* [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
@ 2021-12-21 1:57 Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 02/29] ARM: dts: ls1021a-tsn: " Sasha Levin
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vladimir Oltean, Florian Fainelli, Oleksij Rempel, Shawn Guo,
Sasha Levin, robh+dt, devicetree, linux-arm-kernel
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit f2c2e9ebb2cf476c09e59d073db031fbf7ef4914 ]
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6qp-prtwd3.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index b92e0f2748a51..29dd59bfa73dd 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -178,6 +178,8 @@ port@4 {
label = "cpu";
ethernet = <&fec>;
phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <2000>;
+ tx-internal-delay-ps = <2000>;
fixed-link {
speed = <100>;
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.15 02/29] ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
@ 2021-12-21 1:57 ` Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 24/29] riscv: dts: sifive unmatched: Name gpio lines Sasha Levin
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vladimir Oltean, Florian Fainelli, Shawn Guo, Sasha Levin,
leoyang.li, robh+dt, linux-arm-kernel, devicetree
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit e691f9282a89e24a8e87cdb91a181c6283ee5124 ]
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to not apply delays
in any direction (mostly because the SJA1105T can't do that, so this
board uses PCB traces). To preserve that but also silence the driver,
use explicit delays of 0 ns. The delay information from the phy-mode is
ignored by new kernels (it's still RGMII as long as it's "rgmii*"
something), and the explicit {rx,tx}-internal-delay-ps properties are
ignored by old kernels, so the change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/ls1021a-tsn.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index aca78b5eddf20..194748737724c 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -90,6 +90,8 @@ port@4 {
/* Internal port connected to eth2 */
ethernet = <&enet2>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
reg = <4>;
fixed-link {
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.15 24/29] riscv: dts: sifive unmatched: Name gpio lines
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 02/29] ARM: dts: ls1021a-tsn: " Sasha Levin
@ 2021-12-21 1:57 ` Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 25/29] riscv: dts: sifive unmatched: Expose the board ID eeprom Sasha Levin
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vincent Pelletier, Palmer Dabbelt, Sasha Levin, robh+dt,
paul.walmsley, palmer, aou, qiuwenbo, yash.shah, devicetree,
linux-riscv
From: Vincent Pelletier <plr.vincent@gmail.com>
[ Upstream commit ea81b91e4e256b0bb75d47ad3a5c230b2171a005 ]
Follow the pin descriptions given in the version 3 of the board schematics.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 2e4ea84f27e77..a788b99638af8 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -250,4 +250,8 @@ &pwm1 {
&gpio {
status = "okay";
+ gpio-line-names = "J29.1", "PMICNTB", "PMICSHDN", "J8.1", "J8.3",
+ "PCIe_PWREN", "THERM", "UBRDG_RSTN", "PCIe_PERSTN",
+ "ULPI_RSTN", "J8.2", "UHUB_RSTN", "GEMGXL_RST", "J8.4",
+ "EN_VDD_SD", "SD_CD";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.15 25/29] riscv: dts: sifive unmatched: Expose the board ID eeprom
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 02/29] ARM: dts: ls1021a-tsn: " Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 24/29] riscv: dts: sifive unmatched: Name gpio lines Sasha Levin
@ 2021-12-21 1:57 ` Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 26/29] riscv: dts: sifive unmatched: Expose the PMIC sub-functions Sasha Levin
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vincent Pelletier, Palmer Dabbelt, Sasha Levin, robh+dt,
paul.walmsley, palmer, aou, qiuwenbo, yash.shah, devicetree,
linux-riscv
From: Vincent Pelletier <plr.vincent@gmail.com>
[ Upstream commit 8120393b74b31bbaf293f59896de6b0d50febc48 ]
Mark it as read-only as it is factory-programmed with identifying
information, and no executable nor configuration:
- eth MAC address
- board model (PCB version, BoM version)
- board serial number
Accidental modification would cause misidentification which could brick
the board, so marking read-only seem like both a safe and non-constraining
choice.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index a788b99638af8..7ea1c8da5fb2e 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -63,6 +63,16 @@ temperature-sensor@4c {
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
};
+ eeprom@54 {
+ compatible = "microchip,24c02", "atmel,24c02";
+ reg = <0x54>;
+ vcc-supply = <&vdd_bpro>;
+ label = "board-id";
+ pagesize = <16>;
+ read-only;
+ size = <256>;
+ };
+
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.15 26/29] riscv: dts: sifive unmatched: Expose the PMIC sub-functions
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
` (2 preceding siblings ...)
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 25/29] riscv: dts: sifive unmatched: Expose the board ID eeprom Sasha Levin
@ 2021-12-21 1:57 ` Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 27/29] riscv: dts: sifive unmatched: Fix regulator for board rev3 Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 28/29] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Sasha Levin
5 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vincent Pelletier, Palmer Dabbelt, Sasha Levin, robh+dt, palmer,
paul.walmsley, aou, qiuwenbo, yash.shah, devicetree, linux-riscv
From: Vincent Pelletier <plr.vincent@gmail.com>
[ Upstream commit cd29cc8ad2540a4f9a0a3e174394d39e648ef941 ]
These sub-functions are available in the chip revision on this board, so
expose them.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 7ea1c8da5fb2e..dd110ba00e871 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -80,6 +80,18 @@ pmic@58 {
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+
regulators {
vdd_bcore1: bcore1 {
regulator-min-microvolt = <900000>;
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.15 27/29] riscv: dts: sifive unmatched: Fix regulator for board rev3
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
` (3 preceding siblings ...)
