devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Cc: robh+dt@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com,
	linux-arm-kernel@lists.infradead.org,
	linux-tegra@vger.kernel.org, linux-imx@nxp.com,
	kernel@pengutronix.de, devicetree@vger.kernel.org,
	qiangqing.zhang@nxp.com
Subject: Re: [PATCH v2] arm64: dts: imx8mp-evk: configure multiple queues on eqos
Date: Thu, 16 Dec 2021 14:49:23 +0800	[thread overview]
Message-ID: <20211216064922.GW4216@dragon> (raw)
In-Reply-To: <20211213044546.9903-1-xiaoliang.yang_1@nxp.com>

On Mon, Dec 13, 2021 at 12:45:46PM +0800, Xiaoliang Yang wrote:
> Eqos ethernet support five queues on hardware, enable these queues and
> configure the priority of each queue. Uses Strict Priority as scheduling
> algorithms to ensure that the TSN function works.
> 
> The priority of each queue is a bitmask value that maps VLAN tag
> priority to the queue. Since the hardware only supports five queues,
> this patch maps priority 0-4 to queues one by one, and priority 5-7 to
> queue 4.
> 
> The total fifo size of 5 queues is 8192 bytes, if enable 5 queues with
> store-and-forward mode, it's not enough for large packets, which would
> trigger fifo overflow frequently. This patch set DMA to thresh mode to
> enable all 5 queues.
> 
> Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 57 ++++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 7b99fad6e4d6..e4c69594f067 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -86,6 +86,9 @@
>  	pinctrl-0 = <&pinctrl_eqos>;
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethphy0>;
> +	snps,force_thresh_dma_mode;
> +	snps,mtl-tx-config = <&mtl_tx_setup>;
> +	snps,mtl-rx-config = <&mtl_rx_setup>;
>  	status = "okay";
>  
>  	mdio {
> @@ -99,6 +102,60 @@
>  			eee-broken-1000t;
>  		};
>  	};
> +
> +	mtl_tx_setup: tx-queues-config {
> +		snps,tx-queues-to-use = <5>;
> +		snps,tx-sched-sp;

Please have a newline between properties and child node ...

> +		queue0 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x1>;
> +		};

... and also between nodes.

> +		queue1 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x2>;
> +		};
> +		queue2 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x4>;
> +		};
> +		queue3 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x8>;
> +		};
> +		queue4 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0xf0>;
> +		};
> +	};

Ditto

Shawn

> +	mtl_rx_setup: rx-queues-config {
> +		snps,rx-queues-to-use = <5>;
> +		snps,rx-sched-sp;
> +		queue0 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x1>;
> +			snps,map-to-dma-channel = <0>;
> +		};
> +		queue1 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x2>;
> +			snps,map-to-dma-channel = <1>;
> +		};
> +		queue2 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x4>;
> +			snps,map-to-dma-channel = <2>;
> +		};
> +		queue3 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x8>;
> +			snps,map-to-dma-channel = <3>;
> +		};
> +		queue4 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0xf0>;
> +			snps,map-to-dma-channel = <4>;
> +		};
> +	};
>  };
>  
>  &fec {
> -- 
> 2.17.1
> 

      parent reply	other threads:[~2021-12-16  6:49 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-13  4:45 [PATCH v2] arm64: dts: imx8mp-evk: configure multiple queues on eqos Xiaoliang Yang
2021-12-13  6:22 ` Joakim Zhang
2021-12-16  6:49 ` Shawn Guo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211216064922.GW4216@dragon \
    --to=shawnguo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-tegra@vger.kernel.org \
    --cc=qiangqing.zhang@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=xiaoliang.yang_1@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).