[PATCH AUTOSEL 5.10 040/116] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node

[PATCH AUTOSEL 5.10 040/116] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]

Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5832ad830ed14..1ab9f9604af6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,7 +25,7 @@ scm_conf: scm-conf@100000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-- 
2.34.1

[PATCH AUTOSEL 5.10 072/116] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus

[Sasha Levin]

From: Biwen Li <biwen.li@nxp.com>

[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]

The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 13cdc958ba3ea..71858c9376c25 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -261,11 +261,6 @@ temperature-sensor@4c {
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -307,6 +302,15 @@ mux: mux-controller {
 
 };
 
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
-- 
2.34.1

[PATCH AUTOSEL 5.10 073/116] arm64: tegra: Adjust length of CCPLEX cluster MMIO region

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]

The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 0c46ab7bbbf37..eec6418ecdb1a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -985,7 +985,7 @@ sdmmc3_1v8: sdmmc3-1v8 {
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
-- 
2.34.1