From: Robert Hancock <robert.hancock@calian.com>
To: alsa-devel@alsa-project.org
Cc: lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
perex@perex.cz, tiwai@suse.com, michal.simek@xilinx.com,
kuninori.morimoto.gx@renesas.com,
maruthi.srinivas.bayyavarapu@xilinx.com,
devicetree@vger.kernel.org,
Robert Hancock <robert.hancock@calian.com>
Subject: [PATCH v3 0/6] ASoC: Xilinx fixes
Date: Thu, 20 Jan 2022 13:58:26 -0600 [thread overview]
Message-ID: <20220120195832.1742271-1-robert.hancock@calian.com> (raw)
There are drivers in mainline for the Xilinx Audio Formatter and Xilinx
I2S IP cores. However, because of a few issues, these were only really
usable with Xilinx's xlnx_pl_snd_card top-level driver, which is not in
mainline (and not suitable for mainline).
The fixes in this patchset, for the simple-card layer as well as the
Xilinx drivers, now allow these drivers to be properly used with
simple-card without any out-of-tree support code.
Changes since v2:
-drop patches already merged
-added constraint to simple-card to allow enforcing valid sample rates
Changes since v1:
-formatting fixes
-renamed last_sysclk variables to sysclk
-require exact match for clock divisor rather than rounding to nearest
-broke out driver data structure change in xlnx_i2s to separate patch
-added constraints for sample rate based on sysclk to xlnx_i2s
-switched to separate function for DAI parsing for platforms in simple_card
Robert Hancock (6):
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting
ASoC: xilinx: xlnx_i2s: create drvdata structure
ASoC: xilinx: xlnx_i2s: Handle sysclk setting
ASoC: simple-card-utils: Set sysclk on all components
ASoC: dt-bindings: simple-card: document new system-clock-fixed flag
ASoC: simple-card-utils: Add new system-clock-fixed flag
.../bindings/sound/simple-card.yaml | 11 ++
include/sound/simple_card_utils.h | 1 +
sound/soc/generic/simple-card-utils.c | 86 ++++++++--
sound/soc/xilinx/xlnx_formatter_pcm.c | 25 +++
sound/soc/xilinx/xlnx_i2s.c | 147 +++++++++++++-----
5 files changed, 223 insertions(+), 47 deletions(-)
--
2.31.1
next reply other threads:[~2022-01-20 19:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-20 19:58 Robert Hancock [this message]
2022-01-20 19:58 ` [PATCH v3 1/6] ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting Robert Hancock
2022-01-20 19:58 ` [PATCH v3 2/6] ASoC: xilinx: xlnx_i2s: create drvdata structure Robert Hancock
2022-01-21 9:06 ` Amadeusz Sławiński
2022-01-21 17:26 ` Robert Hancock
2022-01-20 19:58 ` [PATCH v3 3/6] ASoC: xilinx: xlnx_i2s: Handle sysclk setting Robert Hancock
2022-01-20 19:58 ` [PATCH v3 4/6] ASoC: simple-card-utils: Set sysclk on all components Robert Hancock
2022-01-21 0:24 ` Kuninori Morimoto
2022-01-20 19:58 ` [PATCH v3 5/6] ASoC: dt-bindings: simple-card: document new system-clock-fixed flag Robert Hancock
2022-01-20 19:58 ` [PATCH v3 6/6] ASoC: simple-card-utils: Add " Robert Hancock
2022-01-25 10:20 ` [PATCH v3 0/6] ASoC: Xilinx fixes Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220120195832.1742271-1-robert.hancock@calian.com \
--to=robert.hancock@calian.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=maruthi.srinivas.bayyavarapu@xilinx.com \
--cc=michal.simek@xilinx.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox