[PATCH 2/4] clk: qcom: gcc-msm8998: add SSC-related clocks

[michael.srba@seznam.cz]

From: Michael Srba <Michael.Srba@seznam.cz>

 This patch adds four clocks which need to be manipulated in order to
 initialize the AHB bus which exposes the SCC block in the global address
 space.

 Care should be taken not to write to these registers unless the device is
 known to be configured such that writing to these registers from Linux
 is permitted.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
---
 drivers/clk/qcom/gcc-msm8998.c | 56 ++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 407e2c5caea4..2d14c3d672fc 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2833,6 +2833,58 @@ static struct clk_branch gcc_rx1_usb2_clkref_clk = {
 	},
 };
 
+static struct clk_branch gcc_im_sleep_clk = {
+	.halt_reg = 0x4300C,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4300C,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_im_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch aggre2_snoc_north_axi_clk = {
+	.halt_reg = 0x83010,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x83010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "aggre2_snoc_north_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch ssc_xo_clk = {
+	.halt_reg = 0x63018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x63018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "ssc_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch ssc_cnoc_ahbs_clk = {
+	.halt_reg = 0x6300C,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6300C,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "ssc_cnoc_ahbs_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc pcie_0_gdsc = {
 	.gdscr = 0x6b004,
 	.gds_hw_ctrl = 0x0,
@@ -3036,6 +3088,10 @@ static struct clk_regmap *gcc_msm8998_clocks[] = {
 	[GCC_MSS_MNOC_BIMC_AXI_CLK] = &gcc_mss_mnoc_bimc_axi_clk.clkr,
 	[GCC_MMSS_GPLL0_CLK] = &gcc_mmss_gpll0_clk.clkr,
 	[HMSS_GPLL0_CLK_SRC] = &hmss_gpll0_clk_src.clkr,
+	[GCC_IM_SLEEP] = &gcc_im_sleep_clk.clkr,
+	[AGGRE2_SNOC_NORTH_AXI] = &aggre2_snoc_north_axi_clk.clkr,
+	[SSC_XO] = &ssc_xo_clk.clkr,
+	[SSC_CNOC_AHBS_CLK] = &ssc_cnoc_ahbs_clk.clkr,
 };
 
 static struct gdsc *gcc_msm8998_gdscs[] = {
-- 
2.34.1