[PATCH] arm64: dts: qcom: sm8150: Add ufs power-domain entries

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

Add power-domain entries for UFS controller & phy nodes
in sm8150 dts.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 6012322a5984..7aa879eb24d7 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1637,6 +1637,8 @@ ufs_mem_hc: ufshc@1d84000 {
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 			resets = <&gcc GCC_UFS_PHY_BCR>;
 			reset-names = "rst";
 
@@ -1687,6 +1689,9 @@ ufs_mem_phy: phy@1d87000 {
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_CARD_GDSC>,
+					<&gcc UFS_PHY_GDSC>;
+			power-domain-names = "ufs_card_gdsc", "ufs_phy_gdsc";
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
-- 
2.34.1