From: Liam Beguin <liambeguin@gmail.com>
To: liambeguin@gmail.com, peda@axentia.se, jic23@kernel.org,
andy.shevchenko@gmail.com, lars@metafoo.de
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: [PATCH v11 12/15] iio: afe: rescale: add RTD temperature sensor support
Date: Tue, 21 Dec 2021 22:46:43 -0500 [thread overview]
Message-ID: <20211222034646.222189-13-liambeguin@gmail.com> (raw)
In-Reply-To: <20211222034646.222189-1-liambeguin@gmail.com>
From: Liam Beguin <lvb@xiphos.com>
An RTD (Resistance Temperature Detector) is a kind of temperature
sensor used to get a linear voltage to temperature reading within a
give range (usually 0 to 100 degrees Celsius). Common types of RTDs
include PT100, PT500, and PT1000.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
drivers/iio/afe/iio-rescale.c | 48 +++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 27f99ce67b94..8cf392500f18 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -393,10 +393,52 @@ static int rescale_voltage_divider_props(struct device *dev,
return 0;
}
+static int rescale_temp_sense_rtd_props(struct device *dev,
+ struct rescale *rescale)
+{
+ u32 factor;
+ u32 alpha;
+ u32 iexc;
+ u32 tmp;
+ int ret;
+ u32 r0;
+
+ ret = device_property_read_u32(dev, "excitation-current-microamp",
+ &iexc);
+ if (ret) {
+ dev_err(dev, "failed to read excitation-current-microamp: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha);
+ if (ret) {
+ dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "r-naught-ohms", &r0);
+ if (ret) {
+ dev_err(dev, "failed to read r-naught-ohms: %d\n", ret);
+ return ret;
+ }
+
+ tmp = r0 * iexc * alpha / MICRO;
+ factor = gcd(tmp, MICRO);
+ rescale->numerator = MICRO / factor;
+ rescale->denominator = tmp / factor;
+
+ rescale->offset = -1 * ((r0 * iexc) / MICRO * MILLI);
+
+ return 0;
+}
+
enum rescale_variant {
CURRENT_SENSE_AMPLIFIER,
CURRENT_SENSE_SHUNT,
VOLTAGE_DIVIDER,
+ TEMP_SENSE_RTD,
};
static const struct rescale_cfg rescale_cfg[] = {
@@ -412,6 +454,10 @@ static const struct rescale_cfg rescale_cfg[] = {
.type = IIO_VOLTAGE,
.props = rescale_voltage_divider_props,
},
+ [TEMP_SENSE_RTD] = {
+ .type = IIO_TEMP,
+ .props = rescale_temp_sense_rtd_props,
+ },
};
static const struct of_device_id rescale_match[] = {
@@ -421,6 +467,8 @@ static const struct of_device_id rescale_match[] = {
.data = &rescale_cfg[CURRENT_SENSE_SHUNT], },
{ .compatible = "voltage-divider",
.data = &rescale_cfg[VOLTAGE_DIVIDER], },
+ { .compatible = "temperature-sense-rtd",
+ .data = &rescale_cfg[TEMP_SENSE_RTD], },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rescale_match);
--
2.34.0
next prev parent reply other threads:[~2021-12-22 3:47 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-22 3:46 [PATCH v11 00/15] iio: afe: add temperature rescaling support Liam Beguin
2021-12-22 3:46 ` [PATCH v11 01/15] iio: inkern: apply consumer scale on IIO_VAL_INT cases Liam Beguin
2021-12-22 3:46 ` [PATCH v11 02/15] iio: inkern: apply consumer scale when no channel scale is available Liam Beguin
2021-12-22 3:46 ` [PATCH v11 03/15] iio: inkern: make a best effort on offset calculation Liam Beguin
2021-12-22 3:46 ` [PATCH v11 04/15] iio: afe: rescale: expose scale processing function Liam Beguin
2021-12-22 10:21 ` Andy Shevchenko
2021-12-22 18:20 ` Liam Beguin
2021-12-22 18:52 ` Andy Shevchenko
2021-12-22 19:42 ` Liam Beguin
2021-12-22 19:50 ` Andy Shevchenko
2021-12-22 20:04 ` Liam Beguin
2021-12-22 3:46 ` [PATCH v11 05/15] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support Liam Beguin
2021-12-22 3:46 ` [PATCH v11 06/15] iio: afe: rescale: add offset support Liam Beguin
2021-12-22 3:46 ` [PATCH v11 07/15] iio: afe: rescale: use s64 for temporary scale calculations Liam Beguin
2021-12-22 12:25 ` Andy Shevchenko
2021-12-22 18:21 ` Liam Beguin
2021-12-22 3:46 ` [PATCH v11 08/15] iio: afe: rescale: fix accuracy for small fractional scales Liam Beguin
2021-12-22 12:27 ` Andy Shevchenko
2021-12-22 3:46 ` [PATCH v11 09/15] iio: afe: rescale: reduce risk of integer overflow Liam Beguin
2021-12-22 12:29 ` Andy Shevchenko
2021-12-22 18:38 ` Liam Beguin
2021-12-22 18:56 ` Andy Shevchenko
2021-12-22 19:58 ` Liam Beguin
2021-12-22 21:32 ` Andy Shevchenko
2022-01-08 16:34 ` Liam Beguin
2022-01-08 17:55 ` Andy Shevchenko
2021-12-22 3:46 ` [PATCH v11 10/15] iio: afe: rescale: make use of units.h Liam Beguin
2021-12-22 12:33 ` Andy Shevchenko
2021-12-22 18:50 ` Liam Beguin
2021-12-22 18:59 ` Andy Shevchenko
2021-12-22 3:46 ` [PATCH v11 11/15] iio: test: add basic tests for the iio-rescale driver Liam Beguin
2021-12-22 12:38 ` Andy Shevchenko
2021-12-22 19:13 ` Liam Beguin
2021-12-22 3:46 ` Liam Beguin [this message]
2021-12-22 3:46 ` [PATCH v11 13/15] iio: afe: rescale: add temperature transducers Liam Beguin
2021-12-22 12:40 ` Andy Shevchenko
2021-12-22 3:46 ` [PATCH v11 14/15] dt-bindings: iio: afe: add bindings for temperature-sense-rtd Liam Beguin
2021-12-22 3:46 ` [PATCH v11 15/15] dt-bindings: iio: afe: add bindings for temperature transducers Liam Beguin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211222034646.222189-13-liambeguin@gmail.com \
--to=liambeguin@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).