[PATCH AUTOSEL 5.15 049/188] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name

[PATCH AUTOSEL 5.15 049/188] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit f52dd33943ca5f84ae76890f352f6d9e12512c3f ]

Thermal zone names should not be longer than 20 names, which is indicated by
a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to
fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-6-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e91cd8a5e5356..296ffb0e9888c 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2185,7 +2185,7 @@ camera1_alert0: trip-point0 {
 			};
 		};
 
-		camera-thermal-bottom {
+		cam-thermal-bottom {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 076/188] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]

Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 874cba75e9a5a..7daa280220442 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,7 +32,7 @@ scm_conf: scm-conf@100000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-- 
2.34.1

[PATCH AUTOSEL 5.15 077/188] arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 3f92a5be6084b77f764a8bbb881ac0d12cb9e863 ]

Fix 'dtbs_check' in serdes_ln_ctrl (mux@4080) node by changing the node
name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-3-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 08c8d1b47dcd9..e85c89eebfa31 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -42,7 +42,7 @@ scm_conf: scm-conf@100000 {
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: mux@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			reg = <0x00004080 0x50>;
 			#mux-control-cells = <1>;
-- 
2.34.1

[PATCH AUTOSEL 5.15 089/188] arm64: dts: renesas: Fix thermal bindings

[Sasha Levin]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

[ Upstream commit 82ce79391d0ec25ec8aaae3c0617b71048ff0836 ]

The binding node names for the thermal zones are not successfully
validated by the dt-schemas.

Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal.  Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211104224033.3997504-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a77951.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a77960.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a77961.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi |  6 +++---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |  4 ++--
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 +++++-----
 9 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 6f4fffacfca21..e70aa5a087402 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2784,7 +2784,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 0f7bdfc90a0dc..6c5694fa66900 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2629,7 +2629,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2644,7 +2644,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2659,7 +2659,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 379a1300272ba..62209ab6deb9a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -2904,7 +2904,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2919,7 +2919,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2934,7 +2934,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 1768a3e6bb8da..193d81be40fc4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3375,7 +3375,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -3390,7 +3390,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -3405,7 +3405,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 2bd8169735d35..b526e4f0ee6a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -2972,7 +2972,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2987,7 +2987,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -3002,7 +3002,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 041473aa5cd09..21fc95397c3c2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -2719,7 +2719,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2734,7 +2734,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2749,7 +2749,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 08df75606430b..f9679a4dd85fa 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2784,7 +2784,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 6347d15e66b64..21fe602bd25af 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1580,7 +1580,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		thermal-sensor-1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -1599,7 +1599,7 @@ sensor1-critical {
 			};
 		};
 
-		thermal-sensor-2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 631d520cebee5..26899fb768a73 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -1149,7 +1149,7 @@ prr: chipid@fff00044 {
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -1163,7 +1163,7 @@ sensor1_crit: sensor1-crit {
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -1177,7 +1177,7 @@ sensor2_crit: sensor2-crit {
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
@@ -1191,7 +1191,7 @@ sensor3_crit: sensor3-crit {
 			};
 		};
 
-		sensor_thermal4: sensor-thermal4 {
+		sensor4_thermal: sensor4-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 3>;
@@ -1205,7 +1205,7 @@ sensor4_crit: sensor4-crit {
 			};
 		};
 
-		sensor_thermal5: sensor-thermal5 {
+		sensor5_thermal: sensor5-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 4>;
-- 
2.34.1

[PATCH AUTOSEL 5.15 103/188] ARM: dts: qcom: sdx55: fix IPA interconnect definitions

[Sasha Levin]

From: Alex Elder <elder@linaro.org>

[ Upstream commit c0d6316c238b1bd743108bd4b08eda364f47c7c9 ]

The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.

Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.

Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a9..b5b784c5c65e4 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -334,12 +334,10 @@ ipa: ipa@1e40000 {
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
-					<&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
 					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
 					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
-			interconnect-names = "memory-a",
-					     "memory-b",
+			interconnect-names = "memory",
 					     "imem",
 					     "config";
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 113/188] HID: i2c-hid-of: Expose the touchscreen-inverted properties

[Sasha Levin]

From: Alistair Francis <alistair@alistair23.me>

[ Upstream commit b60d3c803d7603432a08aeaf988aff53b3a5ec64 ]

Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-3-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/input/hid-over-i2c.txt         |  2 ++
 drivers/hid/i2c-hid/i2c-hid-acpi.c                     |  2 +-
 drivers/hid/i2c-hid/i2c-hid-core.c                     |  4 +++-
 drivers/hid/i2c-hid/i2c-hid-of-goodix.c                |  2 +-
 drivers/hid/i2c-hid/i2c-hid-of.c                       | 10 +++++++++-
 drivers/hid/i2c-hid/i2c-hid.h                          |  2 +-
 6 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2f..34c43d3bddfd1 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
 - vdd-supply: phandle of the regulator that provides the supply voltage.
 - post-power-on-delay-ms: time required by the device after enabling its regulators
   or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
 
 Example:
 
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index a6f0257a26de3..b96ae15e0ad91 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -111,7 +111,7 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
 	}
 
 	return i2c_hid_core_probe(client, &ihid_acpi->ops,
-				  hid_descriptor_address);
+				  hid_descriptor_address, 0);
 }
 
 static const struct acpi_device_id i2c_hid_acpi_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 517141138b007..4804d71e5293a 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -912,7 +912,7 @@ static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
 }
 
 int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
-		       u16 hid_descriptor_address)
+		       u16 hid_descriptor_address, u32 quirks)
 {
 	int ret;
 	struct i2c_hid *ihid;
@@ -1009,6 +1009,8 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 		goto err_mem_free;
 	}
 
+	hid->quirks |= quirks;
+
 	return 0;
 
 err_mem_free:
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 52674149a2750..b4dad66fa954d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -150,7 +150,7 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client,
 		goodix_i2c_hid_deassert_reset(ihid_goodix, true);
 	mutex_unlock(&ihid_goodix->regulator_mutex);
 
-	return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+	return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
 }
 
 static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index 4bf7cea926379..97a27a803f58d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -21,6 +21,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/hid.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -71,6 +72,7 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct i2c_hid_of *ihid_of;
 	u16 hid_descriptor_address;
+	u32 quirks = 0;
 	int ret;
 	u32 val;
 
@@ -105,8 +107,14 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
+	if (device_property_read_bool(dev, "touchscreen-inverted-x"))
+		quirks |= HID_QUIRK_X_INVERT;
+
+	if (device_property_read_bool(dev, "touchscreen-inverted-y"))
+		quirks |= HID_QUIRK_Y_INVERT;
+
 	return i2c_hid_core_probe(client, &ihid_of->ops,
-				  hid_descriptor_address);
+				  hid_descriptor_address, quirks);
 }
 
 static const struct of_device_id i2c_hid_of_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 05a7827d211af..236cc062d5ef8 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -32,7 +32,7 @@ struct i2chid_ops {
 };
 
 int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
-		       u16 hid_descriptor_address);
+		       u16 hid_descriptor_address, u32 quirks);
 int i2c_hid_core_remove(struct i2c_client *client);
 
 void i2c_hid_core_shutdown(struct i2c_client *client);
-- 
2.34.1

[PATCH AUTOSEL 5.15 122/188] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus

[Sasha Levin]

From: Biwen Li <biwen.li@nxp.com>

[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]

The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index bfd14b64567e4..2f92e62ecafe9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -272,11 +272,6 @@ temperature-sensor@4c {
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -318,6 +313,15 @@ mux: mux-controller {
 
 };
 
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
-- 
2.34.1

[PATCH AUTOSEL 5.15 124/188] arm64: tegra: Adjust length of CCPLEX cluster MMIO region

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]

The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index e94f8add1a400..062e87e893316 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1079,7 +1079,7 @@ sdmmc3_1v8: sdmmc3-1v8 {
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
-- 
2.34.1