* [PATCH v3 1/3] dt-bindings: clock: Add Apple NCO
2022-01-21 17:55 [PATCH v3 0/3] Support for Apple SoCs' NCO blocks Martin Povišer
@ 2022-01-21 17:55 ` Martin Povišer
2022-01-21 17:56 ` [PATCH v3 2/3] clk: clk-apple-nco: Add driver for " Martin Povišer
2022-01-21 17:56 ` [PATCH v3 3/3] MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE Martin Povišer
2 siblings, 0 replies; 4+ messages in thread
From: Martin Povišer @ 2022-01-21 17:55 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt
Cc: marcan, sven, alyssa, linux-clk, devicetree, linux-kernel,
kettenis, Martin Povišer, Rob Herring
The NCO block found on Apple SoCs is a programmable clock generator
performing fractional division of a high frequency input clock.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Povišer <povik+lin@protonmail.com>
---
.../devicetree/bindings/clock/apple,nco.yaml | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/apple,nco.yaml
diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml
new file mode 100644
index 000000000000..23ee3964fbde
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+ - Martin Povišer <povik+lin@protonmail.com>
+
+description: |
+ The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+ such as the t8103 (M1) is a programmable clock generator performing
+ fractional division of a high frequency input clock.
+
+ It carries a number of independent channels and is typically used for
+ generation of audio bitclocks.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t6000-nco
+ - apple,t8103-nco
+ - const: apple,nco
+
+ clocks:
+ description:
+ Specifies the reference clock from which the output clocks
+ are derived through fractional division.
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - '#clock-cells'
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ nco_clkref: clock-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <900000000>;
+ clock-output-names = "nco-ref";
+ };
+
+ nco: clock-controller@23b044000 {
+ compatible = "apple,t8103-nco", "apple,nco";
+ reg = <0x3b044000 0x14000>;
+ #clock-cells = <1>;
+ clocks = <&nco_clkref>;
+ };
--
2.33.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v3 2/3] clk: clk-apple-nco: Add driver for Apple NCO
2022-01-21 17:55 [PATCH v3 0/3] Support for Apple SoCs' NCO blocks Martin Povišer
2022-01-21 17:55 ` [PATCH v3 1/3] dt-bindings: clock: Add Apple NCO Martin Povišer
@ 2022-01-21 17:56 ` Martin Povišer
2022-01-21 17:56 ` [PATCH v3 3/3] MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE Martin Povišer
2 siblings, 0 replies; 4+ messages in thread
From: Martin Povišer @ 2022-01-21 17:56 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt
Cc: marcan, sven, alyssa, linux-clk, devicetree, linux-kernel,
kettenis, Martin Povišer
Add a common clock driver for NCO blocks found on Apple SoCs where they
are typically the generators of audio clocks.
Signed-off-by: Martin Povišer <povik+lin@protonmail.com>
---
drivers/clk/Kconfig | 9 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-apple-nco.c | 333 ++++++++++++++++++++++++++++++++++++
3 files changed, 343 insertions(+)
create mode 100644 drivers/clk/clk-apple-nco.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index ad4256d54361..af4d037e18e3 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -59,6 +59,15 @@ config LMK04832
Say yes here to build support for Texas Instruments' LMK04832 Ultra
Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs
+config COMMON_CLK_APPLE_NCO
+ bool "Clock driver for Apple SoC NCOs"
+ depends on ARCH_APPLE || COMPILE_TEST
+ default ARCH_APPLE
+ help
+ This driver supports NCO (Numerically Controlled Oscillator) blocks
+ found on Apple SoCs such as t8103 (M1). The blocks are typically
+ generators of audio clocks.
