* [PATCH AUTOSEL 5.16 055/217] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts
[not found] <20220118021940.1942199-1-sashal@kernel.org>
@ 2022-01-18 2:16 ` Sasha Levin
2022-01-18 2:16 ` [PATCH AUTOSEL 5.16 056/217] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name Sasha Levin
` (8 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konrad Dybcio, Bjorn Andersson, Sasha Levin, agross, robh+dt,
linux-arm-msm, devicetree
From: Konrad Dybcio <konrad.dybcio@somainline.org>
[ Upstream commit 9e7f7b65c7f04c5cfda97d6bd0d452a49e60f24e ]
Using interrupts = <&pdc X Y> makes the interrupt framework interpret this as
the &pdc-nth range of the main interrupt controller (GIC). Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-5-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 973e18fe3b674..cd55797facf69 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -631,7 +631,7 @@ tsens0: thermal-sensor@c263000 {
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x8>; /* SROT */
#qcom,sensors = <16>;
- interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
@@ -642,7 +642,7 @@ tsens1: thermal-sensor@c265000 {
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x8>; /* SROT */
#qcom,sensors = <16>;
- interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index d134280e29390..a8c040c564096 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -910,7 +910,7 @@ tsens0: thermal-sensor@c263000 {
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x8>; /* SROT */
#qcom,sensors = <15>;
- interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
@@ -921,7 +921,7 @@ tsens1: thermal-sensor@c265000 {
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x8>; /* SROT */
#qcom,sensors = <14>;
- interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 056/217] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name
[not found] <20220118021940.1942199-1-sashal@kernel.org>
2022-01-18 2:16 ` [PATCH AUTOSEL 5.16 055/217] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts Sasha Levin
@ 2022-01-18 2:16 ` Sasha Levin
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 090/217] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node Sasha Levin
` (7 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konrad Dybcio, Bjorn Andersson, Sasha Levin, agross, robh+dt,
linux-arm-msm, devicetree
From: Konrad Dybcio <konrad.dybcio@somainline.org>
[ Upstream commit f52dd33943ca5f84ae76890f352f6d9e12512c3f ]
Thermal zone names should not be longer than 20 names, which is indicated by
a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to
fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-6-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a8c040c564096..c13858cf50dd2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2447,7 +2447,7 @@ camera1_alert0: trip-point0 {
};
};
- camera-thermal-bottom {
+ cam-thermal-bottom {
polling-delay-passive = <250>;
polling-delay = <1000>;
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 090/217] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
[not found] <20220118021940.1942199-1-sashal@kernel.org>
2022-01-18 2:16 ` [PATCH AUTOSEL 5.16 055/217] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts Sasha Levin
2022-01-18 2:16 ` [PATCH AUTOSEL 5.16 056/217] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name Sasha Levin
@ 2022-01-18 2:17 ` Sasha Levin
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 091/217] arm64: dts: ti: j721e-main: Fix 'dtbs_check' in " Sasha Levin
` (6 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Aswath Govindraju, Vignesh Raghavendra,
Sasha Levin, nm, kristo, robh+dt, linux-arm-kernel, devicetree
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]
Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index d60ef4f7dd0b7..05a627ad6cdc4 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,7 +32,7 @@ scm_conf: scm-conf@100000 {
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
- serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+ serdes_ln_ctrl: mux-controller@4080 {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 091/217] arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (2 preceding siblings ...)
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 090/217] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node Sasha Levin
@ 2022-01-18 2:17 ` Sasha Levin
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 103/217] arm64: dts: renesas: Fix thermal bindings Sasha Levin
` (5 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Aswath Govindraju, Vignesh Raghavendra,
Sasha Levin, nm, kristo, robh+dt, linux-arm-kernel, devicetree
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit 3f92a5be6084b77f764a8bbb881ac0d12cb9e863 ]
Fix 'dtbs_check' in serdes_ln_ctrl (mux@4080) node by changing the node
name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-3-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 08c8d1b47dcd9..e85c89eebfa31 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -42,7 +42,7 @@ scm_conf: scm-conf@100000 {
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
- serdes_ln_ctrl: mux@4080 {
+ serdes_ln_ctrl: mux-controller@4080 {
compatible = "mmio-mux";
reg = <0x00004080 0x50>;
#mux-control-cells = <1>;
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 103/217] arm64: dts: renesas: Fix thermal bindings
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (3 preceding siblings ...)
