From: Hsin-Yi Wang <hsinyi@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/4] arm64: dts: mt8183: Add katsu board
Date: Tue, 14 Dec 2021 00:28:53 +0800 [thread overview]
Message-ID: <20211213162856.235130-1-hsinyi@chromium.org> (raw)
Katsu is known as ASUS Chromebook Detachable CZ1.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
This patch depends on [1] to add Himax8279d MIPI-DSI LCD panel driver.
[1] https://patchwork.freedesktop.org/patch/462468/
---
arch/arm64/boot/dts/mediatek/Makefile | 2 +
.../dts/mediatek/mt8183-kukui-katsu-sku32.dts | 38 +++++++++++++++++
.../dts/mediatek/mt8183-kukui-katsu-sku38.dts | 42 +++++++++++++++++++
3 files changed, 82 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1613259b686576..c130518c3293d5 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -28,6 +28,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 00000000000000..f923b8c3c49c36
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+ model = "MediaTek katsu board";
+ compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+ status = "okay";
+
+ /delete-node/touchscreen@10;
+ touchscreen1: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&open_touch>;
+
+ interrupt-parent = <&pio>;
+ interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&panel {
+ compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 00000000000000..1ab14096a279c6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+ model = "MediaTek katsu sku38 board";
+ compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+ status = "okay";
+
+ /delete-node/touchscreen@10;
+ touchscreen1: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&open_touch>;
+
+ interrupt-parent = <&pio>;
+ interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&panel {
+ compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+ compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
--
2.34.1.173.g76aa8bc2d0-goog
next reply other threads:[~2021-12-13 16:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-13 16:28 Hsin-Yi Wang [this message]
2021-12-13 16:28 ` [PATCH v2 2/4] arm64: dts: mt8183: Add kukui-jacuzzi-makomo board Hsin-Yi Wang
2021-12-13 16:28 ` [PATCH v2 3/4] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-katsu Hsin-Yi Wang
2021-12-15 20:21 ` Rob Herring
2021-12-13 16:28 ` [PATCH v2 4/4] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-makomo Hsin-Yi Wang
2021-12-15 20:21 ` Rob Herring
2021-12-30 11:16 ` [PATCH v2 1/4] arm64: dts: mt8183: Add katsu board Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211213162856.235130-1-hsinyi@chromium.org \
--to=hsinyi@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).