread overview]
Message-ID: <20211213044546.9903-1-xiaoliang.yang_1@nxp.com> (raw)
Eqos ethernet support five queues on hardware, enable these queues and
configure the priority of each queue. Uses Strict Priority as scheduling
algorithms to ensure that the TSN function works.
The priority of each queue is a bitmask value that maps VLAN tag
priority to the queue. Since the hardware only supports five queues,
this patch maps priority 0-4 to queues one by one, and priority 5-7 to
queue 4.
The total fifo size of 5 queues is 8192 bytes, if enable 5 queues with
store-and-forward mode, it's not enough for large packets, which would
trigger fifo overflow frequently. This patch set DMA to thresh mode to
enable all 5 queues.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 57 ++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7b99fad6e4d6..e4c69594f067 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -86,6 +86,9 @@
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
+ snps,force_thresh_dma_mode;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
status = "okay";
mdio {
@@ -99,6 +102,60 @@
eee-broken-1000t;
};
};
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+ snps,tx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ snps,map-to-dma-channel = <4>;
+ };
+ };
};
&fec {
--
2.17.1
next reply other threads:[~2021-12-13 4:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-13 4:45 Xiaoliang Yang [this message]
2021-12-13 6:22 ` [PATCH v2] arm64: dts: imx8mp-evk: configure multiple queues on eqos Joakim Zhang
2021-12-16 6:49 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211213044546.9903-1-xiaoliang.yang_1@nxp.com \
--to=xiaoliang.yang_1@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-tegra@vger.kernel.org \
--cc=qiangqing.zhang@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).