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 091/217] arm64: dts: ti: j721e-main: Fix 'dtbs_check' in " Sasha Levin
@ 2022-01-18 2:17 ` Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 119/217] arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards Sasha Levin
` (4 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kieran Bingham, Niklas Söderlund, Geert Uytterhoeven,
Sasha Levin, magnus.damm, robh+dt, linux-renesas-soc, devicetree
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
[ Upstream commit 82ce79391d0ec25ec8aaae3c0617b71048ff0836 ]
The binding node names for the thermal zones are not successfully
validated by the dt-schemas.
Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal. Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211104224033.3997504-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77960.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 4 ++--
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 +++++-----
9 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 6f4fffacfca21..e70aa5a087402 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2784,7 +2784,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 0f7bdfc90a0dc..6c5694fa66900 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2629,7 +2629,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2644,7 +2644,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2659,7 +2659,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 379a1300272ba..62209ab6deb9a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -2904,7 +2904,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2919,7 +2919,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2934,7 +2934,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 1768a3e6bb8da..193d81be40fc4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3375,7 +3375,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -3390,7 +3390,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -3405,7 +3405,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 2bd8169735d35..b526e4f0ee6a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -2972,7 +2972,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2987,7 +2987,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -3002,7 +3002,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 86d59e7e1a876..b1a00f5df4311 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -2730,7 +2730,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2745,7 +2745,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2760,7 +2760,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 08df75606430b..f9679a4dd85fa 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2784,7 +2784,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 6347d15e66b64..21fe602bd25af 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1580,7 +1580,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- thermal-sensor-1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -1599,7 +1599,7 @@ sensor1-critical {
};
};
- thermal-sensor-2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 43bf2cbfbd8f7..770a23b769d86 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -2607,7 +2607,7 @@ prr: chipid@fff00044 {
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2621,7 +2621,7 @@ sensor1_crit: sensor1-crit {
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2635,7 +2635,7 @@ sensor2_crit: sensor2-crit {
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
@@ -2649,7 +2649,7 @@ sensor3_crit: sensor3-crit {
};
};
- sensor_thermal4: sensor-thermal4 {
+ sensor4_thermal: sensor4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 3>;
@@ -2663,7 +2663,7 @@ sensor4_crit: sensor4-crit {
};
};
- sensor_thermal5: sensor-thermal5 {
+ sensor5_thermal: sensor5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 4>;
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 119/217] arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (4 preceding siblings ...)
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 103/217] arm64: dts: renesas: Fix thermal bindings Sasha Levin
@ 2022-01-18 2:18 ` Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 121/217] ARM: dts: qcom: sdx55: fix IPA interconnect definitions Sasha Levin
` (3 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jagan Teki, Heiko Stuebner, Sasha Levin, robh+dt, knaerzche,
devicetree, linux-arm-kernel, linux-rockchip
From: Jagan Teki <jagan@amarulasolutions.com>
[ Upstream commit f471b1b2db0819917c54099ab68349ad6a7e9e19 ]
This patch fixes the Bluetooth on ROCK Pi 4 boards.
ROCK Pi 4 boards has BCM4345C5 and now it is supported
on Mainline Linux, brcm,bcm43438-bt still working but
observed the BT Audio issues with latest test.
So, use the BCM4345C5 compatible and its associated
properties like clock-names as lpo and max-speed.
