devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Maxime Ripard <maxime@cerno.tech>, Rob Herring <robh@kernel.org>
Subject: [PATCH v3 1/2] dt-bindings: display: Turn lvds.yaml into a generic schema
Date: Tue, 11 Jan 2022 12:06:34 +0100	[thread overview]
Message-ID: <20220111110635.804371-1-maxime@cerno.tech> (raw)

The lvds.yaml file so far was both defining the generic LVDS properties
(such as data-mapping) that could be used for any LVDS sink, but also
the panel-lvds binding.

That last binding was to describe LVDS panels simple enough, and had a
number of other bindings using it as a base to specialise it further.

However, this situation makes it fairly hard to extend and reuse both
the generic parts, and the panel-lvds itself.

Let's remove the panel-lvds parts and leave only the generic LVDS
properties.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---

Changes from v2:
  - Fix references to that file

Changes from v1:
  - Moved the schema out of panel
---
 .../bindings/display/bridge/lvds-codec.yaml   |  2 +-
 .../bindings/display/{panel => }/lvds.yaml    | 31 ++-----------------
 .../display/panel/advantech,idk-1110wr.yaml   | 19 ++++++++++--
 .../display/panel/innolux,ee101ia-01d.yaml    | 23 ++++++++++++--
 .../display/panel/mitsubishi,aa104xd12.yaml   | 19 ++++++++++--
 .../display/panel/mitsubishi,aa121td01.yaml   | 19 ++++++++++--
 .../display/panel/sgd,gktw70sdae4se.yaml      | 19 ++++++++++--
 MAINTAINERS                                   |  2 +-
 8 files changed, 93 insertions(+), 41 deletions(-)
 rename Documentation/devicetree/bindings/display/{panel => }/lvds.yaml (86%)

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 5079c1cc337b..27b905b81b12 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -67,7 +67,7 @@ properties:
                   - vesa-24
                 description: |
                   The color signals mapping order. See details in
-                  Documentation/devicetree/bindings/display/panel/lvds.yaml
+                  Documentation/devicetree/bindings/display/lvds.yaml
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml
similarity index 86%
rename from Documentation/devicetree/bindings/display/panel/lvds.yaml
rename to Documentation/devicetree/bindings/display/lvds.yaml
index 49460c9dceea..55751402fb13 100644
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ b/Documentation/devicetree/bindings/display/lvds.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
+$id: http://devicetree.org/schemas/display/lvds.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LVDS Display Panel
+title: LVDS Display Common Properties
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
@@ -26,18 +26,7 @@ description: |+
   Device compatible with those specifications have been marketed under the
   FPD-Link and FlatLink brands.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
-  compatible:
-    contains:
-      const: panel-lvds
-    description:
-      Shall contain "panel-lvds" in addition to a mandatory panel-specific
-      compatible string defined in individual panel bindings. The "panel-lvds"
-      value shall never be used on its own.
-
   data-mapping:
     enum:
       - jeida-18
@@ -96,22 +85,6 @@ properties:
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
-  port: true
-  ports: true
-
-required:
-  - compatible
-  - data-mapping
-  - width-mm
-  - height-mm
-  - panel-timing
-
-oneOf:
-  - required:
-      - port
-  - required:
-      - ports
-
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
index 93878c2cd370..3a8c2c11f9bd 100644
--- a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: advantech,idk-1110wr
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-24
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
index a69681e724cb..566e11f6bfc0 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -11,15 +11,26 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: innolux,ee101ia-01d
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   backlight: true
+  data-mapping: true
   enable-gpios: true
   power-supply: true
   width-mm: true
@@ -27,5 +38,13 @@ properties:
   panel-timing: true
   port: true
 
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
 additionalProperties: false
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
index b5e7ee230fa6..5cf3c588f46d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa104xd12
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
index 977c50a85b67..54750cc5440d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa121td01
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
index e63a570ae59d..44e02decdf3a 100644
--- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: sgd,gktw70sdae4se
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: sgd,gktw70sdae4se
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-18
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - port
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
 
 examples:
   - |+
diff --git a/MAINTAINERS b/MAINTAINERS
index 41d2916600e0..368072da0a05 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6079,7 +6079,7 @@ L:	dri-devel@lists.freedesktop.org
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
 F:	drivers/gpu/drm/panel/panel-lvds.c
-F:	Documentation/devicetree/bindings/display/panel/lvds.yaml
+F:	Documentation/devicetree/bindings/display/lvds.yaml
 
 DRM DRIVER FOR MANTIX MLAF057WE51 PANELS
 M:	Guido Günther <agx@sigxcpu.org>
-- 
2.34.1


             reply	other threads:[~2022-01-11 11:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-11 11:06 Maxime Ripard [this message]
2022-01-11 11:06 ` [PATCH v3 2/2] dt-bindings: panel: Introduce a panel-lvds binding Maxime Ripard
2022-01-11 13:05   ` Laurent Pinchart
2022-01-27 14:22     ` Maxime Ripard
2022-02-02  9:48       ` Maxime Ripard
2022-02-02 12:47         ` Laurent Pinchart
2022-02-02 13:16           ` Maxime Ripard
2022-02-02 13:21             ` Laurent Pinchart
2022-02-02 13:43               ` Maxime Ripard
2022-02-02 13:50                 ` Laurent Pinchart
2022-02-02  9:55   ` (subset) " Maxime Ripard
2022-01-11 13:02 ` [PATCH v3 1/2] dt-bindings: display: Turn lvds.yaml into a generic schema Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220111110635.804371-1-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frowand.list@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).