Re: [PATCH v2 3/3] Documentation:ABI:testing:admv1014: add ABI docs

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 10 Jan 2022 17:13:50 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add documentation for the use of the Digital Attenuator gain.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Hi Antoniu,

Looks good to me though I'm keen to get other people's opinions as
it is a little unusual.  So even if rest of the set is fine I'll
leave this on list for a little longer. (I'm reviewing backwards through
your series as makes more sense to me that way ;)

Thanks,

Jonathan

> ---
>  .../testing/sysfs-bus-iio-frequency-admv1014  | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
> new file mode 100644
> index 000000000000..5bcd96d77f45
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
> @@ -0,0 +1,23 @@
> +What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_coarse
> +KernelVersion:
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Read/write value for the digital attenuator gain (IF_I) with coarse steps.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_coarse
> +KernelVersion:
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Read/write value for the digital attenuator gain (IF_Q) with coarse steps.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_fine
> +KernelVersion:
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Read/write value for the digital attenuator gain (IF_I) with fine steps.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_fine
> +KernelVersion:
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Read/write value for the digital attenuator gain (IF_Q) with fine steps.