From: Shawn Guo <shawnguo@kernel.org>
To: Yunus Bas <y.bas@phytec.de>
Cc: robh+dt@kernel.org, s.hauer@pengutronix.de,
devicetree@vger.kernel.org, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
Date: Thu, 16 Dec 2021 14:55:11 +0800 [thread overview]
Message-ID: <20211216065511.GX4216@dragon> (raw)
In-Reply-To: <20211213123833.3011525-2-y.bas@phytec.de>
On Mon, Dec 13, 2021 at 01:38:32PM +0100, Yunus Bas wrote:
> The PEB-AV-02 expansion adapter extends the phyBOARD-Mira boards to
> connect parallel LCD displays, either with capacitive or resistive
> touch.
>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
> Changes in v2:
> - Corrected confusing display node name
> - Updated edt_ft5406 compatible to fit dt-binding scheme
> - Removed some newlines
> ---
> .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 1 +
> .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 1 +
> .../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 1 +
> .../dts/imx6qdl-phytec-mira-peb-av-02.dtsi | 119 ++++++++++++++++++
> .../boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 1 +
> 5 files changed, 123 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> index b057fa664a6b..8165fae2b1d1 100644
> --- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> @@ -9,6 +9,7 @@
> #include "imx6qdl-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>
> / {
> model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
> diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> index db6e2cc36759..bbf5097ca974 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> @@ -9,6 +9,7 @@
> #include "imx6qdl-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>
> / {
> model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
> diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> index 51ff601b1aec..95051e18324f 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> @@ -9,6 +9,7 @@
> #include "imx6qdl-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>
> / {
> model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> new file mode 100644
> index 000000000000..9fa1de1fcace
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik
> + * Author: Christian Hemp <c.hemp@phytec.de>
> + */
> +
> +/ {
> + display: disp0 {
display0 for node name.
Shawn
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx-parallel-display";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_disp0>;
> + interface-pix-fmt = "rgb24";
> + status = "disabled";
> +
> + port@0 {
> + reg = <0>;
> +
> + display0_in: endpoint {
> + remote-endpoint = <&ipu1_di0_disp0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + display0_out: endpoint {
> + remote-endpoint = <&peb_panel_lcd_in>;
> + };
> + };
> + };
> +
> + panel-lcd {
> + compatible = "edt,etm0700g0edh6";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_disp0_pwr>;
> + power-supply = <®_display>;
> + enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + backlight = <&backlight>;
> + status = "disabled";
> +
> + port {
> + peb_panel_lcd_in: endpoint {
> + remote-endpoint = <&display0_out>;
> + };
> + };
> + };
> +
> + reg_display: regulator-peb-display {
> + compatible = "regulator-fixed";
> + regulator-name = "peb-display";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&i2c1 {
> + edt_ft5x06: touchscreen@38 {
> + compatible = "edt,edt-ft5406";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_edt_ft5x06>;
> + reg = <0x38>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <2 IRQ_TYPE_NONE>;
> + status = "disabled";
> + };
> +};
> +
> +&ipu1_di0_disp0 {
> + remote-endpoint = <&display0_in>;
> +};
> +
> +&iomuxc {
> + pinctrl_disp0: disp0grp {
> + fsl,pins = <
> + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
> + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
> + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
> + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x1b080
> + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
> + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
> + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
> + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
> + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
> + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
> + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
> + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
> + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
> + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
> + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
> + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
> + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
> + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
> + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
> + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
> + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
> + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
> + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
> + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
> + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
> + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
> + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
> + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
> + >;
> + };
> +
> + pinctrl_disp0_pwr: disp0pwrgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
> + >;
> + };
> +
> + pinctrl_edt_ft5x06: edtft5x06grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0xb0b1
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> index 06fe0c5315fc..343639cb035c 100644
> --- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> @@ -9,6 +9,7 @@
> #include "imx6qdl-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>
> / {
> model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-12-16 6:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-13 12:38 [PATCH v2 1/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board Yunus Bas
2021-12-13 12:38 ` [PATCH v2 2/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter Yunus Bas
2021-12-16 6:55 ` Shawn Guo [this message]
2021-12-13 12:38 ` [PATCH v2 3/3] ARM: dts: imx6: phytec: Add PEB-WLBT-05 support Yunus Bas
2021-12-16 6:56 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211216065511.GX4216@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=y.bas@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).