devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <conor.dooley@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<linux-clk@vger.kernel.org>, <robh+dt@kernel.org>,
	<devicetree@vger.kernel.org>
Cc: <krzysztof.kozlowski@canonical.com>, <geert@linux-m68k.org>,
	<david.abdurachmanov@gmail.com>, <palmer@dabbelt.com>,
	<daire.mcnamara@microchip.com>, <cyril.jean@microchip.com>,
	<conor.dooley@microchip.com>
Subject: [PATCH v8 0/2] CLK: microchip: Add clkcfg driver for Microchip PolarFire SoC
Date: Thu, 16 Dec 2021 09:43:02 +0000	[thread overview]
Message-ID: <20211216094304.24461-1-conor.dooley@microchip.com> (raw)

From: Conor Dooley <conor.dooley@microchip.com>

This patchset adds support for the Microchip PolarFire clkcfg
hardware block.

Changes since v7:
* Dropped clock-output-names again (oops)

Changes since v6:
* Dropped clock-output-names *as a required property*
* Dropped if(lock) check on spinlocks, added spinlocks to all
  read-modify-write register access
* Removed kfree()s on non-dynamically allocated variables
* Use devm_clk_get to get the reference clock
* Account for reserved clock when calculating the size of num_clks

Changes since v5:
* Dropped clock-output-names property

Major changes since v4:
* Adjusted license for microchip,mpfs-clock.h to match microchip,mpfs.yaml
* Corrected the number of clocks to 33 from 32

Major changes since v3:
* Patch reformatted so microchip,mpfs-clock.h is part of device-tree patch

Major changes since v2:
* In mpfs_cfg_clk_set_rate, return immediately if divider_get_val
    returns <0 
* rebased to v5.12-rc1

Major changes since v1:
 * Dependency on SOC_MICROCHIP_POLARFIRE
 * All references to PFSOC/pfsoc changed to MPFS/mpfs
 * Cleaned error handling in _probe
 * Re-ordered code to place structs et al at top

Daire McNamara (2):
  dt-bindings: clk: microchip: Add Microchip PolarFire host binding
  clk: microchip: Add driver for Microchip PolarFire SoC

 .../bindings/clock/microchip,mpfs.yaml        |  58 +++
 drivers/clk/Kconfig                           |   1 +
 drivers/clk/Makefile                          |   2 +-
 drivers/clk/microchip/Kconfig                 |   7 +
 drivers/clk/microchip/Makefile                |   6 +-
 drivers/clk/microchip/clk-mpfs.c              | 447 ++++++++++++++++++
 .../dt-bindings/clock/microchip,mpfs-clock.h  |  45 ++
 7 files changed, 563 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
 create mode 100644 drivers/clk/microchip/Kconfig
 create mode 100644 drivers/clk/microchip/clk-mpfs.c
 create mode 100644 include/dt-bindings/clock/microchip,mpfs-clock.h

-- 
2.33.1


             reply	other threads:[~2021-12-16  9:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-16  9:43 conor.dooley [this message]
2021-12-16  9:43 ` [PATCH v8 1/2] dt-bindings: clk: microchip: Add Microchip PolarFire host binding conor.dooley
2021-12-16  9:43 ` [PATCH v8 2/2] clk: microchip: Add driver for Microchip PolarFire SoC conor.dooley
2021-12-16 10:11   ` Geert Uytterhoeven
2021-12-16 12:07     ` Conor.Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211216094304.24461-1-conor.dooley@microchip.com \
    --to=conor.dooley@microchip.com \
    --cc=cyril.jean@microchip.com \
    --cc=daire.mcnamara@microchip.com \
    --cc=david.abdurachmanov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=palmer@dabbelt.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).