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 26/29] riscv: dts: sifive unmatched: Expose the PMIC sub-functions Sasha Levin
@ 2021-12-21 1:57 ` Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 28/29] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Sasha Levin
5 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vincent Pelletier, Palmer Dabbelt, Sasha Levin, robh+dt,
paul.walmsley, palmer, aou, qiuwenbo, yash.shah, devicetree,
linux-riscv
From: Vincent Pelletier <plr.vincent@gmail.com>
[ Upstream commit ad931d9b3b2e21586de8e6b34346d0a30c13721d ]
The existing values are rejected by the da9063 regulator driver, as they
are unachievable with the declared chip setup (non-merged vcore and bmem
are unable to provide the declared curent).
Fix voltages to match rev3 schematics, which also matches their boot-up
configuration within the chip's available precision.
Declare bcore1/bcore2 and bmem/bio as merged.
Set ldo09 and ldo10 as always-on as their consumers are not declared but
exist.
Drop ldo current limits as there is no current limit feature for these
regulators in the DA9063. Fixes warnings like:
DA9063_LDO3: Operation of current configuration missing
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/sifive/hifive-unmatched-a00.dts | 84 ++++++-------------
1 file changed, 24 insertions(+), 60 deletions(-)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index dd110ba00e871..09d9342282339 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -93,47 +93,31 @@ wdt {
};
regulators {
- vdd_bcore1: bcore1 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-min-microamp = <5000000>;
- regulator-max-microamp = <5000000>;
- regulator-always-on;
- };
-
- vdd_bcore2: bcore2 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-min-microamp = <5000000>;
- regulator-max-microamp = <5000000>;
+ vdd_bcore: bcores-merged {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microamp = <4800000>;
+ regulator-max-microamp = <4800000>;
regulator-always-on;
};
vdd_bpro: bpro {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <2500000>;
- regulator-max-microamp = <2500000>;
+ regulator-min-microamp = <2400000>;
+ regulator-max-microamp = <2400000>;
regulator-always-on;
};
vdd_bperi: bperi {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <1060000>;
+ regulator-max-microvolt = <1060000>;
regulator-min-microamp = <1500000>;
regulator-max-microamp = <1500000>;
regulator-always-on;
};
- vdd_bmem: bmem {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <3000000>;
- regulator-always-on;
- };
-
- vdd_bio: bio {
+ vdd_bmem_bio: bmem-bio-merged {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3000000>;
@@ -144,86 +128,66 @@ vdd_bio: bio {
vdd_ldo1: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <100000>;
regulator-always-on;
};
vdd_ldo2: ldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
regulator-always-on;
};
vdd_ldo3: ldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo4: ldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_ldo5: ldo5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <100000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo6: ldo6 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_ldo7: ldo7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo8: ldo8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ld09: ldo9 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-always-on;
};
vdd_ldo10: ldo10 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <300000>;
- regulator-max-microamp = <300000>;
+ regulator-always-on;
};
vdd_ldo11: ldo11 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
- regulator-min-microamp = <300000>;
- regulator-max-microamp = <300000>;
regulator-always-on;
};
};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.15 28/29] riscv: dts: sifive unmatched: Link the tmp451 with its power supply
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
` (4 preceding siblings ...)
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 27/29] riscv: dts: sifive unmatched: Fix regulator for board rev3 Sasha Levin
@ 2021-12-21 1:57 ` Sasha Levin
5 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2021-12-21 1:57 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vincent Pelletier, Palmer Dabbelt, Sasha Levin, robh+dt,
paul.walmsley, palmer, aou, qiuwenbo, yash.shah, devicetree,
linux-riscv
From: Vincent Pelletier <plr.vincent@gmail.com>
[ Upstream commit f6f7fbb89bf8dc9132fde55cfe67483138eea880 ]
Fixes the following probe warning:
lm90 0-004c: Looking up vcc-supply from device tree
lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed
lm90 0-004c: supply vcc not found, using dummy regulator
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 09d9342282339..0c4a508869059 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -59,6 +59,7 @@ &i2c0 {
temperature-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
+ vcc-supply = <&vdd_bpro>;
interrupt-parent = <&gpio>;
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-12-21 1:59 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-21 1:57 [PATCH AUTOSEL 5.15 01/29] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 02/29] ARM: dts: ls1021a-tsn: " Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 24/29] riscv: dts: sifive unmatched: Name gpio lines Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 25/29] riscv: dts: sifive unmatched: Expose the board ID eeprom Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 26/29] riscv: dts: sifive unmatched: Expose the PMIC sub-functions Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 27/29] riscv: dts: sifive unmatched: Fix regulator for board rev3 Sasha Levin
2021-12-21 1:57 ` [PATCH AUTOSEL 5.15 28/29] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).