+
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 16e588630472..e95e702bdaeb 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -17,6 +17,7 @@ endif
# hardware specific clock types
# please keep this section sorted lexicographically by file path name
+obj-$(CONFIG_COMMON_CLK_APPLE_NCO) += clk-apple-nco.o
obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
diff --git a/drivers/clk/clk-apple-nco.c b/drivers/clk/clk-apple-nco.c
new file mode 100644
index 000000000000..a7ef1db9c82b
--- /dev/null
+++ b/drivers/clk/clk-apple-nco.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Driver for an SoC block (Numerically Controlled Oscillator)
+ * found on t8103 (M1) and other Apple chips
+ *
+ * Copyright (C) The Asahi Linux Contributors
+ */
+
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define NCO_CHANNEL_STRIDE 0x4000
+#define NCO_CHANNEL_REGSIZE 20
+
+#define REG_CTRL 0
+#define CTRL_ENABLE BIT(31)
+#define REG_DIV 4
+#define DIV_FINE GENMASK(1, 0)
+#define DIV_COARSE GENMASK(12, 2)
+#define REG_INC1 8
+#define REG_INC2 12
+#define REG_ACCINIT 16
+
+/*
+ * Theory of operation (postulated)
+ *
+ * The REG_DIV register indirectly expresses a base integer divisor, roughly
+ * corresponding to twice the desired ratio of input to output clock. This
+ * base divisor is adjusted on a cycle-by-cycle basis based on the state of a
+ * 32-bit phase accumulator to achieve a desired precise clock ratio over the
+ * long term.
+ *
+ * Specifically an output clock cycle is produced after (REG_DIV divisor)/2
+ * or (REG_DIV divisor + 1)/2 input cycles, the latter taking effect when top
+ * bit of the 32-bit accumulator is set. The accumulator is incremented each
+ * produced output cycle, by the value from either REG_INC1 or REG_INC2, which
+ * of the two is selected depending again on the accumulator's current top bit.
+ *
+ * Because the NCO hardware implements counting of input clock cycles in part
+ * in a Galois linear-feedback shift register, the higher bits of divisor
+ * are programmed into REG_DIV by picking an appropriate LFSR state. See
+ * applnco_compute_tables/applnco_div_translate for details on this.
+ */
+
+#define LFSR_POLY 0xa01
+#define LFSR_INIT 0x7ff
+#define LFSR_LEN 11
+#define LFSR_PERIOD ((1 << LFSR_LEN) - 1)
+#define LFSR_TBLSIZE (1 << LFSR_LEN)
+
+/* The minimal attainable coarse divisor (first value in table) */
+#define COARSE_DIV_OFFSET 2
+
+struct applnco_tables {
+ u16 fwd[LFSR_TBLSIZE];
+ u16 inv[LFSR_TBLSIZE];
+};
+
+struct applnco_channel {
+ void __iomem *base;
+ struct applnco_tables *tbl;
+ struct clk_hw hw;
+
+ spinlock_t lock;
+};
+
+#define to_applnco_channel(_hw) container_of(_hw, struct applnco_channel, hw)
+
+static void applnco_enable_nolock(struct clk_hw *hw)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+ u32 val;
+
+ val = readl_relaxed(chan->base + REG_CTRL);
+ writel_relaxed(val | CTRL_ENABLE, chan->base + REG_CTRL);
+}
+
+static void applnco_disable_nolock(struct clk_hw *hw)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+ u32 val;
+
+ val = readl_relaxed(chan->base + REG_CTRL);
+ writel_relaxed(val & ~CTRL_ENABLE, chan->base + REG_CTRL);
+}
+
+static int applnco_is_enabled(struct clk_hw *hw)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+
+ return (readl_relaxed(chan->base + REG_CTRL) & CTRL_ENABLE) != 0;
+}
+
+static void applnco_compute_tables(struct applnco_tables *tbl)
+{
+ int i;
+ u32 state = LFSR_INIT;
+
+ /*
+ * Go through the states of a Galois LFSR and build
+ * a coarse divisor translation table.
