Re: [PATCH V5 0/9] arm64: imx8mn: Enable more imx8m Nano functions

[Shawn Guo <shawnguo@kernel.org>]

On Tue, Dec 14, 2021 at 06:46:17PM -0600, Adam Ford wrote:
> The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> different in others.  With the blk-ctrl driver for Mini in place,
> this series expands the blk-ctrl driver to support the Nano which
> opens the door for additional functions in the future.  As part of
> this series, it also addresses some issues in the GPCv2 driver and
> finally adds support for enabling USB and GPU.
> 
> V5:  Clean up the GPU clock assignments.
> V4:  Rebase on top of [1] which fixes hangs caused from CSI and DSI reset
>      and add the same fixes for CSI and DSI to the Nano
> V3:  Fixes an the yaml example
> V2:  Fixes the clock count in the blk-ctrl
> 
> [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html
> 
> Adam Ford (9):
>   soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
>   soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
>   dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
>   dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
>   soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
>   arm64: dts: imx8mn: add GPC node
>   arm64: dts: imx8mn: put USB controller into power-domains
>   arm64: dts: imx8mn: add DISP blk-ctrl
>   arm64: dts: imx8mn: Enable GPU

The series introduces hard dependency between different branches.  To
ease the merge process, let's postpone the DTS patches to the next
cycle.

Shawn