[PATCH] dt-binding: soc: qcom: convert rmtfs documentation to yaml

[PATCH] dt-binding: soc: qcom: convert rmtfs documentation to yaml

[David Heidelberg]

Convert Qualcomm Remote File System Memory binding to the yaml format.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 .../reserved-memory/qcom,rmtfs-mem.yaml       | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml

diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
new file mode 100644
index 000000000000..2998f1c8f0db
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,rmtfs-mem.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Remote File System Memory
+
+description: |
+  This binding describes the Qualcomm remote filesystem memory, which serves the
+  purpose of describing the shared memory region used for remote processors to
+  access block device data using the Remote Filesystem protocol.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,rmtfs-mem
+
+  qcom,client-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      identifier of the client to use this region for buffers
+
+  qcom,vmid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      vmid of the remote processor, to set up memory protection
+
+required:
+  - qcom,client-id
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rmtfs@86700000 {
+            compatible = "qcom,rmtfs-mem";
+            reg = <0x86700000 0xe0000>;
+            no-map;
+
+            qcom,client-id = <1>;
+        };
+    };
-- 
2.34.1