+ */
+ for (i = LFSR_PERIOD; i > 0; i--) {
+ if (state & 1)
+ state = (state >> 1) ^ (LFSR_POLY >> 1);
+ else
+ state = (state >> 1);
+ tbl->fwd[i] = state;
+ tbl->inv[state] = i;
+ }
+
+ /* Zero value is special-cased */
+ tbl->fwd[0] = 0;
+ tbl->inv[0] = 0;
+}
+
+static bool applnco_div_out_of_range(unsigned int div)
+{
+ unsigned int coarse = div / 4;
+
+ return coarse < COARSE_DIV_OFFSET ||
+ coarse >= COARSE_DIV_OFFSET + LFSR_TBLSIZE;
+}
+
+static u32 applnco_div_translate(struct applnco_tables *tbl, unsigned int div)
+{
+ unsigned int coarse = div / 4;
+
+ if (WARN_ON(applnco_div_out_of_range(div)))
+ return 0;
+
+ return FIELD_PREP(DIV_COARSE, tbl->fwd[coarse - COARSE_DIV_OFFSET]) |
+ FIELD_PREP(DIV_FINE, div % 4);
+}
+
+static unsigned int applnco_div_translate_inv(struct applnco_tables *tbl, u32 regval)
+{
+ unsigned int coarse, fine;
+
+ coarse = tbl->inv[FIELD_GET(DIV_COARSE, regval)] + COARSE_DIV_OFFSET;
+ fine = FIELD_GET(DIV_FINE, regval);
+
+ return coarse * 4 + fine;
+}
+
+static int applnco_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+ unsigned long flags;
+ u32 div, inc1, inc2;
+ bool was_enabled;
+
+ div = 2 * parent_rate / rate;
+ inc1 = 2 * parent_rate - div * rate;
+ inc2 = inc1 - rate;
+
+ if (applnco_div_out_of_range(div))
+ return -EINVAL;
+
+ div = applnco_div_translate(chan->tbl, div);
+
+ spin_lock_irqsave(&chan->lock, flags);
+ was_enabled = applnco_is_enabled(hw);
+ applnco_disable_nolock(hw);
+
+ writel_relaxed(div, chan->base + REG_DIV);
+ writel_relaxed(inc1, chan->base + REG_INC1);
+ writel_relaxed(inc2, chan->base + REG_INC2);
+
+ /* Presumably a neutral initial value for accumulator */
+ writel_relaxed(1 << 31, chan->base + REG_ACCINIT);
+
+ if (was_enabled)
+ applnco_enable_nolock(hw);
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ return 0;
+}
+
+static unsigned long applnco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+ u32 div, inc1, inc2, incbase;
+
+ div = applnco_div_translate_inv(chan->tbl,
+ readl_relaxed(chan->base + REG_DIV));
+
+ inc1 = readl_relaxed(chan->base + REG_INC1);
+ inc2 = readl_relaxed(chan->base + REG_INC2);
+
+ /*
+ * We don't support wraparound of accumulator
+ * nor the edge case of both increments being zero
+ */
+ if (inc1 >= (1 << 31) || inc2 < (1 << 31) || (inc1 == 0 && inc2 == 0))
+ return 0;
+
+ /* Scale both sides of division by incbase to maintain precision */
+ incbase = inc1 - inc2;
+
+ return div64_u64(((u64) parent_rate) * 2 * incbase,
+ ((u64) div) * incbase + inc1);
+}
+
+static long applnco_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long lo = *parent_rate / (COARSE_DIV_OFFSET + LFSR_TBLSIZE) + 1;
+ unsigned long hi = *parent_rate / COARSE_DIV_OFFSET;
+
+ return clamp(rate, lo, hi);
+}
+
+static int applnco_enable(struct clk_hw *hw)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ applnco_enable_nolock(hw);
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ return 0;
+}
+
+static void applnco_disable(struct clk_hw *hw)
+{
+ struct applnco_channel *chan = to_applnco_channel(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ applnco_disable_nolock(hw);
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+static const struct clk_ops applnco_ops = {
+ .set_rate = applnco_set_rate,
+ .recalc_rate = applnco_recalc_rate,
+ .round_rate = applnco_round_rate,
+ .enable = applnco_enable,
+ .disable = applnco_disable,
+ .is_enabled = applnco_is_enabled,
+};
+
+static int applnco_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct clk_parent_data pdata = { .index = 0 };
+ struct clk_init_data init;
+ struct clk_hw_onecell_data *onecell_data;