Attach vbat and vddio supply rails as well.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts | 7 +++++--
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts | 7 +++++--
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts | 7 +++++--
3 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
index dfad13d2ab249..5bd2b8db3d51a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
@@ -35,13 +35,16 @@ &uart0 {
status = "okay";
bluetooth {
- compatible = "brcm,bcm43438-bt";
+ compatible = "brcm,bcm4345c5";
clocks = <&rk808 1>;
- clock-names = "ext_clock";
+ clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
index 6c63e617063c9..cf48746a3ad81 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -34,13 +34,16 @@ &uart0 {
status = "okay";
bluetooth {
- compatible = "brcm,bcm43438-bt";
+ compatible = "brcm,bcm4345c5";
clocks = <&rk808 1>;
- clock-names = "ext_clock";
+ clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
index 99169bcd51c03..57ddf55ee6930 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
@@ -35,14 +35,17 @@ &uart0 {
status = "okay";
bluetooth {
- compatible = "brcm,bcm43438-bt";
+ compatible = "brcm,bcm4345c5";
clocks = <&rk808 1>;
- clock-names = "ext_clock";
+ clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
};
};
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 121/217] ARM: dts: qcom: sdx55: fix IPA interconnect definitions
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (5 preceding siblings ...)
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 119/217] arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards Sasha Levin
@ 2022-01-18 2:18 ` Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 133/217] HID: i2c-hid-of: Expose the touchscreen-inverted properties Sasha Levin
` (2 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alex Elder, David Heidelberg, Manivannan Sadhasivam,
David S . Miller, Sasha Levin, agross, bjorn.andersson, robh+dt,
linux-arm-msm, devicetree
From: Alex Elder <elder@linaro.org>
[ Upstream commit c0d6316c238b1bd743108bd4b08eda364f47c7c9 ]
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 44526ad9d210b..eee2f63b9bbab 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -333,12 +333,10 @@ ipa: ipa@1e40000 {
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
- interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
- <&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
- interconnect-names = "memory-a",
- "memory-b",
+ interconnect-names = "memory",
"imem",
"config";
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 133/217] HID: i2c-hid-of: Expose the touchscreen-inverted properties
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (6 preceding siblings ...)
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 121/217] ARM: dts: qcom: sdx55: fix IPA interconnect definitions Sasha Levin
@ 2022-01-18 2:18 ` Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 143/217] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 145/217] arm64: tegra: Adjust length of CCPLEX cluster MMIO region Sasha Levin
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alistair Francis, Rob Herring, Benjamin Tissoires, Sasha Levin,
dmitry.torokhov, robh+dt, jikos, andriy.shevchenko, dianders,
hdegoede, johnny.chuang.emc, jbroadus, mka, linux-input,
devicetree
From: Alistair Francis <alistair@alistair23.me>
[ Upstream commit b60d3c803d7603432a08aeaf988aff53b3a5ec64 ]
Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-3-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../devicetree/bindings/input/hid-over-i2c.txt | 2 ++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-core.c | 4 +++-
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-of.c | 10 +++++++++-
drivers/hid/i2c-hid/i2c-hid.h | 2 +-
6 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2f..34c43d3bddfd1 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
- vdd-supply: phandle of the regulator that provides the supply voltage.
- post-power-on-delay-ms: time required by the device after enabling its regulators
or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
Example:
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index a6f0257a26de3..b96ae15e0ad91 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -111,7 +111,7 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
}
return i2c_hid_core_probe(client, &ihid_acpi->ops,
- hid_descriptor_address);
+ hid_descriptor_address, 0);
}
static const struct acpi_device_id i2c_hid_acpi_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 517141138b007..4804d71e5293a 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -912,7 +912,7 @@ static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
}
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address)
+ u16 hid_descriptor_address, u32 quirks)
{
int ret;
struct i2c_hid *ihid;
@@ -1009,6 +1009,8 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
goto err_mem_free;
}
+ hid->quirks |= quirks;
+
return 0;
err_mem_free:
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 52674149a2750..b4dad66fa954d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -150,7 +150,7 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client,
goodix_i2c_hid_deassert_reset(ihid_goodix, true);
mutex_unlock(&ihid_goodix->regulator_mutex);
- return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+ return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
}
static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index 4bf7cea926379..97a27a803f58d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -71,6 +72,7 @@ static int i2c_hid_of_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct i2c_hid_of *ihid_of;
u16 hid_descriptor_address;
+ u32 quirks = 0;
int ret;
u32 val;
@@ -105,8 +107,14 @@ static int i2c_hid_of_probe(struct i2c_client *client,
if (ret)
return ret;
+ if (device_property_read_bool(dev, "touchscreen-inverted-x"))
+ quirks |= HID_QUIRK_X_INVERT;
+
+ if (device_property_read_bool(dev, "touchscreen-inverted-y"))
+ quirks |= HID_QUIRK_Y_INVERT;
+
return i2c_hid_core_probe(client, &ihid_of->ops,
- hid_descriptor_address);
+ hid_descriptor_address, quirks);
}
static const struct of_device_id i2c_hid_of_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 05a7827d211af..236cc062d5ef8 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -32,7 +32,7 @@ struct i2chid_ops {
};
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address);
+ u16 hid_descriptor_address, u32 quirks);
int i2c_hid_core_remove(struct i2c_client *client);
void i2c_hid_core_shutdown(struct i2c_client *client);
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 143/217] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (7 preceding siblings ...)
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 133/217] HID: i2c-hid-of: Expose the touchscreen-inverted properties Sasha Levin
@ 2022-01-18 2:18 ` Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 145/217] arm64: tegra: Adjust length of CCPLEX cluster MMIO region Sasha Levin
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Biwen Li, Li Yang, Shawn Guo, Sasha Levin, leoyang.li, robh+dt,
linux-arm-kernel, devicetree
From: Biwen Li <biwen.li@nxp.com>
[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 6e2a1da662fb4..4597848598df0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -272,11 +272,6 @@ temperature-sensor@4c {
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -318,6 +313,15 @@ mux: mux-controller {
};
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-mode = "rgmii-id";
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH AUTOSEL 5.16 145/217] arm64: tegra: Adjust length of CCPLEX cluster MMIO region
[not found] <20220118021940.1942199-1-sashal@kernel.org>
` (8 preceding siblings ...)
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 143/217] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus Sasha Levin
@ 2022-01-18 2:18 ` Sasha Levin
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2022-01-18 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Thierry Reding, Sasha Levin, robh+dt, thierry.reding, jonathanh,
spujar, mperttunen, devicetree, linux-tegra
From: Thierry Reding <treding@nvidia.com>
[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 9ac4f0140700f..8ab83b4ac0373 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1199,7 +1199,7 @@ sdmmc3_1v8: sdmmc3-1v8 {
ccplex@e000000 {
compatible = "nvidia,tegra186-ccplex-cluster";
- reg = <0x0 0x0e000000 0x0 0x3fffff>;
+ reg = <0x0 0x0e000000 0x0 0x400000>;
nvidia,bpmp = <&bpmp>;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-01-18 2:33 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20220118021940.1942199-1-sashal@kernel.org>
2022-01-18 2:16 ` [PATCH AUTOSEL 5.16 055/217] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts Sasha Levin
2022-01-18 2:16 ` [PATCH AUTOSEL 5.16 056/217] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name Sasha Levin
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 090/217] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node Sasha Levin
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 091/217] arm64: dts: ti: j721e-main: Fix 'dtbs_check' in " Sasha Levin
2022-01-18 2:17 ` [PATCH AUTOSEL 5.16 103/217] arm64: dts: renesas: Fix thermal bindings Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 119/217] arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 121/217] ARM: dts: qcom: sdx55: fix IPA interconnect definitions Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 133/217] HID: i2c-hid-of: Expose the touchscreen-inverted properties Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 143/217] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus Sasha Levin
2022-01-18 2:18 ` [PATCH AUTOSEL 5.16 145/217] arm64: tegra: Adjust length of CCPLEX cluster MMIO region Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).