+ void __iomem *base;
+ struct resource *res;
+ struct applnco_tables *tbl;
+ unsigned int nchannels;
+ int ret, i;
+
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (resource_size(res) < NCO_CHANNEL_REGSIZE)
+ return -EINVAL;
+ nchannels = (resource_size(res) - NCO_CHANNEL_REGSIZE)
+ / NCO_CHANNEL_STRIDE + 1;
+
+ onecell_data = devm_kzalloc(&pdev->dev, struct_size(onecell_data, hws,
+ nchannels), GFP_KERNEL);
+ if (!onecell_data)
+ return -ENOMEM;
+ onecell_data->num = nchannels;
+
+ tbl = devm_kzalloc(&pdev->dev, sizeof(*tbl), GFP_KERNEL);
+ if (!tbl)
+ return -ENOMEM;
+ applnco_compute_tables(tbl);
+
+ for (i = 0; i < nchannels; i++) {
+ struct applnco_channel *chan;
+
+ chan = devm_kzalloc(&pdev->dev, sizeof(*chan), GFP_KERNEL);
+ if (!chan)
+ return -ENOMEM;
+ chan->base = base + NCO_CHANNEL_STRIDE * i;
+ chan->tbl = tbl;
+ spin_lock_init(&chan->lock);
+
+ memset(&init, 0, sizeof(init));
+ init.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "%s-%d", np->name, i);
+ init.ops = &applnco_ops;
+ init.parent_data = &pdata;
+ init.num_parents = 1;
+ init.flags = 0;
+
+ chan->hw.init = &init;
+ ret = devm_clk_hw_register(&pdev->dev, &chan->hw);
+ if (ret)
+ return ret;
+
+ onecell_data->hws[i] = &chan->hw;
+ }
+
+ return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
+ onecell_data);
+}
+
+static const struct of_device_id applnco_ids[] = {
+ { .compatible = "apple,nco" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, applnco_ids)
+
+static struct platform_driver applnco_driver = {
+ .driver = {
+ .name = "apple-nco",
+ .of_match_table = applnco_ids,
+ },
+ .probe = applnco_probe,
+};
+module_platform_driver(applnco_driver);
+
+MODULE_AUTHOR("Martin Povišer <povik+lin@protonmail.com>");
+MODULE_DESCRIPTION("Clock driver for NCO blocks on Apple SoCs");
+MODULE_LICENSE("GPL v2");
--
2.33.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v3 3/3] MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE
2022-01-21 17:55 [PATCH v3 0/3] Support for Apple SoCs' NCO blocks Martin Povišer
2022-01-21 17:55 ` [PATCH v3 1/3] dt-bindings: clock: Add Apple NCO Martin Povišer
2022-01-21 17:56 ` [PATCH v3 2/3] clk: clk-apple-nco: Add driver for " Martin Povišer
@ 2022-01-21 17:56 ` Martin Povišer
2 siblings, 0 replies; 4+ messages in thread
From: Martin Povišer @ 2022-01-21 17:56 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt
Cc: marcan, sven, alyssa, linux-clk, devicetree, linux-kernel,
kettenis, Martin Povišer
Acked-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Martin Povišer <povik+lin@protonmail.com>
---
MAINTAINERS | 2 ++
1 file changed, 2 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 086f37a4763f..d6323083b695 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1765,6 +1765,7 @@ C: irc://irc.oftc.net/asahi-dev
T: git https://github.com/AsahiLinux/linux.git
F: Documentation/devicetree/bindings/arm/apple.yaml
F: Documentation/devicetree/bindings/arm/apple/*
+F: Documentation/devicetree/bindings/clock/apple,nco.yaml
F: Documentation/devicetree/bindings/i2c/apple,i2c.yaml
F: Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
F: Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
@@ -1776,6 +1777,7 @@ F: Documentation/devicetree/bindings/spi/apple,spi.yaml
F: Documentation/devicetree/bindings/usb/apple,dwc3.yaml
F: Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
F: arch/arm64/boot/dts/apple/
+F: drivers/clk/clk-apple-nco.c
F: drivers/i2c/busses/i2c-pasemi-core.c
F: drivers/i2c/busses/i2c-pasemi-platform.c
F: drivers/irqchip/irq-apple-aic.c
--
2.33.0
^ permalink raw reply related [flat|nested] 4+ messages in thread